Recommended Posts

Posted
On 9/29/2026 at 2:24 PM, Chestnut said:

Lumber run in the dealer loaner. Pickup is out for a week plus on clutch recall repair.

My '18 Audi Cabriole (immaculate, just 37K on the clock) got out this morning, broken power window cable.  Their sales dept had a cash offer to buy it from me, wasn't interested.  Adjusted the seat back, drove north, stopped at a red light at Antelope Drive, started readjusting the outside mirrors andBAM!, got rear-ended.  

We exchanged info, I insisted on calling the cops as her temp tag was expired; found out she was uninsured and gave me an incorrect phone #.  Paperwork starts tomorrow.

BotchLuck™.  Sigh...

  • Sad 8
Posted

For cross cut saws, I can't see a real need for more than 1 or 2 TPI configurations. The cuts are usually short, so even a very fine saw is not much of an issue, and a smooth cut is nice.

Maybe a 5 tpi for rough timber work, and a 8 or 9 tpi for finish work? The finer cross cut should be good for your multi-layered shields, I would think. Cross-cut teeth seem to leave a cleaner cut in plywood.

  • Like 1
Posted

In my experience, I don't have a need for multiple saws with varying tpi options when it comes to hand and panel saws, because they're never ever the last teeth to touch the work piece.

They're more of a roughing tool in my shop.

Cross cuts get refined on the shooting board, rip cuts get refined with a jointer plane. 

The stock I work with is overwhelmingly either 8/4 or 4/4. You want a minimum of 4 teeth across the thickness of your board. 

I have 3-4 hand saws and I really only use 2 of them - I filed rip and 1 xcut.

 

And, one last thing, don't be afraid of filing/sharpening crosscut. Yes you're introducing fleam but it's really not that difficult. 

 

Best of luck to you. 

 

  • Like 2
Posted
On 10/1/2026 at 6:50 PM, Beechwood Chip said:

A friend texted me asking if he could borrow a 10" pity knife.  He meant "putty knife", but he's from Arkansas and uses speech to text.  Anyway, I sent him this link:

It's a "dagger of mercy" in English, but I think "Pity knife" is a reasonable translation. 

Now I’m going to have to look up the names of the blades used by mid-20th-century Japanese, both to commit hara-kiri and the guy standing behind him, to lop his head off to end his suffering (a part of the technique a lot of folks are unaware of).  I read The Fall of Japan, by William Craig (half a century ago, damn I’m old!), a General Anami (iirc) couldn’t find a “second” as the war was coming to a close, and committed hara-kiri in his garden, without one.  

Disemboweling oneself will result in death, but with your lungs, heart and brain still functioning, it had to be a painful, long death; yikes!  

  • Sad 3
Posted

7 pt. is my coarsest crosscut saw.  I can crosscut a Spruce 2x4 in 6 strokes with it.  I don't have any need for a coarser one.  I do have one with coarser different shaped teeth designed for cutting down living trees with, but it doesn't cut boards.

4-1/2 and 6 pt. have me covered with rip handsaws.

I mostly use 8 pt. and 10 pt. crosscut saws.  Only rarely do I use a 12 pt. for finish cuts in hardwood trim boards in houses.  10 pt. does siding.  8 pt. general crosscuts that aren't finish cuts.

  • Like 2

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Who's Online   0 Members, 0 Anonymous, 50 Guests (See full list)

    • There are no registered users currently online
  • Forum Statistics

    32.1k
    Total Topics
    437.6k
    Total Posts
  • Member Statistics

    26,009
    Total Members
    3,644
    Most Online
    Joseph b
    Newest Member
    Joseph b
    Joined