fcschoenthal Posted yesterday at 04:45 AM Report Posted yesterday at 04:45 AM On 11/14/2026 at 8:51 PM, Coop said: There were 6 other ladies at the meeting and after seeing the crosses, each wanted one. I'm sure you've always been a hit with the ladies Coop, even without giving out crosses. They're a really nice project though. 2 Quote
Popular Post wtnhighlander Posted yesterday at 10:38 AM Popular Post Report Posted yesterday at 10:38 AM @pkinneb, those ballasts are transformers. Heavy because of the iron core and copper windings. You might actually get some $$ out of a metals recycler for them. @pkinneb, those ballasts are transformers. Heavy because of the iron core and copper windings. You might actually get some $$ out of a metals recycler for them. 2 1 Quote
Popular Post Von Posted yesterday at 11:36 AM Popular Post Report Posted yesterday at 11:36 AM 8 hours ago, pkinneb said: I have found a recycling center for the bulbs anyone know if the ballasts can go in the trash? What's in them that makes them so heavy? A quick web search tells me that ballasts made before 1979 might contain PCBs and should be treated as hazmat unless they specifically state "No PCBs." Those made in 1979 or later should be fine to recycle or scrap. FWIW, our local county recycling center takes "electronics" which would include ballasts. 3 1 Quote
Popular Post wtnhighlander Posted yesterday at 11:48 AM Popular Post Report Posted yesterday at 11:48 AM This morning, I routed a groove to serve as a miter slot in my freshly-built router table / saw wing. The aluminum channel, sold as 'plywood edging' at my local home center, is perfectly sized to fit my gaige bar, and will be glued in as a 'wear liner'. MDF core makes for a flat slab, but produces the nastiest dust! Once my TS revamp is finished, dust collection for mobile machines like routers is high on my todo list... 5 Quote
Popular Post legenddc Posted 23 hours ago Popular Post Report Posted 23 hours ago I need to cut some MDF soon and I'm not looking forward to it. I may go borrow my dad's track saw so I can do it outside. 5 Quote
Popular Post Tom King Posted 22 hours ago Popular Post Report Posted 22 hours ago MDF does make a lot of dust, but it does seem to be the easiest for a good DC to take away. With a 3hp DC we could cut MDF inside houses and not a bit of dust would get on anything. That did include a well sealed old Unisaw and an overarm dust arm. I always cut a piece of MDF if anyone asked to see how well it worked. My rule of thumb is anything less than 3hp is wishful thinking. 4 Quote
Von Posted 22 hours ago Report Posted 22 hours ago Not to argue, but I wouldn't want to dissuade anyone with <3 HP of DC from using it. I have nothing that powerful and while what I have is far from perfect, it does a lot of good. 1 Quote
Tom King Posted 22 hours ago Report Posted 22 hours ago Yes, it's intended for first design. I don't even wear a dust mask when using the table saw. 1 Quote
Popular Post Beechwood Chip Posted 21 hours ago Popular Post Report Posted 21 hours ago The last time I had to route a significant amount of MDF, I opened the door to my shop, positioned a window fan in the door way as exhaust, positioned a pedestal fan between the work and the doorway, ran both air filters, hooked a shop vac to the router, and wore a respirator. Better safe than sorry. I've found that a dust extractor hooked to the router works well with MDF, but I'd still wear a respirator. Oddly, when I cut MDF on my table saw, I didn't even think about dust. I've got a Harvey Gyro hooked to the dust port and a shop vac hooked to the blade guard. I like the idea of doing it outside. A home made circular saw guide will work. 4 Quote
Popular Post Tom King Posted 18 hours ago Popular Post Report Posted 18 hours ago I always try to pick the right day with a decent wind from the right direction for sanding outside. I'll still wear supplied air, but it saves a lot of cleanup. When I was building new houses, a lot of jobs were done outside and one of my two helpers jobs was to keep a 120V leaf blower sending dust or chips downwind as they were created. When we did dovetailed drawers for cabinets (last house had 48 drawers) the router jig would get clamped to the railing on a deck or porch that the wind was blowing across. One helper would man the blower and the other helper would hand and help hold the parts that had all been laid out on tables behind us. No cleanup required with a little help from an air hose at the end of the process. 4 Quote
Popular Post legenddc Posted 15 hours ago Popular Post Report Posted 15 hours ago On 11/18/2026 at 10:27 AM, Beechwood Chip said: A home made circular saw guide will work. I do have one of those, but have gotten so spoiled borrowing the track saw that I forgot I have it. If the weather cooperates, I will cut it outside. After looking at the weather forecast for the next 10 days, I think I will be putting out Christmas decorations this weekend. Much nicer to do when it's in the 60s instead of the 40s. 3 Quote
Dave H Posted 12 hours ago Report Posted 12 hours ago I've been using a hill billy saw guide for at least 40 yrs an old timer ( look who's talking) was using one on a job sight. And I was hooked, I use mine in the shop, and on a job sight. I'm sure I wood fall in love with a track saw but I don't need one. 2 Quote
pkinneb Posted 10 hours ago Report Posted 10 hours ago Got another bank of lights converted to LED's Just have these two at the front of the shop and I need to decide if I'm going to do the two fixtures in the spray room now or wait until there's an issue. 4' bulbs should be here tomorrow. 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.