Popular Post drzaius Posted October 17 Popular Post Report Posted October 17 I tossed the factory table & made my own out of 3 layers of 18mm baltic birch, laminated together with plastic laminate top & bottom. Then made templates to perfectly cut out for my Excalibur router lift. Truly a thing of beauty. Just as I got that finished, a local tool store put their stock of Excalibur cast iron tables on clearance for $99. Ugh, I was so tempted to get the cast iron. 5 Quote
Popular Post gee-dub Posted October 18 Popular Post Report Posted October 18 Had a great family and neighbor get together. Pizza, s'mores over the fire pit, fruit and veggies for snacks. Good time. 5 Quote
Popular Post Tpt life Posted October 18 Popular Post Report Posted October 18 Mini fall beak. At the beach with my other half. It’s good to get out of town now and then. 6 Quote
Popular Post Ron Swanson Jr. Posted October 18 Popular Post Report Posted October 18 Yesterday was the Annual Expo for the MN Woodworkers Guild. A very fun day of fellowship! 7 Quote
Popular Post pkinneb Posted October 18 Popular Post Report Posted October 18 On 10/18/2026 at 8:05 AM, Ron Swanson Jr. said: Yesterday was the Annual Expo for the MN Woodworkers Guild. A very fun day of fellowship! It was Great to meet you in person!! Thanks again for the half blind DT demo. Sorry if I put you on the spot but I found it very helpful for me on my current project 5 Quote
Ron Swanson Jr. Posted October 18 Report Posted October 18 On 10/18/2026 at 5:26 PM, pkinneb said: It was Great to meet you in person!! Thanks again for the half blind DT demo. Sorry if I put you on the spot but I found it very helpful for me on my current project Not at all, my friend!! 2 Quote
Popular Post gee-dub Posted October 19 Popular Post Report Posted October 19 You lucky so-and-so's. I have had the pleasure of meeting forum members here and there over the years. Always been a pleasure. I once drove over 100 miles out of my way to visit a guy while I was on a family visit out of state. Well worth it. If any of your guys are in this general area 'https://www.google.com/maps/@34.0322851,-117.4268757,13.25z?authuser=0&entry=ttu&g_ep=EgoyMDI2MTAxMy4wIKXMDSoASAFQAw%3D%3D' and fail to stop by I will hunt you down. 6 2 Quote
Popular Post Ron Swanson Jr. Posted October 19 Popular Post Report Posted October 19 On 10/18/2026 at 8:50 PM, gee-dub said: You lucky so-and-so's. I have had the pleasure of meeting forum members here and there over the years. Always been a pleasure. I once drove over 100 miles out of my way to visit a guy while I was on a family visit out of state. Well worth it. If any of your guys are in this general area 'https://www.google.com/maps/@34.0322851,-117.4268757,13.25z?authuser=0&entry=ttu&g_ep=EgoyMDI2MTAxMy4wIKXMDSoASAFQAw%3D%3D' and fail to stop by I will hunt you down. @gee-dub I shall be at your door on December 1, staying until mid May or until we're back over 50° consistently. Hide the valuables and the breakables! 6 Quote
Popular Post Chestnut Posted October 19 Popular Post Report Posted October 19 Busy here its this time of year. But my wife talked me into a 3d printer as well. Been complementing woodworking with it and they are an amazing tool. Just organization stuff so far. I like the idea of setup blocks and spacers. The brackets below were my design from the ground up. 8 Quote
Popular Post legenddc Posted October 19 Popular Post Report Posted October 19 There are loads of cool things you can 3D print that are already designed and free. I've searched for all sorts of random items and found some cool stuff. I had my dad print a wall hanging electric toothbrush holder for my kid's bathroom. Solved the problem of cords all over the sink. Had some spare time yesterday while my wife and kids were out at a ropes and zipline course. I cut up a bunch of scraps and tossed them into a trash bag. Decided to start on another project. Not sure if I damaged my jointer blades with a piece of curly maple or if they were already damaged and I missed it before. Seems the first 1" or so is worn down enough to create a step. Was trying to mill wider board so I couldn't shift the fence over. After looking at some helical heads for it, I ordered replacement straight blades. Didn't want to spend $400 with everything else going on now. My wife just left for a work trip until Friday around 6 AM. Going to be a long and busy week between work and kids activities. 6 Quote
Popular Post gee-dub Posted October 19 Popular Post Report Posted October 19 Rockin' to some Andy Timmons this morning while working out some joinery on the current project. I don't play the guitar but I know people who do and I appreciate the instrument in everything from classical to shred. In the video he looks like he has a bit of an attitude but when you see him in interviews he is very humble, accommodating, and sharing about his craft. More smiles than scowls. 6 Quote
Popular Post Tom King Posted October 20 Popular Post Report Posted October 20 I had left the scaffolding set up where I put the White Oak siding up on the back of the house to paint the soffit and fascia after the hot weather broke. Fall finally got here, so I have that done and have been working my way around the side of the house redoing the windows. Completely stripped all the old paint off, put in new glass where needed and painted with SW Rain Refresh gloss. I don't know that I had ever painted them since I built this part of the house in 1980. All the wood and hardware was still fine. The little roofs had been Cedar Shakes. They were still shedding water, but after I pulled one piece out from under the siding, half of the thickness had eroded away. I just pulled all the old shakes off, put on a couple of layers of the sticky backed rubber-like window flashing tape, and put on some leftover Cypress shingles. I need to pressure wash this end of the house. The rest of the house doesn't have the black mildew on it. The last time I pressure washed the house I left bleach on the other part I did, but not this part, to see what it did. That was something over ten years ago, but I forget exactly. The part I had left the bleach on is a nice silver. I'll do that to this end when I get around to up. The mildew is just sitting on the surface, but the wood is still hard as a rock. This is the original part of the house, before there was such a thing as stainless steel nail gun nails. 5 Quote
Popular Post Ron Swanson Jr. Posted October 21 Popular Post Report Posted October 21 Must be my lucky day. I use a shop vac for dust collection on my bandsaw. So I have to disconnect it when I want to use it for other purposes. I have 2 hoses for it, one stays mounted to the saw, the other is used for for more normal purposes. Anyway, it's a pain in the butt always having to disconnect it. Rolled into a customer this morning and they were throwing this one out. They said it works fine. It's just missing 1 wheel. 7 Quote
Popular Post Mark J Posted October 21 Popular Post Report Posted October 21 Yah gotta like that! 3 Quote
Popular Post pkinneb Posted October 23 Popular Post Report Posted October 23 Hard to believe I blew/ vacuumed the leaves up late yesterday... 4 Quote
Popular Post Ron Swanson Jr. Posted October 24 Popular Post Report Posted October 24 Today I'll be taking a tour of, and likely joining, a local Maker's Space. Winter is rapidly approaching here in MN, and that has meant the end of woodworking season for me in the past. A comfortable, warm place to work over the winter months sounds pretty good. They also have a lot of other stuff beyond the woodshop: a machine shop, CNC, laser cutters, even a blacksmith shop. Tons of new ways to get myself into trouble! 5 Quote
Popular Post Tom King Posted October 24 Popular Post Report Posted October 24 Not just to prove that I actually don't suffer from Leonardo Da'Vinci Syndrome, I finished a project yesterday. Even put all the scaffolding up and tools back where they should be. Now that the weather is nice working weather, I'll go back to work on the barn apartment probably today. The to-do list here is no shorter though. Redoing the windows and soffit and fascia painting just came up in front of everything else because of circumstances. The black mildew on this end of the house is just sitting on the surface and brushes off pretty easily. It can wait until I rent a lift next Spring for other jobs before it gets pressure washed. Our house sits back in the woods with no neighbors, so being rustic is not really out of place. It was built mostly out of scraps, leftovers, and recycled materials. When I built it one Summer in 1980, we borrowed $10,000 to buy windows and roofing. This is a 1980 Pella window. I'm glad we didn't put the extra money in aluminum clad or inside the glass blinds. 7 Quote
Popular Post Von Posted October 24 Popular Post Report Posted October 24 A personal update: my hip continues to get worse, very much limiting my shop time and other physical activity at this point. Next step is clear: hip replacement and I've got the surgery scheduled for January. This will be my second replacement, I had the other hip done ~10 years ago, so we know the ropes and I'm hoping it goes as well as my first one. Not sure I'll do anything significant woodworking wise before then besides winterizing the shop. Given the lack of actual woodworking, I suspect I'm going to be spending more time on the forum. Everyone is welcome to their own opinion about that :-) 7 Quote
Mark J Posted October 24 Report Posted October 24 1 hour ago, Ron Swanson Jr. said: They also have a lot of other stuff beyond the woodshop: a machine shop, CNC, laser cutters, even a blacksmith shop. Sounds like a great place, I'm jealous. We used to have something similar, but they went out of business. 1 Quote
Popular Post Mark J Posted October 24 Popular Post Report Posted October 24 @Von, sorry to hear about your hip. Hopefully it's not too bothersome between now and the surgery, and your recovery will be speedy. 2 1 Quote
Chet Posted October 24 Report Posted October 24 On 10/24/2026 at 6:07 AM, Von said: A personal update: my hip continues to get worse, very much limiting my shop time and other physical activity at this point. Next step is clear: hip replacement and I've got the surgery scheduled for January. This will be my second replacement, I had the other hip done ~10 years ago, so we know the ropes and I'm hoping it goes as well as my first one. I am sure you know this from having one hip replacement but after surgery, PT is your best friend. 1 1 Quote
Popular Post gee-dub Posted October 24 Popular Post Report Posted October 24 Touched up a few errant spots on the current project. Years ago I bought this set. I also bought a couple of colors of these. Despite our diligence we occasionally miss something that becomes very apparent as soon as the first coat of finish is applied. These pens allow you to blend things in before coat 2 and by coat 3 or 4 all is well. Shhhh, don't tell. 6 Quote
legenddc Posted October 24 Report Posted October 24 Washed my wife's car today, it was filthy. Haven't had a chance to clean the interior yet. Did take out the middle section of the rear seat because my wife and daughter managed to lose the car keys in the car. I couldn't find them anywhere under the front seats so I took a guess. The 14mm bolts holding the rear seat bottom down were very tight. I managed to get them out with a long reach 3/8" ratchet. For a few seconds I thought I was going to need a 1/2 breaker bar or my 1/2 impact wrench. 1 Quote
Popular Post Ron Swanson Jr. Posted October 24 Popular Post Report Posted October 24 On 10/24/2026 at 8:11 AM, Mark J said: Sounds like a great place, I'm jealous. We used to have something similar, but they went out of business. Boy I didn't know the half of it. They've got shops for 20 different disciplines, Woodworking, metal working, blacksmithing, CNC, 3D printing, electronics Lab, screen printing, ceramics, lapidary, leatherwork, knitting, sewing, graphic arts, painting, sculpture and a whole bunch of other stuff. I'm a little worried about my redneck self fitting in, as it's a very artistic community, but as long as some speak Woodworking, we will get along just fine. 3 Quote
Popular Post legenddc Posted October 24 Popular Post Report Posted October 24 Installed my replacement jointer knives. The Rockler jointer pals jig makes it super quick. Ran a few test boards through it and everything seems to be lined up and working nicely. Need to check the jib bolts to make sure they’re still tight. 3 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.