Ron Swanson Jr. Posted September 29 Report Posted September 29 Looks awesome man. Congratulations for completing the marathon and doing it well! Enjoy your new bench!! 1 Quote
Mark J Posted September 29 Report Posted September 29 So.... whatcha gonna make first with your new bench? 2 Quote
Von Posted September 29 Author Report Posted September 29 3 hours ago, Mark J said: So.... whatcha gonna make first with your new bench? Stay tuned. It will be made from some scrap from the bench. I started it a couple of weeks ago and it's got back-burnered. Looking at my schedule, I'll probably finish it next week. 2 Quote
pkinneb Posted September 29 Report Posted September 29 Awesome bench!! Thanks for taking us along. I'm sure you will get years of use out of it. 1 Quote
roughsawn Posted September 29 Report Posted September 29 Congrats Von! Great job working with your own lumber. Lots of pride in that. 1 Quote
Popular Post Von Posted October 11 Author Popular Post Report Posted October 11 I know I said I wrapped this up this journal, but is a workbench ever really finished? :-) Finally got back out in the shop and drilled dog holes in line with the tail vise. I did some reckoning to space them so each picked up where the previous one left off in terms of capacity. The third one ended up in a decent spot just inboard of the left bench leg and provides clamping capacity slightly over 5'. Action shot sanding a ~3' length of picture frame. The third hole has a mate towards the center for a planing stop for when I don't want to clamp something. I did my best to get it perpendicular to the center stop since a right angle seems like it could be useful down the road. One tip: I find my drill guide can be tippy when used near the edges of surface with the drill attached, but it can be hard to clamp down at times. It dawned on me to drill a couple of holes in a piece of scrap and slide that over the fence rods. That gave me lots of clamping surface and stabilized it nicely. 6 Quote
Popular Post Von Posted October 14 Author Popular Post Report Posted October 14 First project on the new bench complete. I don't think I've made shop art before but I decided a photo of the log from which the bench came merited a place in the shop. The frame is scrap from the bench. 6 Quote
wtnhighlander Posted October 15 Report Posted October 15 Like hanging baby pictures of the kids! Cool idea! 2 Quote
Popular Post Von Posted October 18 Author Popular Post Report Posted October 18 I was over in Illinois for the weekend and picked up these hold downs. They unfortunately are not getting a grip in the new bench - they just pull straight out of the bench when I tighten them. They work fine in my old thinner bench (~1.5" vs ~4") so I assume it's a angle issue. A couple options I've heard about are hogging out the bottom of my dog holes to effectively make the bench thinner or putting a slight bend in the hold downs. The latter seems easier. Any other suggestions? TIA. 4 Quote
Ron Swanson Jr. Posted October 18 Report Posted October 18 On 10/18/2026 at 6:03 PM, Von said: A couple options I've heard about are hogging out the bottom of my dog holes to effectively make the bench thinner or putting a slight bend in the hold downs. The latter seems easier. Any other suggestions? TIA. I've heard that too- that sometimes a slab can get too thick for a lot of hold downs, so boring the bottom of the holes is the solution. Seems like a drastic step though. I think you're in the right track trying to give them a little bend. Or, you could try a different style hold down and hope for the best, as unthrilling as that might be, having just paid for these ones. I can attest that the veritas hold down works really well and has a really long post on it, along with a really big price tag to go with it. 1 Quote
Von Posted October 19 Author Report Posted October 19 14 minutes ago, Ron Swanson Jr. said: I can attest that the veritas hold down works really well and has a really long post on it, along with a really big price tag to go with it. Yep, I have one as well and it works fine on the new bench. I think it applies force at more of an angle because of its hinged approach. 1 Quote
wtnhighlander Posted October 19 Report Posted October 19 Another option is to file grooves around the shank to add grip. Like threads on a screw. 1 Quote
Mark J Posted October 19 Report Posted October 19 Those are Sjoberg hold downs, and I know their workbench tops are thinner than yours. So maybe that is the issue. I wonder if the hold down would work better if you gave it a light tap to seat the stem before tightening the screw? Maybe just pressing down on the stem would be enough to get the serrations on the stem to hold? 1 Quote
Immortan D Posted October 19 Report Posted October 19 The LN holdfast can handle up to 4" thick according to their site. 2 Quote
Popular Post gee-dub Posted October 19 Popular Post Report Posted October 19 A day late and a dollar short but . . . . Cheap Harbor Freight clamp fabrication. 4 Quote
Popular Post Von Posted October 26 Author Popular Post Report Posted October 26 I fixed my bench rocking. I figured out I needed a shim just slightly over 1/8" which I made by resawing some decent quality plywood and sanding it to final thickness. I used plywood as I wanted something that hopefully won't split along the grain with the lateral forces. Kudos to this Fastcap Upper Hand. No one is going to mistake it for a pneumatic jack, but it will lift one end of my workbench high enough for me to get some blocking under it. Downside: it has no soft release, so if I was going to do this with any frequency, I would figure out a way to bring the bench down softly. I epoxied the shim to the bottom of the leg. I put some cardboard under it to help get even pressure and keep epoxy off the floor. For some reason, I think the extra height from the cardboard, I couldn't get my casters to release so with the epoxy drying, I used wedges to get pressure on the bottom of the shim. One lesson here: wrap the cardboard in packing tape so you don't glue it to your shim and have to scrape it off. After picture. Works as desired - no more rocking. I'll report back if it fails to hold up. Unrelated: I'm using the front row of dog holes and my Veritas hold down frequently, which was not part of my plan but is turning out to be a good combination. The hold down lives on my benchtop and is handier for many things than walking all the way across the shop for a clamp. 3 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.