Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

What's On Your Christmas Wish List?

Featured Replies

  • Popular Post

I would sure want these on my list for when people ask "what do you want for Christmas?".  I have a of cool things I would not buy for myself.  This is how I got them ;).  I'll add some here and come bck and add more.  Add yours.  Others will thank you.

Veritas Apron Plane.  Probably my most used plane.

Grr-Ripper Push Block and Accessories.  I got a couple of these on clearance after Xmas at Lowes.

Veritas Dominoe Joinery Table.  What a time saver.

Miniature scrapers.  Great for glue squeeze out clean up and so much more.

 

The apron plane is on my wish list this year! I got the domino joinery table last year. I’ve only used it a couple times but it sure is handy when you have a job for it!

  • Popular Post

Things I want but will be a while before I buy for myself...

  • A router lift
  • A Domino
  • A really good sander/dust extractor combo
  • A nice shop apron (whose pockets don't constantly fill with saw dust and screws I drop)
  • Popular Post
On 12/5/2024 at 9:46 PM, Von said:

Things I want but will be a while before I buy for myself...

  • A really good sander/dust extractor combo
  • A nice shop apron (whose pockets don't constantly fill with saw dust and screws I drop)

These are also on my list.

I've strongly hinted at the following:

  • More clamps that are 40" or longer
  • Router table fence
  • Amana countersink bit
  • Setup blocks - fine with cheap ones
  • Nice set of ball-end hex keys

Non-shop related I really like Darn Tough socks. Always open to receiving more and have given a few pair to my parents and in-laws. They're expensive but have held up so far and have a lifetime warranty if they do get holes.

  • Popular Post

I've been swapping one battery between my drill and impact driver for a longer time than i want to admit. And to put it bluntly, IT SUCKS. 

So even though it's the most boring gift on the planet, THAT is what i want, and am 99% my wife got me. 

On 12/5/2024 at 8:46 PM, Von said:

 

  • A nice shop apron (whose pockets don't constantly fill with saw dust and screws I drop)

And i thought i was the only one!!

  • Author
On 12/6/2024 at 1:32 PM, Ron Swanson Jr. said:

I've been swapping one battery between my drill and impact driver for a longer time than i want to admit. And to put it bluntly, IT SUCKS. 

So even though it's the most boring gift on the planet, THAT is what i want, and am 99% my wife got me. 

If it makes your time in the shop more enjoyable and more productive, it is never, never boring. :-)

 

I have a large collection of silly little tools, accessories, and jigs that are not the most exciting topics for discussion, but, I would not want to be without them.

On 12/6/2024 at 4:32 PM, Ron Swanson Jr. said:

I've been swapping one battery between my drill and impact driver for a longer time than i want to admit. And to put it bluntly, IT SUCKS. 

So even though it's the most boring gift on the planet, THAT is what i want, and am 99% my wife got me. 

What brand and voltage do you have?

On 12/6/2024 at 9:34 AM, legenddc said:

These are also on my list.

I've strongly hinted at the following:

  • More clamps that are 40" or longer
  • Router table fence
  • Amana countersink bit
  • Setup blocks - fine with cheap ones
  • Nice set of ball-end hex keys

Non-shop related I really like Darn Tough socks. Always open to receiving more and have given a few pair to my parents and in-laws. They're expensive but have held up so far and have a lifetime warranty if they do get holes.

Which Amana bit or set are you wishing for and no, I’m not getting you one for Christmas!:D

My bits are less than desirable and I have no idea what to tell the kids I want and this would fill the niche. 

On 12/6/2024 at 8:05 PM, Coop said:

Which Amana bit or set are you wishing for and no, I’m not getting you one for Christmas!:D

My bits are less than desirable and I have no idea what to tell the kids I want and this would fill the niche. 

There are two types of Amana bits, so be careful which one you get. One has a tapered bit and the other a straight bit. The bit on the tapered one isn't depth adjustable. The shortest it goes is about 1½" long. 

On 12/6/2024 at 9:05 PM, Coop said:

Which Amana bit or set are you wishing for and no, I’m not getting you one for Christmas!:D

My bits are less than desirable and I have no idea what to tell the kids I want and this would fill the niche. 

I think this is for #8 screws. https://www.amazon.com/gp/product/B00ECCNDBA/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1

On 12/7/2024 at 7:52 AM, legenddc said:

I got the 1/8" version, then I bought a couple of long 1/8" drill bits from McMaster-Carr.  I cut one down, and now I can drill pilot holes for long deck screws.

  • Author
  • Popular Post
On 12/6/2024 at 1:34 PM, Ron Swanson Jr. said:

And i thought i was the only one!!

I tried one of the mesh-bottom pocket aprons; it clogged more than worked as described.  I tried one of the velcro bottom pocket versions.  Not bad till the velcro started to fail due to getting clogged up with debris.  I am not saying I have ended my journey but am currently using a cheap "Husky" waist apron with good results.  I do dump the pockets now and again but there aren't that many so it is not much effort.

That's the one I just got, and love it. I had my wife hem up the bottom so it doesn't hang down so far.

Thanks all - the angled pockets I'm seeing on what is being shared look promising for keeping out dust and small objects (I've spent a lot of time looking for small parts on my floor only to find them in an apron pocket). I have pockets that have open tops and mesh bottoms currently (a no-longer-sold Rockler apron) and, as gee-dub shared, they quickly clog.

Of all the things on my list, this one is certainly the most affordable, so I think you have identified my present for myself :-)

  • Popular Post

Here's my load-out

Shop towel in right hand metal loop for wiping off glue
Ratchet screwdriver in left hand cloth loop (screw driver bits stored in handle)
6" combination square in right big pocket
Magnet in lower small vertical pocket
Mechanical pencil, carpenters pencil, pen, Sharpie, center punch, and marking knife in upper small vertical pockets
10' tape measure clipped to upper cloth loop

I put the magnet on the end of the tape measure to pick up screws and stuff

This leaves the left flap pocket and the two slash pockets free for whatever

 

  • Popular Post

It's ironic. We can engineer a table saw that drops the blade in a zillionth of a second on contact with your skin, but a decent apron remains unattainable. 

I have an apron with flaps over the pockets. They are still easy to get into but don’t fill up with sawdust.
 

edit: it’s similar to the ones posted by Beechwood. 

  • Popular Post

Time. It's the only thing I want, and no one can buy it for me.

  • Popular Post
On 12/9/2024 at 10:01 AM, Chestnut said:

Time. It's the only thing I want, and no one can buy it for me.

That's a fact!  Fyi the older you get the faster it seems to go :o

  • Popular Post

That's the one thing I need too!

A long time ago an old man told me that he'd gotten old enough that Christmas came twice a year.  I thought at the time that he was just a crazy old man.  Now what he said seems a lot wiser than crazy.

When I was building houses, the last thing I did every day before taking off my tool belt was to blow out the pockets with the air hose.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.