Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Where is your bench?

Featured Replies

I have decided to build a new workbench. I can't decide if I should place it next to a wall (and therefore have hand tool storage at arms length), or place it in the middle of the shop for easy access to all four sides.

Anyone want to weigh in?

I have my bench in the middle of the shop, and I usually gravitate to only one side of the bench. This could be because I have another table behind me where I keep all my loose tools and pieces :) I like it in the middle because there are times where I have to walk around all four sides to access parts. It comes in handy.

My shop's too small for a bench in the center, so I'm against a wall.

The basic rule (according to the Schwarz, at least) is that your bench needs to be able to hold your workpiece in three ways such that you can work on a.) its face b.) its edge c.) its endgrain. No reason you can't do that with the bench against the wall. Having the luxury of a bench in the middle of the room, OTOH, gives you more options for how you approach and orient yourself.

Have you considered adding mobile wheels to the base to give you both options? Not those mobile bases you put equipment on top of (those can still move with force), but Rockler in particular sells a set of four wheels which attach to the legs of a workbench and kick up and out of the way when stationary. I am working on a combo bench / outfeed table right now myself and just installed them to the legs tonight.

I have mine up against a wall as I had the same thought about being close to my hand tools, and it's in the place that made the most sense organizationally at the time...and frankly the only space I had to place it. I hate it. I'm now making arrangements to get it in the middle of the shop...which is a total PITA for a long, boring story about finding a place to store a trailer, but I'll spare you the details. Suffice it to say, I'm jumping through a lot of hoops to move it. I feel way too restricted with it against the wall.

Mine is 18" from 2 walls however the one end is under my wood rack so I don't have access to that end of the bench but I do have access to 3 sides.

Mine's up against a wall. I'd love it in the middle of the room, but my shop's just too small and I can do what I need where it is, and pull it out if I need to work on a larger piece.

the one im planing on building will be in the middle of the room because i will use mine for carving more then hand sawing and plaining. need to be able to walk all the way around and swing a hammer from any direction.

The one remaining bench I have is wedged into a tight spot, surrounded by three walls and has a shelf 24 inches overhead.

The other bench I had met an unfortunate demise quite suddenly.... and shortly after being completed. The new bench is planned, but will most likely not be built until spring for a variety of reasons. The planned location of this bench will be stored in the center of the shop, but wheeled out to the edge of the work area. I plan on having only two access sides to this bench.

This is partly because I want to add (eventually) a face vise and a tail vise, but need to factor size of the doorway in when I build the bench. (I'm actually leaning now towards the sawhorse concept of bench due to how much I need to store inside my "shop" after each use. And those flip top tables are coming back into the plan.)

I have a minimum of 3' around all four sides, the bench sits at the rear of the table saw. I have a 4' outfeed table attached to the saw and the bench serves as additional outfeed support. While the bench is heavy it is easily shifted [linoleum on concrete] in the past I've had many different layouts and far prefer to have all sides accessible as well as other surfaces that can serve as additional support.

What a great discussion. I just started debating the same question for a new shop. For those of you who keep your bench in the middle of the shop, do you also have another bench of sorts along the wall? Or do you have another arrangement to keep tools close at hand without taking up bench space?

I used to have my bench against a wall. I now have it in the middle of my shop - or least away from a wall. My bench is rather larger as it is 3 ft wide by 10 ft long so I just could not give up that much wall space. I really like having it out in the middle of the room. It allows me and my boys be working on things at the same time. Also frees provides for easer access to storage under the bench - which for me is more wood storage. I have recently re-arranged some things in the shop so I have a smaller bench with hanging cabinets against the wall behind my main bench. Works out great for me given the size of the bench...

Basshunter

I fall into the "use the bench as outfeed support for the table saw" catagory. That way I get double duty out of it. Technically triple duty...workbench, outfeed table, and assembly table.

I fall into the "use the bench as outfeed support for the table saw" catagory. That way I get double duty out of it. Technically triple duty...workbench, outfeed table, and assembly table.

Same here. My bench is 7'x4' and is my workbench/outfeed table/assembly table. Right in the middle of my shop.

Mine sits right in the middle of the Hand Tool area of my shop.

ShopPics7-9-12005.jpg

I love being able to walk around the bench, and the matting on the floor makes the area comfy and safe if I happen to drop a tool.

John

In my previous garage shop, I had the bench against the wall. I was often annoyed at not being able to work on something from the side or back.

In my basement shop, the L shape of the shop is perfect for having a 9' x 14' bench area for the 2' x 6' bench, which I use as an assembly table too. Some of that area will be cabinets/countertop and the infeed/outfeed area of the tablesaw, jointer, and planer though. I don't think I could deal with my bench being infeed or outfeed support. I'd be clearing it off too often to make a cut. I use my router table as outfeed for the tablesaw.

Mine sits right in the middle of the Hand Tool area of my shop.

ShopPics7-9-12005.jpg

I love being able to walk around the bench, and the matting on the floor makes the area comfy and safe if I happen to drop a tool.

John

I would love to have a nice mat like that. Something I will have on my wish list for sure :)

I would love to have a nice mat like that. Something I will have on my wish list for sure :)

I get them at Harbor Freight for $6.00 a 4 pack when they are on sale.

John

  • 1 month later...

I like having my bench mobile as my shop is in a two car garage, but I also like a firm bench so mine has retractable casters that are fairly inexpensive and easy to use.

A better question might be, "Space constraints aside, where would you put your bench?" I bet many folk's bench position is more of 'what is available rather then what is ideal....

As an example, I preferred my bench out in the middle of the shop. However, I built an assembly table and took delivery of 3000bf of lumber -- now my bench is against a wall... Now that I am working with a bench against the wall, I can state with some confidence that I prefer it out in the open... I actually perform many 'bench like' activities at the assembly table --- it is out in the open...

If space allows for either, and the budget can handle it, I'd reccomend both!

I have my bench against the wall and an assembly table in the middle. Inevitably my bench is always covered with random junk, so my assembly table gets far more "work bench" like use than an assembly table probably should.

  • Author

If space allows for either, and the budget can handle it, I'd reccomend both!

I have my bench against the wall and an assembly table in the middle. Inevitably my bench is always covered with random junk, so my assembly table gets far more "work bench" like use than an assembly table probably should.

I didn't consider this. Good idea!

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Who's Online (See full list)

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.