gee-dub Posted October 3 Report Posted October 3 LOL . . . Most of the year our humidity is pretty low. You know that old saying about how "it's a dry heat"; well it's true. We are at the tail end of our high humidity index and at about 7:30pm my time we are currently 26%. I remember being at a business meeting in Scottsdale, AZ one time. I was walking through the pool area in a suit and tie on the way to the convention auditorium thinking what wonderful weather we were having for the event. That's when I heard someone say "can you believe it is 103"!?! Everything is relative. 90 degrees in Houston, TX or Fairhope, AL is brutal due to the humidity. Out here it's just 90 . . . 2 Quote
legenddc Posted October 3 Report Posted October 3 It was 85 here yesterday. We went to a concert with friends of ours last night and the venue was a bit toasty. I don’t know if they had the AC on or at least fully functioning. Still had a great time. 1 Quote
pkinneb Posted October 3 Report Posted October 3 On 10/2/2026 at 3:39 PM, gee-dub said: Enjoyed our current cooling trend. This is about 9:45 am. Whoa! Quote
Popular Post Von Posted October 4 Popular Post Report Posted October 4 Really enjoyed helping a friend today re-assemble his Japanese-style shed. Not one mechanical fastner to be found - all interlocking wooden joints. He originally built it in Oregon, disassembled and moved it across country, and we (a crew of eight) re-assembled it without a hitch. Someday I hope to build something as cool. An example of a keyed tenon. (All the pieces were wrapped in paper to help protect them during the move.) Setting the joists into place. They have mortises that fit over long tenons in the vertical posts. 10 Quote
Popular Post Sergio Escudero Posted October 7 Popular Post Report Posted October 7 Shield making days! These last few days I've been applying the facing on a couple of shields. The bigger shield has a layer of hide on the outer face and still has another one to put on the inside. This shield measures 128x64cm in width, although now it has flattened and measures 68cm; when I glue the parchment on the inner face it will curve inward again. It currently weighs 3435 grams. The thickness of the wood is 7mm. The other shield has a layer of thick linen on the outer face and over this another layer of parchment. It measures 106x60cm currently, I hope it will open a couple of centimeters over the following days. Its current weight is 3150g. This one measures 5mm thick in the wood. The wood of both shields is glued with glue made from milk, but the covering is glued with hide glue. The good thing about this glue is that it is very light because it evaporates much of the initial water. Had I used white glue the shields would weigh 1kg more. I still have work ahead of me, and another couple of shields more for this week. P.S. the wood cores are homemade plywood in three layers. They are made with poplar slats that I saw myself and measure between 1.5-3mm, depending on which layer and which shield. The central layer has thicker and wider slats than the outer ones. Around 60 slats per shield. 8 Quote
Popular Post gee-dub Posted October 7 Popular Post Report Posted October 7 @Sergio Escudero - Love the shields and the project journal getting from 'A' to 'Z'. I have been hammering away at the door frames and panels for the current project. There's not much to it but I tend to run out of gas after 4 or 5 hours now. Not like when I was a youngster of 65 . Anyway, I will post some pics in the build journal thread later today. 4 Quote
Popular Post Von Posted October 8 Popular Post Report Posted October 8 Our woodworking club visited a local timber framing company. This is their main workshop room, it was originally built to be shipping and receiving for a sock manufacturer (the manufacturing space burned down). They get S4S timbers shipped in from a mill on the west coast. They do the design, joinery, and assembly. The assembled, darker pieces you see towards the back are from a big customer who flaked on them a number of years ago. They get pulled apart when parts are useful, but since the wood is now dry, their usage is limited. In the corner, hard to see in the photo, is a round cylinder they made as a form for a spiral staircase. Demo mortise done by chainsaw mortiser and a router, with chisel clean up. I asked how they lay out big arcs like this and the answer is a nail into a grout joint on the floor to make a plywood template. I fell in love with their drill guide. Only about $1000. The metal lathe caught my eye. They employ a full-time metal fabricator for custom connectors, brackets, etc. 12 Quote
Ron Swanson Jr. Posted October 8 Report Posted October 8 Very cool!!! I would've enjoyed that field trip!! 1 Quote
Popular Post gee-dub Posted October 8 Popular Post Report Posted October 8 How much fun is that? This thing: Is like a steady rest for a brace . . . wow. 3 Quote
Popular Post pkinneb Posted October 9 Popular Post Report Posted October 9 3D Printed a 90 degree saw guide. Been a while since I have cut DT's so this should help get me back in the flow. 7 Quote
Popular Post legenddc Posted October 10 Popular Post Report Posted October 10 Took yesterday off and got at it first thing in the morning. Started a pork butt cooking in the oven and then got a coat of paint on the shelves. Loaded up the car with a dead subwoofer, worn out clothes and my neighbors lawn mower to bring to the dump. Watched a kids thing at their school, then to the dump, and a couple other stores. Back home and another coat of paint on the shelves. Today I will sand the shelves and start on the final coat. Would have been done a week ago but the color didn't match my son's bed. Second color is very close. 4 Quote
Popular Post Ron Swanson Jr. Posted October 11 Popular Post Report Posted October 11 Had my class on ADDING DETAIL with Garrett Hack today. It was really great. A few words on the instructor: He is a very kind and exceptionally humble man. He learned everyone's name (15 of us) and I never heard him ask anyone to repeat their name once. He took a few minutes with each person to learn a little about them and seemed genuinely interested in learning a little bit about each person. He said he's taught in 14 different countries and used to spend 100 or so days a year on the road teaching. He's also a full time farmer in Vermont. Great, great guy. Really can't say enough about him. The class. Started with a quick sharpening lesson and hand plane mechanics. I was happy when I got a good assessment of my plane Setup and technique, though he said I still need to do a better job sharpening. I *thought* that that was one of my stronger areas. Guess not. One thing he said is that the "sharp test" of shaving arm hair really doesn't tell you much, and recommended using your fingernail instead. Indeed, when I compared the edge of his plane to mine, there was a noticeable difference there. The class was mainly about making a scratch stock to do a side bead and a string inlay. We reach got a small piece of steel to create the profile. I bought one of his blocks to hold it, instead of making one, as I liked that his had a nice thumb screw installed already. A few other odds and ends: 1. He said he chamfers absolutely EVERY edge in a project, even interior components. He said "If a customer pulls a drawer out and has to reach inside, I don't want them touching a sharp edge.". He's a big chamfer advocate and spoke on it quite a bit. 2. He often changes the amount of chamfer on a single piece, going from wide to narrow. 3. He pointed out that a chamfer is similar to a facet on a diamond and reflects light differently, adding appeal. Big chamfer guy. 4. The spiral shaving from when you first start a chamfer is called a SPILL and back in the day was used to move a flame from the hearth to light the candles and lamps in the room. He did traditional inlay and then did one using shell. Oh the coolest detail of them all, and I wish I had a picture, but his signature on his his pieces is to inlay a series of short, alternating black and white pieces. It's actually his name spelled out in morse code. I thought that was super cool. I feel like there's a ton I'm forgetting, but those are the main takeaways. I'm absolutely kicking myself for not taking his week long table class that starts tomorrow. I didn't know what I was thinking, but I missed the boat on that one. 9 Quote
Mark J Posted October 12 Report Posted October 12 14 hours ago, Ron Swanson Jr. said: I'm absolutely kicking myself for not taking his week long table class that starts tomorrow Maybe it will be offered again in the future. The class sounds fantastic. Where was it given, again? 1 Quote
Popular Post Ron Swanson Jr. Posted October 12 Popular Post Report Posted October 12 On 10/12/2026 at 7:46 AM, Mark J said: Maybe it will be offered again in the future. The class sounds fantastic. Where was it given, again? It was through the MN Woodworkers guild, and it was held in a Maker's Space in Maplewood MN. It was called a "visiting master" class, so I'm hoping that there will be more Masters visiting in the future!! 3 Quote
Popular Post legenddc Posted October 12 Popular Post Report Posted October 12 Sounds like an awesome class! I finished painting the bookshelf yesterday. Will spend some time today cleaning up the painting supplies. I figure by the weekend the paint will have had enough time to cure and we can bring it into my son's room then. Hopefully the shelf pins still fit in the holes and I don't need to trim the shelves. Wasn't expecting 4 layers of paint. 3 Quote
Popular Post pkinneb Posted October 12 Popular Post Report Posted October 12 On 10/11/2026 at 5:34 PM, Ron Swanson Jr. said: ... I'm absolutely kicking myself for not taking his class I debated...but now kicking myself as well 3 Quote
Popular Post Jfitz Posted October 13 Popular Post Report Posted October 13 Finally decided on where to put my router lift. I went with the table saw extension table - my shop is small and the only other place I really had room for a free standing one is just 24" wide. I had it in the extension table in my old shop, and it worked well for me - but I had to cut the rails to fit here, and decided to go back to the stock Sawstop table (still new in box). 6 Quote
Popular Post gee-dub Posted October 13 Popular Post Report Posted October 13 On 10/12/2026 at 5:59 AM, Ron Swanson Jr. said: It was through the MN Woodworkers guild, and it was held in a Maker's Space in Maplewood MN. It was called a "visiting master" class, so I'm hoping that there will be more Masters visiting in the future!! I have made a couple of Garrett’s pieces over the years and find him to be inspiring and instructive. Check out the videos of him learning about planes in Japan. Good stuff. Here is my version of his small wall/tool cabinet in cherry and pecan. It lives over my sharpening station and under one of the wall racks for lumber and holds all my spare plane irons, shave irons and the like. I really enjoy wall cabinets and have a few laying around the house waiting for somewhere to be mounted. I have given a couple as gifts since it seemed like they would set around till the end of time. I don't have room for all of them; I just like making them P.s. I used a shop made scratch stock for the bead on the crown of the prototype made from pallet wood and some old pine. I was going to trash it but, like some other things that should never have met the public eye, someone made off with it and it is on his shop wall. I deny its existence 7 Quote
legenddc Posted October 16 Report Posted October 16 On 10/13/2026 at 2:11 PM, Jfitz said: Finally decided on where to put my router lift. I went with the table saw extension table - my shop is small and the only other place I really had room for a free standing one is just 24" wide. I had it in the extension table in my old shop, and it worked well for me - but I had to cut the rails to fit here, and decided to go back to the stock Sawstop table (still new in box). What are your plans for the fence? Quote
Popular Post Jfitz Posted October 16 Popular Post Report Posted October 16 On 10/16/2026 at 9:05 AM, legenddc said: What are your plans for the fence? I have a separate "router table fence" with a dust collection port on it. I mount it to the table saw fence. Crude but usable for now. I plan to make a better adjustable mount so I can fine tune more easily. I had never run into an issue where I needed the table saw while being set up for a routing operation. If it arises, I'll look into different router fence options. 4 Quote
drzaius Posted October 16 Report Posted October 16 On 10/13/2026 at 12:11 PM, Jfitz said: Finally decided on where to put my router lift. I went with the table saw extension table - my shop is small and the only other place I really had room for a free standing one is just 24" wide. I had it in the extension table in my old shop, and it worked well for me - but I had to cut the rails to fit here, and decided to go back to the stock Sawstop table (still new in box). You're going to want to put some reinforcing underneath that table, otherwise it's gonna sag over time. The factory tables are built to a pretty minimal standard. 2 Quote
Popular Post Jfitz Posted October 16 Popular Post Report Posted October 16 On 10/16/2026 at 12:23 PM, drzaius said: You're going to want to put some reinforcing underneath that table, otherwise it's gonna sag over time. The factory tables are built to a pretty minimal standard. Yeah, that's on my plan. I did check out the supports and actually, since I cut it down, the remaining supports are "not bad". But now that the lift and DC box are installed, I'll add some additional supports. As I recall, the SS tables are notoriously "not flat" - but honestly, they don't need to be machinist-level flat. 3 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.