Recommended Posts

  • 2 weeks later...
Posted

I changed out another LED bulb yesterday.  That makes at least 8 A19 bulbs that have failed since the house was built 2 years ago.  And one of those was a replacement bulb.  Disappointing performance for what I think are name  brand bulbs.  The originals were Satco, and the replacements are GE Relax.  

  • Sad 1
Posted
On 11/22/2025 at 6:24 AM, Beechwood Chip said:

Every time I replace an LED bulb, I think "When did I install this?  Are they burning out too fast?  I  should remember to date them when I install them."

I use a permanent marker and jot the date on them.  I have had shop lights replaced a few times for free, motion lights on the outbuildings and patio lights as well.  They claim 50k hours but the things die in a year or so.  Keep your receipts.  Make them stand by their products the way we used to when we made stuff.

  • Like 1
  • Thanks 1
Posted
4 hours ago, Tpt life said:

Can you tell why they failed? Most premature LED failure is dirty power or failure to remove heat. 

No, I don't know.  I can't evaluate the power.  Most of the failures have been in the lights over the mirrors in the master bath.  Maybe relevant, but these are simple straight forward fixtures.  A set of 3  conical frosted glass shades, open at the bottom, one bulb in each.  

Posted

I haven't found any LED bulbs that impress me yet for longevity.  We replaced some burned out bulbs in the kitchen fixture a few days ago and they were compact fluorescents.  They were replaced with LED's, but I would bet no money that they last any good fraction of the time those compact fluorescents did.

  • Like 2
Posted
On 11/22/2025 at 4:05 PM, Tom King said:

I haven't found any LED bulbs that impress me yet for longevity.  We replaced some burned out bulbs in the kitchen fixture a few days ago and they were compact fluorescents.  They were replaced with LED's, but I would bet no money that they last any good fraction of the time those compact fluorescents did.

Agreed Tom. Ive replace most of the florescents in my shop with LEDs and they burn out frequently. 

I like the old florescents better. 

  • Like 1
Posted

I wonder if LED are tested without power cycling to get the numbers they do. I also wonder if the LED fails, or if the mini transformers do. Our worst performers ever were in vibration prone locations like ceiling fans. 

  • Like 1
Posted
3 hours ago, Mark J said:

 A set of 3  conical frosted glass shades, open at the bottom, one bulb in each.  

I have noted more frequent failures of lamps (bulbs) installed inverted,  with the base above the luminaire, and assume that is because heat rises. But the noted failures occurred more often with incandescents also.

  • Like 1
Posted
On 11/22/2025 at 6:37 PM, drzaius said:

I replaced about 30 4' tubes with LED tubes several years ago and have had no failures. I haven't had any of the A lamps fail either. I must live in a charmed LED bubble.

+1 I've got about a dozen 4' LEDs in the shop that are now 3+ years old with no failures.

Posted
13 hours ago, drzaius said:

I replaced about 30 4' tubes with LED tubes several years ago and have had no failures. I haven't had any of the A lamps fail either. I must live in a charmed LED bubble.

Are you using any particular brand?  I should also mention that we use warm (2800k) bulbs, if that makes any difference. 

Posted
On 11/23/2025 at 8:10 AM, Mark J said:

Are you using any particular brand?  I should also mention that we use warm (2800k) bulbs, if that makes any difference. 

Not to speak for drzaius, but I installed Utilitech 4' LED lights (2592125) 4000 Lumens 42 Watts (x8) that I bought at one of the local big box stores (Lowes I think).

  • Thanks 1
Posted
On 11/22/2025 at 5:37 PM, drzaius said:

I replaced about 30 4' tubes with LED tubes several years ago and have had no failures. I haven't had any of the A lamps fail either. I must live in a charmed LED bubble.

Mine are not bulb replacements, but units where the lamp and led lights are one unit. Maybe that's that difference. 

  • Like 1
Posted

I used Costco Feit LED shop lights in my shop.  Got them in 2020 but did have one fail.  Replaced under warranty and no additional failures.  It was disappointing though given the number of hours of use.

NewShop(325).jpg.d732153d602ab2fac33fd270fa7481ec.jpg

Mine are chain hung so that they are below the ceiling mounted DC ducting (no shadows). 

NewShop(357).jpg.a862f5ce74e9e206d2e7579afcbfc305.jpg

I use chain pulls in addition to wall switches as I generally only have about half of them on at a given time.

  • Like 2
Posted
3 hours ago, Mark J said:

Are you using any particular brand?  I should also mention that we use warm (2800k) bulbs, if that makes any difference. 

They are Eiko brand, 3500K. Color temp should make no difference.

  • Like 1
  • Thanks 1

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Who's Online   3 Members, 0 Anonymous, 71 Guests (See full list)

  • Forum Statistics

    32.1k
    Total Topics
    437.6k
    Total Posts
  • Member Statistics

    26,009
    Total Members
    3,644
    Most Online
    Joseph b
    Newest Member
    Joseph b
    Joined