gee-dub Posted August 31, 2025 Report Posted August 31, 2025 So appreciating the detailed journal. I really enjoy learning how others do things, their methods, and their approach to operations. 1 Quote
Popular Post h3nry Posted September 1, 2025 Author Popular Post Report Posted September 1, 2025 Fitting the doors ... first trim down the through tenons, and plane the edges smooth. Then add the piano hinges ... a little bit if extra planing needed to get the doors to close next to each other ... unfortunately it looks like the right door frame didn't come out of the clamps quite flat ... there's a bit of an ugly gap where the doors overlap. I'm not quite sure how to fix this, or if it is indeed the door and not the case that isn't properly square ... for the moment I'll get on with the top while I ponder this ... 4 Quote
Von Posted September 1, 2025 Report Posted September 1, 2025 On 8/31/2025 at 8:09 PM, h3nry said: unfortunately it looks like the right door frame didn't come out of the clamps quite flat ... there's a bit of an ugly gap where the doors overlap. I'm not quite sure how to fix this, or if it is indeed the door and not the case that isn't properly square ... for the moment I'll get on with the top while I ponder this ... First, wow - it looks amazing! Sorry about the door frame. My respect for the art of the glue up is growing. Very loose brainstorming: clamp the door flat and add some bracing, which will be under tension, to try and spring it flat? Quote
gee-dub Posted September 1, 2025 Report Posted September 1, 2025 I developed the habit of clamping frame parts to a known flat surface during glue up. As you mention, if my carcass is a bit out of square I can still have problems. The piece is coming along beautifully. I too do "something else" when I need to percolate on a solution to an unexpected issue. Sometimes the answer comes to me over coffee or in the shower the next day 2 Quote
Popular Post h3nry Posted September 1, 2025 Author Popular Post Report Posted September 1, 2025 I put the moulding profile on the top, and the opposite profile on the flaps. Then routed the mortices for the hinges. I still need to trim the flaps to length, and I might trim about 3/4" off the back. and all unfolded ... I have to start thinking soon about how the shelving on the inside of the doors is going to work. 3 Quote
fcschoenthal Posted September 1, 2025 Report Posted September 1, 2025 On 9/1/2025 at 4:52 PM, h3nry said: I have to start thinking soon about how the shelving on the inside of the doors is going to work. It would be a shame to cover up the burl veneer with shelves, but I'm sure that it's more than a request. Quote
wtnhighlander Posted September 1, 2025 Report Posted September 1, 2025 That is some impressively clean hinge mortising! How did you center the screw holes? 2 Quote
fcschoenthal Posted September 2, 2025 Report Posted September 2, 2025 On 9/1/2025 at 6:56 PM, wtnhighlander said: That is some impressively clean hinge mortising! With his carving skills, he probably just went around it with a pocket knife, then cleaned the bottom with the router plane. 2 Quote
Popular Post h3nry Posted September 3, 2025 Author Popular Post Report Posted September 3, 2025 On 9/1/2025 at 5:56 PM, wtnhighlander said: That is some impressively clean hinge mortising! How did you center the screw holes? I just traced the holes in the hinges with a sharp pencil, then eyeballed the centre and jabbed an awl in to make a hole to guide the drill ... mortices made by chopping the edges with a chisel and curved gouge, then to depth with the router plane. today ... just trimmed the top flaps to close properly. Since the cut is all endgrain, it was slow planing to get them down to the lines. 5 Quote
Popular Post h3nry Posted September 8, 2025 Author Popular Post Report Posted September 8, 2025 The problem with the door is definitely that the right door frame isn't flat. There doesn't seem to be any easy way to fix it ... and I'm not rebuilding it. So at the moment I'm thinking that I'll just be adding a wedge to fill the gap, and leaving it off ... but that's not ideal, so still thinking. In the mean time I've cut up a bunch of wood for the shelving, and been playing with some ideas 5 Quote
Mark J Posted September 9, 2025 Report Posted September 9, 2025 That's very vexing, particularly as careful as you are. Looking back at the picture in your Aug 31 post I'm wondering if it might be possible to shim out the door's hinge? But then the top might not lay flat when opened? Just thinking "outloud". 1 Quote
Popular Post h3nry Posted September 11, 2025 Author Popular Post Report Posted September 11, 2025 On 9/9/2025 at 7:20 AM, Mark J said: That's very vexing, particularly as careful as you are. Looking back at the picture in your Aug 31 post I'm wondering if it might be possible to shim out the door's hinge? But then the top might not lay flat when opened? Just thinking "outloud". I have pondered on this too ... but at the moment the hinge is vertical, and the door swings nicely ... shimming the hinge will affect the door swing. 3 Quote
Popular Post h3nry Posted September 11, 2025 Author Popular Post Report Posted September 11, 2025 I have an idea of how I want the shelves to lay out ... but I'm kind of working out the joinery on the fly ... The vertical walls need to be notched at the base to go over the frame. These walls will glue onto the side of the door frame, and not onto the panel. The shelves will be held be stopped dadoes. Since these are so small, I just used the small router plane to cut them out. The shelf across the top of the left door needs a notch to pass the frame in the middle. The tops of the verticals need a bit of shape so that they can fold underneath the moulding below the drawers. And that makes the top and bottom shelf. Because the shelf has to change width part way along to accomodate the side drawers, there needs to be a middle vertical too at the width change. The middle vertical has to be joined so that it can cross the upper and lower shelves And finally the intermediate shelves can be added. That gives the layout of the shelves ... they still need little lips at the front to stop things falling off when the doors are opened/closed. And then I need to do something to try and make them pretty. 6 Quote
Popular Post h3nry Posted September 14, 2025 Author Popular Post Report Posted September 14, 2025 Working on the lips for the shelves. first cut a strip to size ... I need 100 inches. Then plough a groove to make an inset area in the middle, and finally cut a lattice pattern for decoration. The top "rail" rounded over, cut to length and sanded. and propped in place ... now they need to be installed properly. 6 Quote
Coop Posted September 14, 2025 Report Posted September 14, 2025 I’m in awe! I’ll sit back and watch in amazement at the details and craftsmanship. 1 Quote
Von Posted September 14, 2025 Report Posted September 14, 2025 On 9/13/2025 at 8:04 PM, h3nry said: first cut a strip to size ... I need 100 inches. Then plough a groove to make an inset area in the middle, and finally cut a lattice pattern for decoration. Would you please say a little more on how you cut the lattice? I see what looks like a mortising chisel in the photo. I would be anxious about breaking the strip. TIA. Quote
Popular Post h3nry Posted September 14, 2025 Author Popular Post Report Posted September 14, 2025 On 9/14/2025 at 6:21 AM, Von said: Would you please say a little more on how you cut the lattice? I see what looks like a mortising chisel in the photo. I would be anxious about breaking the strip. TIA. It:s a 1/4 bench chisel ... freshly sharpened ... I just pushed it in by hand along the cross-grain pencil lines (not or only very lightly on the long grain edge, for fear of splitting the wood). Then once the triangle was scored like that, I pried out the triangular bit of waste by pushing against the edge of the triangle adjacent to the uncut lattice. It does leave some bruise marks on the wood from the prying action, but it's very small in a fine detail that will be almost invisible. Because the wood is only about 1/8 thick, it only took 3 or 4 rounds prying out the waste to go through, when the last one can be pushed out from the back. The insides of the triangles are a bit rough, I made a quick attempt to smooth them with a small flat file, but they're definitely not sanded to 220. I'm hoping the small scale will allow a bit of roughness and irregularity to go unnoticed without sacrificing the effect I want. 3 1 Quote
Mark J Posted September 15, 2025 Report Posted September 15, 2025 20 hours ago, h3nry said: , I made a quick attempt to smooth them with a small flat file, but they're definitely not sanded to 220. Maybe a job for a small triangular file or rifflers? 1 Quote
Ron Swanson Jr. Posted September 15, 2025 Report Posted September 15, 2025 On 9/15/2025 at 7:52 AM, Mark J said: Maybe a job for a small triangular file or rifflers? I'd be tempted to make a sanding block about 6" long and in the shape of those triangles, with paper on each face. 2 Quote
h3nry Posted September 15, 2025 Author Report Posted September 15, 2025 On 9/15/2025 at 10:48 AM, Ron Swanson Jr. said: I'd be tempted to make a sanding block about 6" long and in the shape of those triangles, with paper on each face. I don't think I'm going to do it ... but I will acknowledge this is a good idea. 2 Quote
Popular Post h3nry Posted September 15, 2025 Author Popular Post Report Posted September 15, 2025 To install the fences, I planed the width of the fence off the front of the shelves, and glued on the fence. Most of the shelves were simple planing, but where the shelf width changes, it was one of the rare moments my bull-nosed plane came into use. I use my handscrews quite a lot for workholding ... but very rarely in glue ups ... but they turned out to be great for this job. Finally cut a little shape into the vertical supports. That's probably all I'm going to do with the shelves before gluing ... but I'll hold off that just yet while I do whatever I need to do to the doors 6 Quote
Popular Post Ron Swanson Jr. Posted September 16, 2025 Popular Post Report Posted September 16, 2025 It just gets more and more impressive, @h3nry. Thanks again for sharing your work. 4 Quote
Coop Posted September 16, 2025 Report Posted September 16, 2025 On 9/15/2025 at 7:51 PM, Ron Swanson Jr. said: It just gets more and more impressive, @h3nry. Thanks again for sharing your work. I agree! 1 Quote
Popular Post h3nry Posted September 17, 2025 Author Popular Post Report Posted September 17, 2025 Time to do something about the badly fitting door ... I created a long thin wedge and glued it onto the right door so that the gap is filled. certainly not ideal since the bottom of the two doors don't properly align ... but at least there is no big ugly gap. I also fitted the strike-plate for the lock that holds the doors closed. Metalwork is definitely not my strong point, nor do I really have the tools. The saw blade broke when I still had about 1/16 left to cut, but I managed to force it finished ... then cleaned up a bit with files ... it's not a very good cut, but it's located on the underside if the top, so not on show. 4 Quote
Popular Post h3nry Posted September 17, 2025 Author Popular Post Report Posted September 17, 2025 The shelves will glue onto the door frames, and not onto the panels ... so I thought it might be a good idea to prefinish the panels first, since they will be harder to finish once the shelves are in ... also any glue squeezeout should be easier to clean up without leaving nasty stains. I'm definitely liking the colour that is coming out of the veneer. I'm using Minwax satin wipe on poly for the finish. 6 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.