Popular Post treeslayer Posted April 24 Popular Post Report Share Posted April 24 Customer asked for a drop box for inside their business so people could drop off checks and correspondence thru a slot in the top and it had to lock so I came up with this, cherry with some walnut, didn’t want you folks to think I was sitting down on my brain and not in the shop, thanks for looking 10 Quote Link to comment Share on other sites More sharing options...
Coop Posted April 24 Report Share Posted April 24 That is darn cool Dave! I sure like how you did the door! 1 Quote Link to comment Share on other sites More sharing options...
wtnhighlander Posted April 25 Report Share Posted April 25 Pretty sweet design, Dave! 1 Quote Link to comment Share on other sites More sharing options...
Mark J Posted April 25 Report Share Posted April 25 Was the basket weave difficult? Quote Link to comment Share on other sites More sharing options...
Popular Post treeslayer Posted April 25 Author Popular Post Report Share Posted April 25 On 4/25/2024 at 6:01 AM, Mark J said: Was the basket weave difficult? A little trial and error but not too bad, those strips are 1/16” X 5/8”, and are bent dry, no steaming, this is the doors on a cabinet I made a while back, strips are 1/8” X 3/4” , those doors are probably 14 X 20 inches, oak and walnut. 7 Quote Link to comment Share on other sites More sharing options...
Ronn W Posted April 25 Report Share Posted April 25 Wonderful solution fo the client! As usual. 1 Quote Link to comment Share on other sites More sharing options...
Chet Posted April 25 Report Share Posted April 25 Dave do you have any pictures of how you mount the weave in the door frames? Quote Link to comment Share on other sites More sharing options...
gee-dub Posted April 25 Report Share Posted April 25 Just plain awesome Dave. Love the woven front panel. I am a big fan of using sapwood as a design element so kudos on that as well. 1 Quote Link to comment Share on other sites More sharing options...
Popular Post treeslayer Posted April 25 Author Popular Post Report Share Posted April 25 51 minutes ago, Chet said: Dave do you have any pictures of how you mount the weave in the door frames? Basic frame and panel Chet with a groove cut slightly wider than the strips and 3/8” deep, glue the ends and one side and weave the strips in, then glue the other side and clamp, here’s a picture of my test piece 3 4 Quote Link to comment Share on other sites More sharing options...
pkinneb Posted April 25 Report Share Posted April 25 Thanks for sharing I was wondering how you did that as well, very cool!! 1 Quote Link to comment Share on other sites More sharing options...
Chestnut Posted April 29 Report Share Posted April 29 Ooohh wow i love it! 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.