Coop Posted January 6 Report Posted January 6 @gee-dub, recently I’ve been going thru some various old woodworking mags and found two articles in Woodworker’s Journal, one in 2/2015 and one from 1/2016. Both were written by Chris Marshall and both were instructional articles on Greene and Greene builds. Where did you gain your knowledge on G & G pieces? 1 Quote
Popular Post gee-dub Posted January 6 Author Popular Post Report Posted January 6 @fcschoenthal - It is a lot like a stacking slot cutter as far as set up goes. The bit is supplied with an opposing set of cutters and an array of spacers in different thicknesses. Other cutters are available separately just like a slot cutting set. I have 1/8" and 3/16" round overs but others profiles and dimensions are available. The big advantage is that you can route "downhill" on complex shapes like cloud lifts and so forth doing one or both sides at a pass. @Coop - I fell in love with G&G in college. It probably helps that I grew up not too far from Pasadena where several of the "Ultimate Bungalows" are. I did my first serious G&G piece in the late 2000s. Darrell Peart used to belong to an old Yahoo-Group on G&G (remember those?). He was very generous with his time and knowledge and was the guy who made me actually think I could build this stuff. He also would attend the Craftsman Weekend events in Pasadena along with folks like David O. Wade and Tom Stangeland. All would bring fairly sizable collections of their work, present seminars, workshops, and the like. Just as we do here on the forum these craftsmen would share their knowledge, methods and tips. 7 Quote
Popular Post gee-dub Posted January 7 Author Popular Post Report Posted January 7 Laid the base color coat on these guys I'll get to the top today. I cobbled this ROS Table together back in 2014 out of an old TV cabinet I scrounged off the side of the road. I can't believe it is still holding together but I am glad it is. I ran a 60 grit belt when I shaped the pulls. I should have used an 80. There are some score marks that I am having trouble getting out so I will use the little ROS Table. Don't you love it when that stuff shows up after you have started finishing? I often use a mineral spirits wipe to check things but the pulls looked good until the finish hit. I got tired of squatting and kneeling on the floor to apply finish to the case work. I moved it up here. It will all be just finish application for a while so I will check back in when something noticeable happens. 6 Quote
Mark J Posted January 8 Report Posted January 8 20 hours ago, gee-dub said: cobbled this ROS Table together back in 2014 I think that's clever. I'm curious if you had a particular need for this arrangement when you invented it, or was this in lieu of a disk sander? Quote
Popular Post gee-dub Posted January 8 Author Popular Post Report Posted January 8 @Mark J - I think there is or was a commercial version of this. I needed something to random sand some small ebony parts for a G&G piece. Trying to hold small parts against a ROS is OK for a few items but I had dozens. It was made to get me through that set of cabinets. Then it just sort of hung around. 3 Quote
Popular Post gee-dub Posted January 8 Author Popular Post Report Posted January 8 Couldn't resist. I am really enjoying how the color is coming out in this decade old walnut stock. This is the second coat for the top. Third coat on the case. Third coat on the top; two more to go. 6 Quote
Von Posted January 9 Report Posted January 9 On 1/8/2026 at 11:32 AM, gee-dub said: Couldn't resist. I am really enjoying how the color is coming out in this decade old walnut stock. As well you should. It's gorgeous! 2 Quote
wtnhighlander Posted January 9 Report Posted January 9 Yep, that color and grain pattern is quite beautiful. 2 Quote
Popular Post gee-dub Posted January 19 Author Popular Post Report Posted January 19 I missed a spot of finish along an edge of the top. A new razor blade makes a nice mini-scraper to remove the excess finish. The area blends in when I buff out the overall piece. When a piece is a little large for the adjustable height tables I clamp them together with pieces of scrap. This lets even a skinny old stroker like me tip the casework up onto the tables safely. I use wedges to make the tables level and coplaner. Every house has crooked walls and floors but when setting drawers I like everything to be true to Mother Earth. I can deal with the actual installed position later. I keep a shoe box of shims and wedges handy. The level is self explanatory. The weird white thing is some gadget my mother in law had to help her move items in the home. I keep it in a corner of the shop and use it to raise things like the tables to slide wedges under. Nice and level. I use the same spacers I used to set the back slats to set the spacing on the drawer fronts (1/8"). I use figure 8 connectors to attach the top and we end up here. Thanks for coming along for the ride. 7 Quote
pkinneb Posted January 19 Report Posted January 19 Just beautiful!! Your attention to detail is second to none! 1 Quote
curlyoak Posted January 20 Report Posted January 20 one more detail for this very special project. Sign and date! A pleasure to follow along! Quote
Mark J Posted January 20 Report Posted January 20 Great work. I enjoyed following along. I'm almost disappointed you're done . 1 Quote
Popular Post gee-dub Posted January 20 Author Popular Post Report Posted January 20 On 1/20/2026 at 2:36 AM, curlyoak said: one more detail for this very special project. Sign and date! A pleasure to follow along! I create a recess on the boack or bottom of pieces with a 1" Forstner and glue in one of these cherry discs before the top coat goes on. I sign and date with a fine point felt pen in the area above the laser cut name. Sorry about the blurry pic. My coffee hasn't kicked in yet. Also, the surface is smoother than it looks in this pic. Trick of the light I guess. 5 1 Quote
Coop Posted January 20 Report Posted January 20 Your pieces always come out beautiful. I get as much from your helpful tips as much as from the build itself, like extending your work top with the clamps. 2 Quote
Von Posted January 20 Report Posted January 20 Echoing others: very nice work and thank you for sharing. Quote
Popular Post gee-dub Posted January 20 Author Popular Post Report Posted January 20 Right back at you guys. Most of the stuff I do I have learned from others on the forums who are willing to share their methods, tips and tricks. I just use the journals to re-state things since there are those who are at a different place in their craft-journey and can learn from our mistakes . I know folks sometimes feel like they are repeating themselves but we are all at a different place in our path. Things we take for granted may be an eye-opening event for someone else. Toss it out there and something may stick for somebody and alter their approach to the craft. 5 Quote
fcschoenthal Posted January 21 Report Posted January 21 On 1/20/2026 at 9:13 AM, gee-dub said: I sign and date with a fine point felt pen in the area above the laser cut name. Do you ever have issues with the finish reacting to, or smearing the sharpie? Quote
Popular Post gee-dub Posted January 21 Author Popular Post Report Posted January 21 On 1/20/2026 at 5:06 PM, fcschoenthal said: Do you ever have issues with the finish reacting to, or smearing the sharpie? I sign and date with a sharpie. I then spray a quick shot of Watco lacquer on the cherry disc. This seals it and any following finish material doesn't give me any trouble. Most "permanent" felt pens use alcohol as a carrier so sealing with shellac is not an option. A spray poly or lacquer seems to work fine. Once cured I can follow with whatever I like without issue (so far). 4 Quote
fcschoenthal Posted January 21 Report Posted January 21 On 1/20/2026 at 7:39 PM, gee-dub said: I then spray a quick shot of Watco lacquer Thanks, I'll give that a "shot". Quote
Mark J Posted January 21 Report Posted January 21 11 hours ago, fcschoenthal said: Do you ever have issues with the finish reacting to, or smearing the sharpie? I sign my pieces with an archival ink pen before finish. I have used wipe on poly or wipe on hard wax oil without damaging the signature. It's easy enough to do some scrap test pieces the next time you're doing some finishing. 2 Quote
Chet Posted January 21 Report Posted January 21 That came out really nice Glenn. I really like the grain on the drawer fronts. This piece could pass as a small executive desk. Quote
fcschoenthal Posted January 21 Report Posted January 21 On 1/21/2026 at 11:20 AM, Chet said: This piece could pass as a small executive desk. Would that make it a Junior executive? 1 Quote
Popular Post gee-dub Posted January 21 Author Popular Post Report Posted January 21 On 1/21/2026 at 9:20 AM, Chet said: That came out really nice Glenn. I really like the grain on the drawer fronts. This piece could pass as a small executive desk. That's funny because I have a desk for myself on the list. LOML made the same comment about the form-factor. I think the desk will live in a different room that has no "Bradley-made" furnishings to date. Therefor I have no "style" to match to. I may make a run at my past and make a desk with a strong G&G influence. It's been too long . I've got the material but the large mirror frame comes first. 5 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.