Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

3” x 21” Hand Held Belt Sander

Featured Replies

I don’t use mine that much but when I do, it comes in handy and today was one of those times. My Ridgid tore thru three belts today and they separated at the tape line where the two ends join. I’m going to bite the bullet and buy more belts as these have been on my shelf for a couple of years but if one of the new ones separates, I’m going to assume it my sander. If that’s the case, does anyone have a make and model of one you have success with? Corded is fine. 
Oh, and after the first belt broke, I made sure that I adhered to the direction indicated on the belt. 

  • Author

Ross, I suspect it to be the belts as well. 

I've been frustrated in the past by this and tried CA gluing them back together. Seems that when CA glue gets heated up, it releases. Luckily, I've got a couple of big box stores within 15 minutes of the house so I just pick up a couple of grits and have at it.

Now that you mention it, I have several spares on hand for the oscillating belt sander, too.  Maybe not such a wise purchase. 

On 2/11/2025 at 9:02 AM, Mark J said:

Now that you mention it, I have several spares on hand for the oscillating belt sander, too.  Maybe not such a wise purchase. 

I just looked to see what size my oscillating belt sander is and was going to offer some of them to Coop but it's 4" x 24". I suspect by the time I get around to using all of them they'll be dead.

Supposedly you can get some bias banding tape and fix them with that and CA glue. This article also mentions storing the belts in ziploc bags to preserve them. 

I have always maintained a 3 x 21 belt sander. I had a Rockler that sold to delta. One was made out of plastic Porter cable. and maybe other brands. they stopped allowing lube. Under the logo lifts off and add lube to the hole. It worked. Then they took that away. Then they shortened the cord to 5'. So dumb. I no longer use it. I like and use the 3x21 Makita. No access to lube a bearing also but overall the best I could find. 

I mostly use 3 x 21 from Klingspor. Cubic zirconium. Mostly i use 100g. If the Makita broke I'd buy another one.

I must live in a belt preservation zone or something. I have never had a belt fail at the glue line. Some of my belts were purchased over 15 years ago (there was a really good sale) and they're still fine. They are all Klingspor.

On 2/11/2025 at 10:25 AM, drzaius said:

I must live in a belt preservation zone or something. I have never had a belt fail at the glue line. Some of my belts were purchased over 15 years ago (there was a really good sale) and they're still fine. They are all Klingspor.

This has been my experience as well. Mine are from Klingspor also :)

Full disclosure mine are belts for a floor standing edge sender or tubes for a spindle sander all just stored in the cabinets below them. I got rid of my handheld belt sander years ago although they must be making a resurgence as I have seen them in several YouTube video's in the last month :)

+1 to those with the belt storage issue. I had a bunch of belts I bought (probably at a local big box store or hardware store on sale, certainly not Klingspor) for "some day" fail on the glue line after years sitting in a bin. Attempts to glue them back together were just frustrating. I ended up cutting them up to use for hand sanding.

 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,011 Total Members
  • 3,644 Most Online
  • bobtjanitor Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.