legenddc Posted July 28, 2025 Report Posted July 28, 2025 Had a fun weekend here. Went to an estate sale on Saturday with my daughter. Picked up a few board/card games and a brand-new sealed in box digital picture frame. Hung out at the pool for almost 4 hours with the kids and one of my daughter's friends. Sunday my son and I made and froze a bunch of breakfast sandwiches for the kids to reheat. I routed the grooves for the T-track into the router table. Need to order the star knobs, t-bolts and the dust collector adapter for the fence. Storms kept us from going back to the pool Sunday afternoon. I got some door/drawer parts rough cut for the built in cabinet. Need to make sure I have all the parts before final planning to thickness and width and cutting to length. 2 Quote
BillyJack Posted July 28, 2025 Report Posted July 28, 2025 Today’s my trip to the Dermatologist. Hopefully he can figure out my skin itch problem.Its kept me out of tye shop for almost 2 years.. 3 Quote
Popular Post Von Posted July 28, 2025 Popular Post Report Posted July 28, 2025 On 7/27/2025 at 8:28 PM, Ron Swanson Jr. said: One other thing @Von, not trying to beat a dead horse here but i noticed that your tails are going into the side grain for this particular holder. I find that to be much more difficult to cut then i seating them into end grain like in a box. If the lighter stuff showing is putty sitting on the surface, I'll bet they'll look like a million bucks if you sand or scrape that off. You are right, they do look better than I thought they would. Using non-contrasting wood helps :-) The visible oops is on the bottom edge of the tail where I forgot which side of the line to cut on and needed a shim to pull things together. 6 Quote
Popular Post Ron Swanson Jr. Posted July 28, 2025 Popular Post Report Posted July 28, 2025 On 7/28/2025 at 10:23 AM, Von said: You are right, they do look better than I thought they would. Using non-contrasting wood helps :-) The visible oops is on the bottom edge of the tail where I forgot which side of the line to cut on and needed a shim to pull things together. All i see is a well executed spokeshave till. Nicely done! 4 Quote
Popular Post Coop Posted July 29, 2025 Popular Post Report Posted July 29, 2025 On 7/28/2025 at 10:00 AM, BillyJack said: Today’s my trip to the Dermatologist. Hopefully he can figure out my skin itch problem.Its kept me out of tye shop for almost 2 years.. I got my stitches out last Thursday from my 8th Mohs procedure. Good luck. 3 Quote
legenddc Posted July 29, 2025 Report Posted July 29, 2025 Will medication help? I feel like psoriasis is one of the diseases I see drugs advertised for all the time on TV. Quote
Popular Post Beechwood Chip Posted July 29, 2025 Popular Post Report Posted July 29, 2025 On 7/29/2025 at 3:37 PM, legenddc said: Will medication help? I feel like psoriasis is one of the diseases I see drugs advertised for all the time on TV. I have psoriasis and psoriatic arthritis. I self-inject Humira once every two weeks. It keeps it from getting worse. The injections aren't bad, maybe a little more annoying than just taking a pill. 4 Quote
Mark J Posted July 30, 2025 Report Posted July 30, 2025 16 hours ago, Beechwood Chip said: It keeps it from getting worse. I thought these drugs were supposed to make it better? Quote
BillyJack Posted July 30, 2025 Report Posted July 30, 2025 Seems the art of woodworking is shrinking every year.All about the shop and less about the projects… Quote
Popular Post Ron Swanson Jr. Posted July 30, 2025 Popular Post Report Posted July 30, 2025 On 7/30/2025 at 8:06 AM, BillyJack said: Seems the art of woodworking is shrinking every year.All about the shop and less about the projects… That's how most people get started in the craft, by building a shop and things for the shop, to build skills needed to move on to more complicated builds. 3 Quote
BillyJack Posted July 30, 2025 Report Posted July 30, 2025 On 7/30/2025 at 9:05 AM, Ron Swanson Jr. said: That's how most people get started in the craft, by building a shop and things for the shop, to build skills needed to move on to more complicated builds. It’s about 80/20 on building. Many are more interested in the shop…Many finisgh the shop and don’t know what to do with it.. Quote
BillyJack Posted July 30, 2025 Report Posted July 30, 2025 Got a guy coming hopefully to buy my bar rail. Selling cheap. 1 Quote
Beechwood Chip Posted July 30, 2025 Report Posted July 30, 2025 On 7/30/2025 at 8:48 AM, Mark J said: I thought these drugs were supposed to make it better? When I started Humira my psoriasis and arthritis were much worse, and got better. But it plateaued, and now I take the Humira to keep things at the current level. I had actually forgotten how bad things were before I started Humira. 2 Quote
Popular Post Beechwood Chip Posted July 30, 2025 Popular Post Report Posted July 30, 2025 On 7/30/2025 at 9:06 AM, BillyJack said: Seems the art of woodworking is shrinking every year.All about the shop and less about the projects… I'm right at the transition. I have three projects going: one is the laptop desk thing, one is shop furniture (adding drawers to my router table cabinet), and one is a box joint jig that I need for a furniture project. I'm doing all three at once because each is with a different young friend. My insurance agent is checking with the underwriter to get me a price on insurance coverage. 4 Quote
Popular Post Von Posted July 30, 2025 Popular Post Report Posted July 30, 2025 Finished up the urn for my father today. It's the first time I've worked with Black Limba and I wasn't sure what to expect and hence I made two different tops (one matching and the other is cherry stained black) not knowing which would go best with the box. I'm going to go with the matching top as I think the black is too much. Thanks to everyone for their advice on the miters and the vertical jig for the top. 8 Quote
Ron Swanson Jr. Posted July 30, 2025 Report Posted July 30, 2025 On 7/30/2025 at 3:02 PM, Von said: Finished up the urn for my father today. It's the first time I've worked with Black Limba and I wasn't sure what to expect and hence I made two different tops (one matching and the other is cherry stained black) not knowing which would go best with the box. I'm going to go with the matching top as I think the black is too much. Thanks to everyone for their advice on the miters and the vertical jig for the top. Looks awesome Von!! Very nice!!! 2 Quote
Popular Post legenddc Posted August 2, 2025 Popular Post Report Posted August 2, 2025 It’s tax free weekend for back to school so we went out shopping this morning. School doesn’t start for 2 weeks but it’s done. Got into the shop after and assembled the router table fence. Need to cut the melamine and slots for the t bolts that will adjust it. Star knobs and t bolts will be here Monday. 7 Quote
Popular Post Tpt life Posted August 3, 2025 Popular Post Report Posted August 3, 2025 Going through boxes. We moved this week and are gradually finding most of what we need. As always, we are frustrated by a missing thing or two. This is just a little compounded by the need to be is some fairly small temporary housing, until our old home sells. As I hoped, my orchids like the space under the carport. I need another half week to adjust to the heat. I am 3/4 there. 7 Quote
Popular Post legenddc Posted August 4, 2025 Popular Post Report Posted August 4, 2025 Not sure why one of the pictures in my last post was upside down. Seemed to be correct when I uploaded it. Slowly making headway around the house. Yesterday I replaced the sink faucet in the kids bathroom. Managed to do it with no trips to the store which doesn't typically happen with a plumbing project. Gave a neighbor a 3 tier planter stand I made 5 years ago. We never seemed to plant anything in it and we were tired of looking at a planter full of weeds. Two of the cedar planters I made earlier this year will go to my in-laws this weekend. 7 Quote
Von Posted August 4, 2025 Report Posted August 4, 2025 I broke this plastic air deflector doohickey on the back of my PC BNA125A Brad Nailer at some point and today it fell off. So far I've only been able to find a replacement online as part of a whole Housing Cap assembly, which makes it a little pricey to replace at $35 for a piece of plastic. Anyone know what it's called, which might help me find it, or where to find it separately? Without this piece, one gets a rather annoying blast of air back in one's face each time one shoots a brad, so I'd like to replace it. TIA. 2 Quote
Popular Post Tpt life Posted August 5, 2025 Popular Post Report Posted August 5, 2025 https://a.co/d/4iRHZFm $16 on Amazon. 4 1 Quote
Von Posted August 5, 2025 Report Posted August 5, 2025 On 8/4/2025 at 8:53 PM, Tpt life said: https://a.co/d/4iRHZFm $16 on Amazon. Thanks! Knowing what it is called, I also found it for $12 on ebay: https://www.ebay.com/itm/186100542007 2 Quote
Mark J Posted August 5, 2025 Report Posted August 5, 2025 Apparently not the first time this part has broken. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.