Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Garrett Wade Bench?

Featured Replies

Quick question....   so i'm not a super serious woodworker (less so once we had our kid a few years back)... but I've never had a workbench and would love to have one. I've had plans collected away for years of one I always planned on making... but life gets in the way and at this point I would rather pay the piper and just purchase one. I am just using my my grandfathers wooden kitchen table for projects ... but that only goes so far!

So I am seeing a Garrett Wade bench, made with "african hardwood" that is going for $1200.... and I offered $600.. which they are okay with. 5’x 21” top with two 7 ½-inch vices. It's in very good condition from the photos. 

Before I make a few hour drive to look at it.... has anyone have any experience with this brand and if the $600 is reasonable?

Screen Shot 2019-05-03 at 2.23.19 PM.jpg

I've no experience with that specific brand or style of bench but from the pic it looks pretty nice.  If you can lean on the end and not get too much wobble from it in the long direction I think it'd be worth a go.  Certainly looks stable enough and to have a good weight.  I can see a little wear but whoever used it took pretty good care of it.

22 minutes ago, Byrdie said:

I've no experience with that specific brand or style of bench but from the pic it looks pretty nice.  If you can lean on the end and not get too much wobble from it in the long direction I think it'd be worth a go.  Certainly looks stable enough and to have a good weight.  I can see a little wear but whoever used it took pretty good care of it.

All of what Byrdie said - 

Plus the design looks like, if you were so inclined, that you good build a beefier base for it sometime down the road and put the top from this on on that base.  There is probably way more lumber in that bench then what you could buy for $600.  I think unless you find something really wonky about it when you get there, I would go for it.

1 minute ago, Chet said:

... There is probably way more lumber in that bench then what you could buy for $600....

That was my first thought as well.

  • Author

Looks like the Garret Wade benches aren't sold anymore... not much info... but thank goodness the internet doesn't forget. I am finding an old 1997 Tool Buyers guide that lists it with the below info.

Large Cabinet Price   20.5 x 60 x 34.75  Rhodesian Teak   180lbs .... but only $525!  

I'll have to go back to them with maybe $350-450

e276f30959d15c4cb3edeba674643e12--workbe

That looks pretty good, except for that base, which I believe will rack. But as already mentioned, you can build a better base down the road. Seems like a good start to me.

  • Popular Post
20 minutes ago, Nevermore said:

180lbs .... but only $525!  

$525 is way different now then it was 22 years ago.  Like I said you couldn't come close to buying materials for the $600 you offered.

Lie Nielsen sells this one for $2500 plus shipping.

https://www.lie-nielsen.com/product/workbenches/lie-nielsen-workbench?node=4113

 

2 hours ago, Nevermore said:

...at this point I would rather pay the piper and just purchase one.

 

Can you find a better one for $600? If not and it checks out in person just buy it. $525 in 1996 is the same as $840 in 2018 dollars in my internet calculator is correct.

Give it the push test first. The base looks a little sub par for most woodworking benches. I would recommend a bench that has more beef in the legs and cross members. Looking at the pictures you posted, even if there is some some slop, there are ways to stiffen the bench. $350 max would be my offer.

Buy it. You could easily beef up the base by adding a 4/4 x 6 inch or wider stretcher on the rear legs. Cut a small shoulder to create a tenon, then pocket mortices and use barrel nuts and bolts to fasten it I. Won't take more than an hour or so, but you will be surprised at how much it stiffens the base against racking.

  • 7 years later...

Hi. I am waking up an old thread. I've been offered this bench for a used price of 975 and am going to see it. Other than the information below, does anyone have experience with this bench? 

It hits most of the marks that I've been looking for. Yeah, I know I should build mine. But I want one nice piece of furniture in the shop for inspiration until I do!

Price out a new workbench to give you some idea.  Try Rockler.com.  I don't remember if Woodcraft sells benches, but try them, too.

  • Popular Post

Unless you stumble upon cheap/free wood and vises you probably wouldn't save much, if anything, building a bench. Seems like a reasonable deal.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Who's Online (See full list)

  • There are no registered users currently online

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.