Popular Post Mark J Posted November 12, 2018 Popular Post Report Posted November 12, 2018 I finished this last week, but didn't get to take any pictures until this weekend. This is my second Three Sided Bowl design and I am really taken with this form, so there will be more. I showed the first one back in the spring. This one has a thinner and more delicate bottom section and the bottom curve of the basin echos the curve of the oval window. It's hard maple and I used a gel varnish for the finish instead of my usual go to of mineral oil and wax. I don't personally care for a very glossy finish, but the wax was always a bit dull and I like this satin sheen. Over all size is 6 x 6 x 4. 6 Quote
Kurt Triebe Posted November 12, 2018 Report Posted November 12, 2018 Uhhhhh... WOW. That’s awesome, I’d love to see a video on how this is turned! 1 Quote
pkinneb Posted November 13, 2018 Report Posted November 13, 2018 Ok this is simply awesome!! The next time you do one I expect to see a few progress pics and some tips 1 Quote
Popular Post Mark J Posted January 7, 2019 Author Popular Post Report Posted January 7, 2019 So a few people have asked for more detail on how I made this and the other "three sided bowls". In response to similar requests from the folks in my local wood turning club I ended up making the following slide show on how I made this bowl. I figured out how to get the slide show posted, so for those that are interested read on, but I have to caution you that it is a very long post. (In fact, I hope it doesn't crash the server). HOW I TURN A THREE SIDED BOWL A wise woodworker once told me “Without a strategy it’s going to take longer” (Which, I will add, presumes that without a strategy it’s going to work at all). This is how I make a three sided bowl. You might do it differently I keep trying to simplify the process. Why do I call it a three sided bowl? Graceful inside or basin, a shapely outside, and then hollowed ‘outside-in’ part. Could just call it a suspended basin form, but then a flying buttress would be an external arch support. A few caveats There is a lot of planning and preparation for each project I am only going to touch on this This is dry wood. All of the design is in the shape, so I want a dimensionally stable blank Wood selection The shape is complex so I want clear simple grain in a light wood Plain maple preferable to ambrosia Designs need height so 16/4 board 16/4 is the thickest I can cut for now Available block size informs design and design informs needed block size Usually start with a sketch based on typically available block sizes This is 16/4 maple ready to be cut into rough blanks To end up with a balanced piece requires starting with a truly square block 6 flat, smooth and perpendicular sides. Now that’s square I need accurate full size drawings to use as a guide during the turning. Not everyone’s thing, but it’s how I do it Actual dimensions are taken directly from the block Refine the rough design shape in view of the actual size. Last chance to make sure the design is possible. Do I have the correct size chuck jaws for the mounts I am planning? Is the basin deep enough for the woodworm screw or can I use a tenon? Will the wings or pillars be too thin and fragile? Can I get the tools through the opening to do the hollowing? Six full size drawings 90 and 45 degree en face 90 and 45 degree cross section 90 and 45 degree top down 45 degree cross section and 90 degree en face are the most important All play some role in my understanding and execution of the piece Include detail such as Forstner bit and guide holes Really big graph paper helps Next I mark up the block to reflect the diagrams Find the centers of both faces as accurately as I can Mark any relevant dimensions Size of mortise, size of Forstner, location of guide holes, etc. Copy the 90 degree en face view to each of the four faces The 90 degree view transferred to the block with carbon paper Then drill the guide holes into the bottom Accurate depth, about ¼” less than final dimension Gives guidance for hollowing out 1/8” bit Drill for center of the top surface (for woodworm screw or cone center) Drill point counter sink bit very stiff and stays on target Starts hole for a 1/8” bit Creates seat for a cone center Starts hole for 5/16” bit (for woodworm screw) A 1/8 – 5/16 inch “drill point counter sink bit” (McMaster Carr) Using 30 degree jig I drill the guide pin tracts Drill point counter sink does a great job starting hole on angled surface 1/8” bit completes hole for guide pin Ready to turn. Turn a tenon on the top face or use a woodworm screw Make a “moat” with 90 degree detailer Diamond detailer to form tenon Flip block and mount tenon to chuck Tailstock if you can Remove some of corners by cutting into the long grain side Rounding without a pounding Surface marking is a guide as to how far is “some” Leave some margin for error Remember the difference between a pot and a bowl Now a few words about tool grip I don’t The hollowing jig does it all Articulated arm type best for this kind of hollowing Fixes tool at zero altitude with zero pitch and zero roll. I can’t do better than that Finger tip control Great lighting opportunity Simple Hollowing System from Harrison Specialties Mounting to bed is versatile, great range, keeps tailstock available Only system with standard carbide scraper tools available (Hunter style cupped cutters are not scrapers) Look Ma, no hands! Articulated arm mounted on home made stand off I take outside to 1/8” or 1/16” of final surface Oval mark up is what’s left Next hollowing out Forstner bit Glue in guide pins Start the laborious job of excavating the base Which takes forever and 6 days Mind the guide holes and pins Forstner bit Advanced technology internal guidance system: bamboo skewers colored with Sharpie. Spinning pins easily visible, like runway lights they guide my tool path Working laterally toward the guide pins. Guide holes visible. Guide pins visible Notice the stepped ring cut into the bottom of the bowl. This is the secret disappearing mortise mount. It also limits the access for hollowing out I’m working through a small opening, so visibility is a challenge. Rotating the head stock helps a great deal in providing access and a better view… …but sometimes you just have to get down with what you’re turning. (yes I forgot to remove my wrist watch). Eureka! A break through. Once I’ve cut through I can actually see the tool so I don’t need the guide pins anymore And now the hollowing system allows for versatile new tool holds with finger tip control. Working through the access hole with tool and tool rest. There will be end grain tear out along the trailing edges of two of the pillars Chamfering the edges proactively helps, but tear out is still a problem. With work on the inside about done… …it’s time to finish off the outside. The oval is finalized With the oval window shape finalized I shape the bottom of the basin to match. Shaping the bottom of the basin First sanding Motor can’t be used for most of it Still the best time for access to recesses Outside surface and most of the hollow out surfaces are sanded grit by grit from P60 to P220 Skip the secret disappearing mortise area A way lot of sanding… …and sanding… …and sanding. Re-mount the bowl on the secret disappearing mortise and carve the basin The secret mortise mount Sand the basin P60 to P220 Overlapping the border With each successive grit advance the border Complete the sanding of the basin and sides to P600. Re-mount to turn off the mortise What do you call a Longworth with a donut: A Long John Removing the secret mortise ring The mortise is just shavings and the secret is secure Final sanding Sand the newly shaped surfaces Extend the border with each grit until P220 Sand the entire hollowed section to P600 Thank You! 5 2 Quote
pkinneb Posted January 8, 2019 Report Posted January 8, 2019 2 hours ago, RichardA said: Damn! LOL that's exactly what I thought Richard 1 Quote
Popular Post Chestnut Posted January 8, 2019 Popular Post Report Posted January 8, 2019 Some times when you learn how something is done it clicks and you have that Ah HA moment and it all makes sense. That didn't happen here this is still just magic to me. 2 1 Quote
Mick S Posted January 8, 2019 Report Posted January 8, 2019 That really is a great project - lots of techniques to learn, lots of setups to consider and really, really well executed! Thanks for the lesson! Quote
wouldwurker Posted January 16, 2019 Report Posted January 16, 2019 I love that your lathe looks like the International Space Station Ditto to Chesnut’s remark. I actually know less now that I know how you did it! Amazing work man. 1 Quote
Byrdie Posted January 16, 2019 Report Posted January 16, 2019 Showed the post with the finished bowl and then this one to a turner I work with. After several, "Wow!"s and, "Amazing!"s he wrote down the URL of the forum. Told me the next day that he came back to take a closer look. I don't know if he has or will join but I believe he's thinking about it. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.