Mark J Posted December 12, 2025 Report Posted December 12, 2025 11 hours ago, legenddc said: New rollers for it are over $200 so might as well just replace it. I have off next week and want to work in the shop. Someone will get a nice deal on the old one. It's an early Christmas present. After all, you were a really good boy this year. 1 Quote
Popular Post legenddc Posted December 12, 2025 Popular Post Report Posted December 12, 2025 On 12/11/2025 at 9:58 PM, Coop said: Is the old one a 735? If not, or even if so, you’re going enjoy the new one. I know a bunch on here have bigger and better but I’m highly satisfied with mine. I just baby it a tad and only take a qtr turn on the crank after each pass. No, it's a Ridgid R4331 that I bought refurbished in March of 2020 for $225. My dad has the same planer even longer, without any issues. Last time I took it all apart and couldn't find anything that appeared to be broken or not operating properly. I wouldn't object to a bigger planner but I can't run 220v tools space is at a premium in my tiny shop. Haven't seen anything decent on the used market. The new Grizzly G0999 benchtop planer was tempting but a lot more expensive. I typically take 1/4 turn passes (1/64") unless it's a narrow board. Do you change the speed or just stick with one? On 12/12/2025 at 8:35 AM, Mark J said: It's an early Christmas present. After all, you were a really good boy this year. Let's hope so. I did tell my wife to return anything she had for me. If I make good progress on these built-in cabinets next week while she's out of town I think all will be forgiven. 5 Quote
Tom King Posted December 12, 2025 Report Posted December 12, 2025 You got your money's worth out of that one. 2 Quote
Popular Post Coop Posted December 12, 2025 Popular Post Report Posted December 12, 2025 I very seldom ever change the speed. Usually on high and then to the drum sander. 3 Quote
Von Posted December 12, 2025 Report Posted December 12, 2025 On 12/10/2025 at 7:07 PM, Tom King said: It's not the wire. It burned up inside the crimp connector. It's a 10 ga. stranded wire so plenty big enough for its job, but the original connector and the one I put in it last time were really cheaply and poorly made. Hopefully the one I put in there today will last better. It's a 2009 off brand unit that I had never heard of before, but hopefully it will last another year or several. As long as the fixes are as easy as this one, I'll nurse it along. I don't think you need to hear this, but I need to say it: be careful, this is a fire hazard. I've thrown away stuff for less. Sounds like there is arcing going on at the connection and you definitely don't want that. As someone else suggested, solder if in doubt. 1 Quote
Popular Post Tom King Posted December 12, 2025 Popular Post Report Posted December 12, 2025 While the insides of heat pump air handlers may not fit the strict definition for being "fireproof", everything in them is fire resistant enough that few homes are burned down when stuff inside them burns in two, which happens all the time. I'm not an electrical engineer, and don't remember where the amperage draw cutoff is for where soldering is no longer recommended, but I would not feel comfortable soldering this 30 amp connection. It's protected by a series of breakers, but none kicked off when the old connections failed. The outside unit just stopped coming on and it went to using Aux heat strips only. Every connection in such air handlers are just crimped connectors. The crimped fitting I put there this time was much more substantial than any other one in it that was put in when the air handler was manufactured. I feel better about that than having possible spewing solder in there. While it would be fairly simple to replace just the air handler, I really don't want to stick with R410a, and changing to R32 like I want to do next would require changing both units and probably the lineset too. The lineset for this one will be not a simple job. If that connection burns up with this newest connector, I think we'll go ahead and do the big conversion, but it's not something I want to get into if we can avoid it because I have a lot of other stuff going on right now. Any electrical engineers here stating an opinion would be welcomed. 3 Quote
Popular Post Coop Posted December 13, 2025 Popular Post Report Posted December 13, 2025 On 12/12/2025 at 2:50 PM, Tom King said: Any electrical engineers here stating an opinion would be welcomed. Yes but I book at $115.50 per hour. And please give me a little notice cause I keep forgetting the difference between amps and voltage and will have to go back thru my sticky notes to review them. 4 Quote
Tpt life Posted December 13, 2025 Report Posted December 13, 2025 This feels like a corrosion issue, but without being on site…how could I say for certain. I think you have the tools to check for parasitic leaking, but my suspicion would be inappropriate material in the crimp connectors from the factory. I’ve been burned by plumbing fittings that were sold as brass, but were electro-plated junk, and suffered galvanic corrosion in short order. 1 Quote
Von Posted December 13, 2025 Report Posted December 13, 2025 I'm glad you have the expertise to handle this and I'm not meaning to dispute that. And you are right, I don't understand the situation well enough to give advice such as soldering and I shouldn't have. My reason for saying something was I worry someone with less experience will come along and infer such a situation not being one of concern. Thanks for treating it seriously. Quote
Popular Post Mark J Posted December 14, 2025 Popular Post Report Posted December 14, 2025 My wife and I were driving our 2018 Ridgeline, headed to the lighting store, when out of the blue I get a message on the dashboard: Transmission System Problem. No abnormal noises or driving behavior. No additional information on the dash, just "problem". No idea if I need to pull into the nearest parking lot, or if this is something that can wait a few days. So my wife googles it and finds this youtube video that explains that 2017 & 2018 Pilots and Ridgelines are prone to a torque converter failure, and that Honda is aware and has an extended warranty (10 y / 150k miles). So we decide to abandon the errands, and head to the Honda dealership service department which was still open. They weren't able look at the car for a couple of days, but did give us a loaner. Finally got the call from them and the problem was a crack in the torque converter, so it was covered under the warranty, which is a relief because I was told it would have been a $5000 repair job. It was inconvenient but not a terrible experience, but man I'm glad we were just running errands and not on a road trip. 7 Quote
Popular Post Coop Posted December 14, 2025 Popular Post Report Posted December 14, 2025 Good things happen to good people. Meaning the warranty and not the problem. We evacuated about 7 years ago due to a major hurricane that was headed our way. We headed east to NOLA as did 150 million others and it took 21 hours to make an ordinary trip that would have taken 5 1/2 hours. Two weeks after we returned home, my alternator went out. The timing was perfect! 6 Quote
Popular Post Tom King Posted December 14, 2025 Popular Post Report Posted December 14, 2025 The alternator in my truck is 23 years old. When it was two years old I noticed on my way home one day that it wasn't charging by the gauge. I stopped at the NAPA store, without turning the truck off, and bought one. When I turned the truck off when I got home sure enough it wouldn't start. I put a charger on the batteries overnight and swapped out the alternator. That one is still giving a full charge 23 years later. Now that I've talked about it, tomorrow will probably be the end of it. 4 1 Quote
Mark J Posted December 14, 2025 Report Posted December 14, 2025 Part of me wants to say this should have been a recall rather than an extended warranty. 2 Quote
Tom King Posted December 14, 2025 Report Posted December 14, 2025 Thanks for reminding me about alternators. I'm going to buy one and put it in the toolbox on my truck. I've never heard of one lasting 23 years before. 1 Quote
legenddc Posted December 14, 2025 Report Posted December 14, 2025 Went to my daughter's Nutcracker performance yesterday afternoon. She did a wonderful job. Then we swung by my parent's house so I could bring my dad's planer over to my house. Forgot how heavy they are. The planer I ordered to be here today isn't coming until Tuesday. I need to have some words with Amazon. Heading out soon for the second performance. Have a bunch of family coming today to watch. My parent's are hoping to make it but their flight was delayed so I don't think they'll make it. On 12/14/2025 at 10:48 AM, Mark J said: Part of me wants to say this should have been a recall rather than an extended warranty. Good on them for even having an extended warranty. When my Nissan transmission went, Nissan corporate covered the rebuild despite it being past warranty. The dealership was well versed in dealing with corporate on the issue. I was glad to have it fixed instead of a $5,500 rebuild, but it died 6 hours from home. Later there was a class action lawsuit. 2 Quote
Popular Post NikolaiFedorov Posted December 16, 2025 Popular Post Report Posted December 16, 2025 On 1/11/2018 at 4:01 PM, new2woodwrk said: Many forums, and one of my favorite threads in them has a thread such as this and I'm surprised there isn't one such as this here. Visitors and members would post with whatever topic or event occurred to them and others would chime in their 2 cents worth and their events. It doesn't necessarily have to be about woodworking - hence the location in Off-Topic. It could be about plumbing, a car, a DIY house issue, going for an operation anything really. It gives members an opportunity to "experience" the lives of others in a casual thread. For example: Today, I'm going to find how to get gross to net cyprus and learn more about how to get a job in Cyprus because I recently just moved here and I am doing all my best to feel myself here as a native person Pics to come If you find this of interest, feel free to add your "day" to the thread - if on the other the mods find this of no value, feel free to move or delete Today I am trying all my best to find new job place( currenty job is not good for my mental health so I am trying to change it 3 1 Quote
Popular Post gee-dub Posted December 16, 2025 Popular Post Report Posted December 16, 2025 Returning a favor by helping a friend out with his new shed. He lives in the high desert and so has to deal with things like protected Joshua Trees and the like. They have to appear on plan and be within proximity limits of the structure. The rear of the shed is designed to accept his riding mower; I'll help him build the ramp later on. We are currently priming and painting the drywalled interior. 2x6 insulated walls, R-30 ceiling and insulated doors and double pane windows. All this because where he is things get hotter than where we are down the hill (and we hit triple digits for weeks during summer) and he gets snow (we do not). 8 Quote
Popular Post wtnhighlander Posted December 17, 2025 Popular Post Report Posted December 17, 2025 Really nice looking shed! Given the "high desert" landscape, a riding mower seems optimistic, though... 1 2 Quote
gee-dub Posted December 17, 2025 Report Posted December 17, 2025 On 12/16/2025 at 4:14 PM, wtnhighlander said: Really nice looking shed! Given the "high desert" landscape, a riding mower seems optimistic, though... He bought the mower used and rebuilt it. It now looks nearly brand new. I think he just wanted something to do. 1 1 Quote
Mark J Posted December 17, 2025 Report Posted December 17, 2025 Is the shed going to be a hobby space, or just storage? Quote
legenddc Posted December 17, 2025 Report Posted December 17, 2025 That's one heck of a shed. Came out of the shop on Monday and noticed water on the floor. Seems our water heater pressure relief valve went off. Had to move a ton of stuff in the basement around. I lowered the temperature and that seems to have stopped it from going off. Just approved an estimate from a plumber to replace it. No idea how old our current water heater is. It was here in June of 2012 when we bought the place. New Dewalt planer came Monday as well. I got to use it some yesterday and it's so much nicer than my old Ridgid. Still loud but definitely more well built and leaves a much nicer surface on the wood. 1 Quote
Tom King Posted December 17, 2025 Report Posted December 17, 2025 No way should that be called a "shed". I wouldn't help anyone paint for less than $150 an hour. Quote
Popular Post gee-dub Posted December 17, 2025 Popular Post Report Posted December 17, 2025 On 12/17/2025 at 5:00 AM, Mark J said: Is the shed going to be a hobby space, or just storage? He will have a general purpose work bench in there. He will move all his hardware, seasonal storage, and so forth out there. This will leave his garage for primarily vehicle in-and-out. 3 Quote
Popular Post Ron Swanson Jr. Posted December 20, 2025 Popular Post Report Posted December 20, 2025 What did I do today? In my infinite wisdom, I chose today to tackle the bulk of my Xmas shopping. I'm now signing up for trauma therapy. 3 3 Quote
Popular Post Jfitz Posted December 21, 2025 Popular Post Report Posted December 21, 2025 I'm still waiting for Brown Santa (i.e. UPS) to make some deliveries, but I actually went out to real stores and picked up a few small items on my list. I know the list was right, because I checked it twice I also replaced the drive belt on my bandsaw because it was delivered a day earlier than expected. Looking forward to getting back to some shop time tomorrow. 4 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.