Recommended Posts

Posted

You guys seem to like my little boxes so here's a few more.  Firstly a box in Oak, with ebony detailing:

 

DSC_0002-5.jpg

 

DSC_0005-5.jpg:

 

...and a Brown Oak lining, with a small chamfer worked on all exterior corners.  Then there's another:

 

laldd.jpg

 

sfger.jpg

 

...in spalted sycamore, with the handle worked into the solid of the front rail.  Lastly, a sculpted box in solid teak:

 

llsf-1-1_zps5030b7ed.jpg

 

34350ggd7-1-1_zps70d92446.jpg

 

...with an English Walnut lining.  Construction is secret mitre dovetails, Ebony plinth - Rob

Posted

Third one is definitely my favorite.  Love the gentle curve of the sides, the ebony plinth and the sculpted handle on the lid.  So Krenov.  And mitered dovetails to boot?  Well done sir.

Posted

Great job, I especially like the third one as well. I remember your response in another thread on hinges. What type of hinges did you install on these beauties?

Posted

i like the third one as well but it needs inlay muhahahahahahah just kiding i am folcusing on learning inlay and stone work with wood right now. they all look realy nice but the third is the one i would pick up looks warm and eligant

Posted

To echo the others its number three. Scrolling down the images they all caught the eye but the best was kept for last. Although when box number one is open the contrast of oak, ebony and brown oak is very pleasing indeed. Great work! 

Posted

The teak box took a lot of effort to do as I had to make a special plane:

 

asdmmdm.jpg

 

kamfl2f5r.jpg

 

...with a curved sole so that I could do the shaping.  The plane is in maple with a rosewood base and is made in the traditional JK way from three parts, but with a brass cap and 'shop made bolt.  The pivot point on the side is actually a hex allen bolt machine screw which was then tapped into the side of the brass cap.  The little handle is inset into the front edge and then shaped with riffler files, scrapers ground from the end of HSS hacksaw blades and then finished with sandpaper...very fiddly!  The ebony plinth is mitred and then screwed in place on the underside...once secure it was shaped to the smooth profile with the maple plane - Rob

  • Like 2

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.