Von Posted January 16 Report Posted January 16 On 1/15/2026 at 8:47 PM, Coop said: Apologies but who and where was a recent post about Klingspor shipping special. I did a search and the most recent was 2022. It turns up when I search for "shipping" but not "kling" *shrug*. 1 Quote
legenddc Posted January 16 Report Posted January 16 On 1/15/2026 at 8:47 PM, Coop said: Apologies but who and where was a recent post about Klingspor shipping special. I did a search and the most recent was 2022. 2 Quote
Popular Post Von Posted January 17 Popular Post Report Posted January 17 I used Evapo-Rust for the first time and I'm happy with the results. I had been using vinegar to clean old tools, but I was finding it is too harsh. It was fine for basic situations, but it was eroding some metal coatings and causing some thin metals under tension (e.g. the spring on a divider) to break. The Evapo-Rust did a nice job cleaning up this old hand plane. Better job than the vinegar I'm confident. Not much of a test of it's gentleness, but a good first trial. Before. Not super rusty but well covered in surface rust, dirt and some paint. After a couple of days soaking, all the rust and dirt was gone and the paint took just a little brushing. 7 Quote
fcschoenthal Posted January 17 Report Posted January 17 I've used Evapo-Rust a couple of times. Mostly did a great job. I'm surprised that yours turned out so well after a couple of days of soaking. I had a couple of pieces turn dark in it when I left them in too long. 2 Quote
Von Posted January 17 Report Posted January 17 I intended to leave them just overnight but got distracted, which I expect will be typical for me. I meant to mention that I've read in forums for restoring old watches, with their very small delicate metal parts, that Evapo-Rust can damage those parts, similar to what I found with the divider spring and vinegar. So it's not full-proof, but I don't expect anything is. I've destroyed parts without assistance. 2 Quote
Popular Post legenddc Posted January 18 Popular Post Report Posted January 18 Went to my son's basketball game yesterday, baked a brownie pie with my daughter and went out with her for a while to sell Girl Scout cookies. Managed to final sand two more drawers and get them installed. 5 Quote
Popular Post Mark J Posted January 18 Popular Post Report Posted January 18 Brownie batter backed in a pie tin. 3 Quote
Popular Post gee-dub Posted January 19 Popular Post Report Posted January 19 I woke up with a sore neck and back. I accused the wife of beating on me while I slept. She just looked at me deadpan and said "That was just the love-taps getting a little heavy. If I start beating on you, you'll know it". . . . Yep, I married that 2 6 Quote
Popular Post Ron Swanson Jr. Posted January 19 Popular Post Report Posted January 19 Woke up to a -40 windchill this morning. Got to work where all equipment is frozen and grumpy. Going to be a long week. If any Floridians in here need a butler until mid May, I'm your man. 5 2 Quote
Popular Post Tpt life Posted January 19 Popular Post Report Posted January 19 I can make a space for you to sleep. What’s your trade? I can start looking for seasonal job leads. Full disclosure, there was frost in my grass in the shade this morning. None in the sun. Curly Oak and I are currently living with our outdoor plants at the moment. The dining room table is full of orchids and other tender plants. Not sure how crowded his place is. 5 Quote
Popular Post Ron Swanson Jr. Posted January 19 Popular Post Report Posted January 19 On 1/19/2026 at 9:55 AM, Tpt life said: I can make a space for you to sleep. What’s your trade? I can start looking for seasonal job leads. Full disclosure, there was frost in my grass in the shade this morning. None in the sun. Curly Oak and I are currently living with our outdoor plants at the moment. The ding room table is full of orchids and other tender plants. Thanks! Unfortunately I'm way too entrenched in my frozen home state of Minnesota to ever seriously consider leaving it. Though days like today do get me fantasizing about it. 2 1 Quote
Popular Post legenddc Posted January 19 Popular Post Report Posted January 19 On 1/18/2026 at 10:01 AM, Tpt life said: Brownie pie? My first time making this. We followed a recipe from this cookbook that we borrowed from the library. I was supposed to be getting healthy cookbooks but saw this and came home with it. My kids like a show on Netflix called Bake Squad and she wrote this book. 5 Quote
Popular Post pkinneb Posted January 19 Popular Post Report Posted January 19 On 1/19/2026 at 9:29 AM, Ron Swanson Jr. said: Woke up to a -40 windchill this morning. Got to work where all equipment is frozen and grumpy. Going to be a long week. If any Floridians in here need a butler until mid May, I'm your man. On the bright side the sun is out and we can see it for the first time in a while 4 Quote
Coop Posted January 20 Report Posted January 20 On 1/19/2026 at 10:51 AM, legenddc said: My first time making this. We followed a recipe from this cookbook that we borrowed from the library. I was supposed to be getting healthy cookbooks but saw this and came home with it. My kids like a show on Netflix called Bake Squad and she wrote this book. Was hoping the link lead to the recipe. That looks darn good. 2 Quote
Popular Post Botch Posted January 20 Popular Post Report Posted January 20 On 1/19/2026 at 8:29 AM, Ron Swanson Jr. said: Woke up to a -40 windchill this morning. Got to work where all equipment is frozen and grumpy. Going to be a long week. If any Floridians in here need a butler until mid May, I'm your man. Just a quick note, Florida has gotten more snow this year than we have in Utah. 3 1 1 Quote
Popular Post legenddc Posted January 20 Popular Post Report Posted January 20 On 1/19/2026 at 8:42 PM, Coop said: Was hoping the link lead to the recipe. That looks darn good. Here you go. There are some recipes online here: https://milkbarstore.com/blogs/recipes It was weird baking with grams instead of cups/teaspoons but I got used to it quickly. We'll be making some cookies from the book this weekend. 3 Quote
Popular Post Von Posted January 20 Popular Post Report Posted January 20 I recently managed to magnetize my calipers enough that small things were sticking to it and being annoying. My local hardware store ordered me a cheap magnetizer/de-magnetizer than ran me <$4. I wondered how these things work and found this video that explains it fairly well, though with a fancier version of the magnetizer. In a nutshell, and with my own imprecise language, these magnetizers are made of two magnets held together facing each other. Between the magnets, in the hole, they cooperate to create a strong magnetic field that magnetizes tools. On the outside of the magnets, the magnets interfere with each other and create a mixed magnetic field that will demagnetize a tool. Following the directions, I ran my calipers on the outside of the demagnetizer and it definitely weakened the magnetism, but didn't get rid of it. What I had to do, taking a hint from the steps on the fancier version of the demagnetizers, was slowly move the calipers and demagnetizer further apart as I waved them over each other. That got rid of the magnetism (or more accurately reduced it to a negligible level). A attempt to show the demagnetizer in use with one hand holding the camera. Imagine one hand is holding the calipers instead of the camera and I'm moving the demagnetizer back and forth over the calipers in the orientation shown and then slowly moving them apart. Before photo. No after photo since it's just a boring photo of the calipers with the metal lying on the workbench. 6 Quote
Popular Post Coop Posted January 21 Popular Post Report Posted January 21 I have several jigs that I saved that I have no idea why I built them. I’m going to chunk them. If I find that I need them, if I built them once, I can build them again. 6 Quote
Popular Post Tpt life Posted January 21 Popular Post Report Posted January 21 I have a cell phone teardown kit, (great little screw drivers for a band room) that has a magnetization and demagnetization set of wells, in the case. I don’t keep that at home in my shop, but often choose tools at home based on how screws stick on drivers, vs magnetic catchment etc. Good video. 3 Quote
legenddc Posted January 21 Report Posted January 21 Sad day yesterday. Our local hardwood, plywood and cabinetry shop is closing. Now my options are super expensive local places, Rockler or a 90 minute drive each way. One of the two hardwood dealers isn’t open on weekends either so that would require taking a day off of work. Really going to miss a local place you could call or email and actually get a response on if they have what you need in stock. 1 6 Quote
pkinneb Posted January 21 Report Posted January 21 On 1/21/2026 at 6:51 AM, legenddc said: Sad day yesterday. Our local hardwood, plywood and cabinetry shop is closing. Now my options are super expensive local places, Rockler or a 90 minute drive each way. One of the two hardwood dealers isn’t open on weekends either so that would require taking a day off of work. Really going to miss a local place you could call or email and actually get a response on if they have what you need in stock. I hear you! I lost mine several years ago and have yet to find anything close as a replacement. 3 Quote
Popular Post Von Posted January 21 Popular Post Report Posted January 21 On 1/20/2026 at 8:54 PM, Coop said: I have several jigs that I saved that I have no idea why I built them. I’m going to chunk them. If I find that I need them, if I built them once, I can build them again. I completely get the appeal of having a jig on hand, well-designed and general purpose, that I made and serves me at a moment's notice. I also completely get that one can make a lot of jigs, specific to a job, very quickly. Especially with practice, knowing a a few techniques, and a stash of appropriate scrap on hand. One bit of advice from a local friend: if he saves a jig, he writes his name, the date, and the jig's purpose on it. 3 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.