Popular Post Ron Swanson Jr. Posted September 15, 2025 Popular Post Report Posted September 15, 2025 On 9/15/2025 at 2:10 PM, Von said: My big accomplishment for the day? There should be a reward for that. I suggest a new tool! 3 2 Quote
Popular Post gee-dub Posted September 16, 2025 Popular Post Report Posted September 16, 2025 On 9/15/2025 at 12:10 PM, Von said: My big accomplishment for the day? All hail Von, all hail Von 5 Quote
Popular Post Von Posted September 16, 2025 Popular Post Report Posted September 16, 2025 Finished cleaning up and sharpening all the Freud chisels and rebuilding the box to the point of being functional. I'm further convinced these chisels had never been used as they had a rubbery film on them that came off on sharpening, requiring lots of cleaning of my stones. Seem like good chisels, the backs are just a little concave, and they are made from a hard, "stretchy" steel - they form an elongated burr when sharpening, which I know sounds weird, but I'm having a hard time describing it. Each chisel was used to make it's slot in the new case. Going to keep them for a least a bit to decide if I want to keep them or my current chisels. Guessing I may never use half of them, but suspect it will be nice to have a particular size from time-to-time. 6 Quote
Popular Post Von Posted September 22, 2025 Popular Post Report Posted September 22, 2025 Thought deeply about wood movement... 5 1 1 Quote
Popular Post Ron Swanson Jr. Posted September 22, 2025 Popular Post Report Posted September 22, 2025 On 9/21/2025 at 7:12 PM, Von said: Thought deeply about wood movement... @Von You should probably take today off work to recover from such a taxing ordeal! 3 2 Quote
Popular Post Von Posted September 22, 2025 Popular Post Report Posted September 22, 2025 Heading out of town for a week so I cleaned up the shop. Rare sight, so a photo seemed in order. 6 Quote
gee-dub Posted September 23, 2025 Report Posted September 23, 2025 Wait . . . you have a floor!?! Looks great Von. I see you have an 11th finger push stick at the bandsaw. I do as well. I keep it stuck to the saw just as you do. Handy little bugger. 1 Quote
BillyJack Posted September 23, 2025 Report Posted September 23, 2025 I’m trying to score a tent on Marketplace for me and my grand daughter. Been trying also to find a Girl Scout troop as well for the grand daughter. This has ti pruned into a difficult task.. 1 Quote
Popular Post gee-dub Posted September 23, 2025 Popular Post Report Posted September 23, 2025 Final finish on the latest small project, fixed one of LOML's "potted plants" watering hoses out back, fixed the shower out by the spa that had developed an annoying leak, ran to the local mom-&-pop deli for an Italian sub for lunch, picked up and delivered a few groceries for my daughter who is a bit anchored at home with our new grandson. Just glad to be on this side of the grass and to be busy and useful 5 Quote
legenddc Posted September 23, 2025 Report Posted September 23, 2025 On 9/23/2025 at 1:22 PM, BillyJack said: I’m trying to score a tent on Marketplace for me and my grand daughter. Been trying also to find a Girl Scout troop as well for the grand daughter. This has ti pruned into a difficult task.. Check with her school if you haven't already, they may be able to point you in the right direction. I would also ask the leader of her school's PTA, they may not be in the troop but likely know someone who is. If not, https://mygs.girlscouts.org/search;type=TROOP 1 Quote
Ron Swanson Jr. Posted September 23, 2025 Report Posted September 23, 2025 Ugh. It's been one of those days. I stubbed my toe at 04:30 this morning and that's the best this day has gotten... I tried to get a new career, but apparently I'm not carnival material. 1 1 1 Quote
Popular Post pkinneb Posted September 23, 2025 Popular Post Report Posted September 23, 2025 Was walking through the shop over the weekend (haven't been in there for woodworking all summer due to yardwork and redoing our deck) anywho I noticed the pan that hangs on the bottom of the DC filter was sitting on the cabinets...that's not right. Upon looking further it appears the metal ring that was friction fit on the hard rubber gave way when the rubber broke in a few spots. Well I thought maybe I should buy a new one and get a sound filter as I have read good things. Well long story short after talking with Oneida's Tech Support I determined it would not fit in the space I had. So rather than replace a perfectly good filter for $559 I thought a would try a $3 tube of silicone...we shall see 6 Quote
Coop Posted September 24, 2025 Report Posted September 24, 2025 On 9/23/2025 at 11:58 AM, gee-dub said: I see you have an 11th finger push stick at the bandsaw. I do as well. I keep it stuck to the saw just as you do. Handy little bugger. I didn’t see it but glad you did. As an after thought, I constantly look for a push block, scrap or something or another, usually half way thru a cut. And a magnet! Please provide a link. 1 Quote
gee-dub Posted September 24, 2025 Report Posted September 24, 2025 On 9/23/2025 at 6:37 PM, Coop said: I didn’t see it but glad you did. As an after thought, I constantly look for a push block, scrap or something or another, usually half way thru a cut. And a magnet! Please provide a link. It is nothing special per se. Just a simple, handy, narrow, magnet attached pusher for small or thin items at the bandsaw. I think I got it as a promotional add-on back when it first came out but it has been a welcome addition when I need to easily grab something to push "that" right through "there" while keeping my pinkies clear. 2 Quote
Ron Swanson Jr. Posted September 24, 2025 Report Posted September 24, 2025 On 9/23/2025 at 3:59 PM, pkinneb said: Was walking through the shop over the weekend (haven't been in there for woodworking all summer due to yardwork and redoing our deck) anywho I noticed the pan that hangs on the bottom of the DC filter was sitting on the cabinets...that's not right. Upon looking further it appears the metal ring that was friction fit on the hard rubber gave way when the rubber broke in a few spots. Well I thought maybe I should buy a new one and get a sound filter as I have read good things. Well long story short after talking with Oneida's Tech Support I determined it would not fit in the space I had. So rather than replace a perfectly good filter for $559 I thought a would try a $3 tube of silicone...we shall see I hope you pull this one off, Paul. $560 for some pleated paper is highway robbery. (I have an equally obscene filter from a different manufacturer) 1 Quote
Mark J Posted September 24, 2025 Report Posted September 24, 2025 15 hours ago, pkinneb said: haven't been in there for woodworking all summer due to yardwork and redoing our deck Been wondering where you've been. Is the deck project going well? BTW, hear anything from @Chestnut? Quote
Popular Post gee-dub Posted September 24, 2025 Popular Post Report Posted September 24, 2025 On 9/23/2025 at 1:58 PM, Ron Swanson Jr. said: Ugh. It's been one of those days. I stubbed my toe at 04:30 this morning and that's the best this day has gotten... I tried to get a new career, but apparently I'm not carnival material. I am often amazed at how fast your foot moves when you walk; even slowly. Connecting with something that doesn't move, like a table leg, demonstrates the phenomena really well. 3 Quote
Popular Post pkinneb Posted September 24, 2025 Popular Post Report Posted September 24, 2025 On 9/24/2025 at 8:00 AM, Mark J said: Been wondering where you've been. Is the deck project going well? BTW, hear anything from @Chestnut? I have not but I believe he has two little ones now so that's probably why Re the deck the worst is over...I hope. Due to a failed hot tub I had to re structure the lower deck from an octagon hot tub to a round one which took some work then all the cuts around said hot tub took waaay longer then I expected becuase one side is captured between a step down (from the top deck) and the hot tub making those planks a real pain. Then I decided to go with a picture frame border which looks awesome but again was a bit of a PITA. Here is the original and the almost complete lower deck and a snap shot of the picture frame...notice my shop made spacers 6 Quote
Tom King Posted September 24, 2025 Report Posted September 24, 2025 On 9/21/2025 at 8:12 PM, Von said: Thought deeply about wood movement... That looks like our lake, except the shoreline is not lined with houses and boathouses. 1 Quote
Popular Post pkinneb Posted September 24, 2025 Popular Post Report Posted September 24, 2025 On 9/24/2025 at 7:27 AM, Ron Swanson Jr. said: I hope you pull this one off, Paul. $560 for some pleated paper is highway robbery. (I have an equally obscene filter from a different manufacturer) It worked just fine. Not sure how long it will last but I'd say quite a while based on my initial reaction definitely worth a shot given the cost of a new one 7 Quote
Ron Swanson Jr. Posted September 24, 2025 Report Posted September 24, 2025 On 9/24/2025 at 5:58 PM, pkinneb said: It worked just fine. Not sure how long it will last but I'd say quite a while based on my initial reaction definitely worth a shot given the cost of a new one Score one for the good guys! 1 Quote
Popular Post Tpt life Posted September 25, 2025 Popular Post Report Posted September 25, 2025 Paid earnest money, and appraisal money. Inspection money gets paid once it’s finished. Buying and selling houses is expensive. 6 Quote
Popular Post Coop Posted September 25, 2025 Popular Post Report Posted September 25, 2025 Unfortunately, the buyers and the sellers aren’t the bandits. 3 Quote
Mark J Posted September 25, 2025 Report Posted September 25, 2025 11 hours ago, Tpt life said: Paid earnest money, and appraisal money. Inspection money gets paid once it’s finished. Buying and selling houses is expensive. Did you get a buyer for your old house? Are you building a new home in FL or buying an existing house? Quote
Popular Post Tpt life Posted September 25, 2025 Popular Post Report Posted September 25, 2025 On 9/25/2025 at 9:01 AM, Mark J said: Did you get a buyer for your old house? Are you building a new home in FL or buying an existing house? Yes, we sold. We are buying existing this time. We want fewer payments than building and renting. The sale means a much smaller mortgage, so we hope to be debt free in a few years. Then we might consider building what we want. 6 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.