Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

What did you do today?

Featured Replies

  • Popular Post

Well it's been a good day.

Started with an "inspection" at the shop of @pkinneb. You'll be glad to know his shop is first rate across the board, and has produced prodigious amounts of beautiful, tasteful furniture throughout the home. I had a great time and I thank you, Paul, for your hospitality. 

Then, on my way home, about 3 blocks from my house, I found this being given away on the side of the curb. I guess it's my time for finding vacuum cleaners, but unlike the shop vac I found a few weeks ago, this one works. 

I purposely have avoided festool in the past, mainly because I don't have the wallet for it. But I may have to revise that policy. It came with a bunch of attachments, a spare filter and a box of bags. I haven't really looked closely at it besides turning it on to verify it works. 

20261101_140122.thumb.jpg.100dd90e4b57151af7a5f1779e706465.jpg20261101_140126.thumb.jpg.365cd14e9393c4c56c0f4ec19fca981a.jpg20261101_140128.thumb.jpg.af0ea1af4b792ec7820d3ef99984d82f.jpg

 

  • Replies 9.5k
  • Views 943.6k
  • Created
  • Last Reply

Top Posters In This Topic

Most Popular Posts

  • My DIL has a sister (lives on the other side of the country) who is an extremely unfit parent, so they have taken on legal guardianship of he 7 YO son. So now I am his defacto grandfather. His other g

  • Finally finished my uncles 2022 Xmas gift! Its an amy.makes.everything (Instagram) design that I copied. Sapele and Basswood. Hand chip carved as well as lathe turned pins. 

  • Bar Stool Done.  

Posted Images

On 11/1/2026 at 2:14 PM, Ron Swanson Jr. said:

Well it's been a good day.

Started with an "inspection" at the shop of @pkinneb. You'll be glad to know his shop is first rate across the board, and has produced prodigious amounts of beautiful, tasteful furniture throughout the home. I had a great time and I thank you, Paul, for your hospitality. 

Then, on my way home, about 3 blocks from my house, I found this being given away on the side of the curb. I guess it's my time for finding vacuum cleaners, but unlike the shop vac I found a few weeks ago, this one works. 

I purposely have avoided festool in the past, mainly because I don't have the wallet for it. But I may have to revise that policy. It came with a bunch of attachments, a spare filter and a box of bags. I haven't really looked closely at it besides turning it on to verify it works. 

20261101_140122.thumb.jpg.100dd90e4b57151af7a5f1779e706465.jpg20261101_140126.thumb.jpg.365cd14e9393c4c56c0f4ec19fca981a.jpg20261101_140128.thumb.jpg.af0ea1af4b792ec7820d3ef99984d82f.jpg

 

Nice find!!

  • Popular Post

Quite a find!!

I got the hardest part of the bathroom in the barn apartment behind me today.

The ceiling in what used to be the tackroom had R19 fiberglass in the 2x10 hayloft joists above.  I didn't want to get into that any more than I absolutely had to, so put two layers of 2" foam under the fiberglass and pushed it up with a lightweight floor jack and 2x4 T.   I was able to almost avoid the fiberglass completely except for a couple of places.

We will furnish electricity for the rental with a subpanel off our house panel, so I'm insulating the hell out of it.

Bathtubs come pretty efficient at losing heat quickly.  This $25 special from our ReStore will now hold hot water longer and better than most.

I'll fit the studs tomorrow.  I had enough working over my head for a Sunday.

image.thumb.jpeg.423ade30571e9b528dec6b0c70f4c783.jpeg

image.thumb.jpeg.f83de32b597288d75fc4e9a3e466651a.jpeg

  • Popular Post

@Ron Swanson Jr., amazing! You will love it. It’s so much quieter than my old shop vac and I live the auto-on feature. 
 

Killed a bunch of time when I was getting tires. Bought a 1/2” straight but from Rockler and recessed some holders for some Festool Systainers. 

IMG_9289.thumb.jpeg.451a82fa316ecf673122a727cad788fb.jpeg

  • Popular Post
56 minutes ago, legenddc said:

@Ron Swanson Jr., amazing! You will love it. It’s so much quieter than my old shop vac and I live the auto-on feature. 
 

Killed a bunch of time when I was getting tires. Bought a 1/2” straight but from Rockler and recessed some holders for some Festool Systainers. 

IMG_9289.thumb.jpeg.451a82fa316ecf673122a727cad788fb.jpeg

I hooked it up to my bandsaw and honestly I can't even hear it over the saw. I wasn't even sure if was actually running at first!!

  • Popular Post

Finished the framing for the bathroom today.  The new floor is nice and level, but the 45 or 46 year old rest of the pole barn has gotten pretty wonky.  Every stud was a different length by a little bit, but it'll be okay when it's finished.  I decided to wait until tomorrow to do the wiring and maybe put the celling up.

There is a big door behind the plumbing end of the tub where the hay drop used to be.  I'm leaving the door in the aisleway operable in case the plumbing behind the tub ever needs to be accessed.  There will be two layers of 2" foam where the door is, which supposedly is R20 total, but the inner layer is solid foam, so it should be plenty good enough.

image.thumb.jpeg.64c93edb34b834baa1bf0b4c58285e70.jpeg

  • Popular Post

Finished cleaning up the back yard after the neighbor's 83rd birthday get together.  Grape jelly and BBQ meatballs, southern fried chicken, dirty spaghetti (two variations), tater salad, fire pit, s'mores, cake, pie, and ice cream . . . It took me till about noon today to be able to move enough to put the chair cushions back in the deck boxes.

20 hours ago, Beechwood Chip said:

Today I learned that Stonehenge was built with mortise and tenon joints.  The vertical stones have tenons on their tops, and the lintel stones have mortises.

Interesting.  I did not know that. 

  • Popular Post
On 11/3/2026 at 8:40 AM, Mark J said:

Interesting.  I did not know that. 

One of the two mortises is a slot.  I guess you really don't want to get a two ton stone up there and find out that your mortise was off by a couple inches.

1 hour ago, Beechwood Chip said:

One of the two mortises is a slot.  I guess you really don't want to get a two ton stone up there and find out that your mortise was off by a couple inches.

Yeah, not a good time to practice dovetails.

  • Popular Post
On 11/3/2026 at 7:58 PM, wtnhighlander said:

Apparently, Stonehenge was 'restored' in the 1950s. Looks very different now, compared to paintings from a few centuries ago.

Tom Scott did a video on Nebula on Stonehenge, which is where I learned this stuff.  Should be out on YouTube next week.  Interviewed the head conservationist.  They talk about conservation, the kinds of damage, and the issues of restoration vs just letting it erode and fall apart.

  • Popular Post

Following up on a couple odds and ends...

After finding a good video on the Drill Doctor, I tried it again with apparent success. Certainly a lot quicker and better than I could do by hand. It's earned it's space in the shop.

PXL_20261104_155304910.thumb.jpg.9d3d2e65828753f5839dcb8e9e9a523b.jpg

I finished the baking on the hand plane japanning and even baked it for an extra hour at 450 degrees and the it's still tacky to the touch and markable with a finger nail. I'm perplexed. I'm guessing my recipe is off somehow. Since I'm in no hurry, I plan to let it sit for a couple months and see if it sets on its own. It appears thick enough now though it's a little rough, but that's probably my fault as I forgot to sand between coats.

PXL_20261104_162944306.thumb.jpg.aa1cf74764562ecd17b1072570f95c2d.jpg

22 minutes ago, wtnhighlander said:

Good use for 3D prints, I suppose. Table is cool, but looks like it required a small forest of raw material. Wonder how many times his DC got emptied?

It looks a bit like a forest from the side. I think it only looks nice through the top. 

On 11/1/2026 at 12:14 PM, Ron Swanson Jr. said:

Then, on my way home, about 3 blocks from my house, I found this being given away on the side of the curb. I guess it's my time for finding vacuum cleaners, but unlike the shop vac I found a few weeks ago, this one works. 

That's a heck of a find.  I wonder if the person that placed it on the curb didn't know what they had.  Oh well that's like money in your pocket.

  • Popular Post
13 minutes ago, Chet said:

That's a heck of a find.  I wonder if the person that placed it on the curb didn't know what they had.  Oh well that's like money in your pocket.

So the guy was actually just setting it out when I pulled up. And he didn't seem to speak any English at all. 

It had a free sign on it, but I wanted to make sure, so I kept asking him "It's ok to take??" And he didn't seem to understand me at all. 

Finally I pointed at the unit, pointed to myself, pointed to my truck and gave a thumbs up for confirmation. He just walked away. I moved very slowly gathering and loading it. He didn't seem to care at all. I even waited in my truck for a few min before driving off. 

I might have felt like I should check with someone who could understand me better if it hadn't had a Free sign on it. 

Definite drill doctor fan here. It has more than paid for itself over the years.

 I have been working through finishing the finish on the current project.

  • Popular Post

Got the tub surround installed and the plumbing rough in for it finished together today.  I don't follow the normal construction method of one trade following another.  I do a lot of them together.

An example is ceiling boxes for lights and such.  I set whatever mount is required for a box, leave the wire where I can get to it and install the box after the ceiling is up.  I do the same for wall boxes, but use old work boxes and install them as whatever wall finish surface goes up.  I can do a better fit of things like that.  I know it doesn't matter, but it also eliminates the worry of getting a hole in exactly the right place later.

A big 1/2" right angle drill can throw you off a ladder when a big bit or holesaw grabs, so I use a helper with a lightweight HF aluminum floor jack and a 2x4 to supply the upward pressure.  I stand on an appropriate height platform ladder, place the bit in the right starting place, then the helper operates the jack to ease the drill up and all I have to do is counteract the torque.  A sharp bit is much safer than a dull one for this job too.  Pam operated the floor jack after I got everything ready.  It only took us a couple of minutes after I called her to help.

The tub surround cost more than I could have done it with tile and backer board, but I'm not entirely sure the old pole barn structure will do no future moving, and this was quicker anyway.

Ready to wrap the walls up now.

I like to do plumbing walls a little thicker than normal with full width plates and staggered 2x4's on each side.  It gives more room to get the pipes in and a good place to use old crooked studs.  You only have to straighten one side on the jointer to use them.  My house framing, after the first one, has always included the use of a jointer.

image.thumb.jpeg.137028eae2f63fb4bf8faa4153d69804.jpeg

image.thumb.jpeg.ee86fb7885cd91f3c5fb3f52ab7cdd05.jpeg

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,009 Total Members
  • 3,644 Most Online
  • Joseph b Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.