Recommended Posts

Posted
On 12/5/2025 at 9:24 PM, Coop said:

My next to favorite tree on our property was a burr oak until a tornado decided to take it down almost 3 years ago. My wife used the huge acorns for decoration at Thanksgiving. Although planted in the center of the yard, the storms rotation carried it to where it created minor damage to the house.

IMG_5278.thumb.jpeg.29bb7ab2cb64373cba8dc71c066e3a66.jpeg
IMG_5279.thumb.jpeg.b350cb5b211ae48977ee26fd315e1956.jpeg

Ouch that left a mark!! Wow glad you and your family are ok. That had to be scarry!

  • Like 1
  • Sad 1
Posted

It's not the wire.  It burned up inside the crimp connector.  It's a 10 ga. stranded wire so plenty big enough for its job, but the original connector and the one I put in it last time were really cheaply and poorly made.  Hopefully the one I put in there today will last better.

It's a 2009 off brand unit that I had never heard of before, but hopefully it will last another year or several.  As long as the fixes are as easy as this one, I'll nurse it along.

  • Like 2
Posted

Tried to plane some boards over lunch but my planer is acting up again. It randomly won't pull boards through and they have to be forcefully pushed/pulled out. No rhyme or reason besides it tends to happen more frequently with wide boards. I cleaned the rollers, waxed the bed and even changed the knives but that doesn't seem to help for long, maybe a few boards max. After tripping a circuit breaker a second time today I got fed up and ordered a Dewalt 735X on sale for $550. Guess I'm not working on these drawers until Sunday.

Heading out in an hour to bring my daughter to dance and then Ace Hardware to pick up 3 saw blades I had sharpened. 

  • Like 2
  • Sad 4
Posted

Buying a new planer is a fast and easy fix!

 

Yes, I thought about soldering, but it also might spew solder inside if it gets hot enough and burn a hole in something else.  The original one and only crimp connectors I could get locally last time were not much more than the typical ones for 16 ga. wire.  The ones I ordered online were for 10 ga. and have a lot more metal in them so they might last better and definitely give more contact area in the crimp.

I expect the old compressor is getting to the point that it's asking for more amperage to start.  One of the many reasons we were able to get this house so cheap was because it had two non-working heat pumps.   I've gotten almost six years out of them since then, so can't complain if I have to replace it next week.

No one is staying in it until next Summer, and the one in the other end is working fine, so no real hurry about swapping it out if we need to.  That house also has gas logs in the fireplace that we can use if both fail and it gets below freezing.

The last time it failed was in really cold weather too.

I've already figured out which R32 unit I'm going to get if we have to upgrade from Supplyhouse and their shipping is pretty quick.  It's not a major concern.  I was just really glad that it turned out to be the same thing as last time.  I was prepared for it, and didn't have to spend a bunch of time troubleshooting it.

  • Like 2

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Who's Online   2 Members, 0 Anonymous, 71 Guests (See full list)

  • Forum Statistics

    32.1k
    Total Topics
    437.6k
    Total Posts
  • Member Statistics

    26,009
    Total Members
    3,644
    Most Online
    Joseph b
    Newest Member
    Joseph b
    Joined