RichardA Posted May 7, 2014 Report Posted May 7, 2014 I did high school woodshop in 1957, yeah, I know "before your time"! The shop teacher's name was Mr. Johnson...I don't think he had a first name, He was probably a Klingon! But he was a good teacher! I was doing some sanding in my little shop yesterday, you know how that goes, the last sanding before finish, just touch up and final quality control, and I like the feel of being a part of what I do! All of a sudden, the clouds outside covered the sun and it got pretty dark! But I flashed back on some posters Mr. Johnson had around the shop! I can only remember 3 of them! #1 Love Your Fingers! #2 Listen To Your Sandpaper! #3 Use All The Light! It was dark, so I used the light coming through the door, to catch the errors! And my sandpaper told me when the product need sanding and when it didn't! That's what brought the flashback! As far as love my fingers goes, I've always been partial to hanging on to all 8, with a special emphisis on using the opposable thumbs to help protect the other 8. What do you guys remember from shop or a woodworking class that sticks with you! Quote
Trip Posted May 7, 2014 Report Posted May 7, 2014 ==>What do you guys remember from shop or a woodworking class that sticks with you! Missing three fingers... Radial Arm Saw --- Certainly drove home the safety message... Quote
wdwerker Posted May 7, 2014 Report Posted May 7, 2014 A guy was turning a big bowl when it came off the lathe, flew across the room, hit the far wall and exploded into shrapnel ! it took the skew out of his hands and flipped it point first through a 3/4 plywood tool cabinet. Freaked the class and teacher out ! Quote
wtnhighlander Posted May 7, 2014 Report Posted May 7, 2014 Aahhhhhh....If only woodshop had been available at my High School.... Quote
Eric. Posted May 7, 2014 Report Posted May 7, 2014 I remember being stoned all day every day sophomore to senior. Can't say I learned anything in high school shop class, except maybe some turning. I spent most of my time at the lathe. Because that was trippy dude. 1 Quote
Beechwood Chip Posted May 7, 2014 Report Posted May 7, 2014 All I remember is that putting a profile on a piece with a router table was really cool and really easy, and that slapping one thick coat of finish on a piece and then letting it dry in a dusty school wood shop leaves a lousy finish. I'm still reluctant to deal with finishing because of a bad experience in shop. Quote
el capitán Posted May 7, 2014 Report Posted May 7, 2014 I just remember using the dust collection system to suck up our smoke when the teacher was in the other shop. Quote
DaveT Posted May 7, 2014 Report Posted May 7, 2014 Getting stabbed repeatedly with a chisel. Luckily the other guy was such an idiot he stabbed me with the handle and all I got were some bruises Quote
TerryMcK Posted May 7, 2014 Report Posted May 7, 2014 I was in metalwork class at high school and was working on a screw cutting lathe. I wasn't cutting threads at the time just facing a steel bar. It was a brand new machine and the teacher was really proud of it and allowed me to work on it. One of the class imbeciles came up while I was concentrating on the job in hand and engaged the thread cutting lever without me seeing it. Normally the speed of the spindle when thread cutting is typically a few 10s of rpm. I think it was going at 1200 rpm at the time. Needless to say the tool holder and carriage in the flash of an eye went ploughing straight into the chuck breaking several components. Fortunately no-one was injured but it could have quite easily been loss of a limb. This was in the early 1970s and I think classroom safety nowadays is worlds apart from then. The guy was sent home but not expelled. Quote
Rapid Roger Posted May 7, 2014 Report Posted May 7, 2014 I was in 8th grade shop class in 1957. All I remember is that Mr Wickliffe had a hang up with spokeshaves and keeping them sharp (don't even own one now) and clean paint brushes. After using and cleaning a paint brush, you had to take it to him and wipe it across your face to prove it was clean. I know that I made something in shop class that year but, I can't remember what it was! Rog 1 Quote
RichardA Posted May 7, 2014 Author Report Posted May 7, 2014 I was in 8th grade shop class in 1957. All I remember is that Mr Wickliffe had a hang up with spokeshaves and keeping them sharp (don't even own one now) and clean paint brushes. After using and cleaning a paint brush, you had to take it to him and wipe it across your face to prove it was clean. I know that I made something in shop class that year but, I can't remember what it was! Rog Rog, It seems like we went to different schools together! Remember walking to school? Uphill both ways? Quote
Rick A McQuay Posted May 7, 2014 Report Posted May 7, 2014 ==>What do you guys remember from shop or a woodworking class that sticks with you! Missing three fingers... Radial Arm Saw --- Certainly drove home the safety message... Heh, my shop teacher was missing a finger he lost to a radial arm saw. Believe me I paid attention to lesson #1: never put anything in the path of the blade that you want to keep in one piece (goes for any saw). I also remember an oak board kicking out of a Unisaw and punching a hole in the wall. Lessons 2 & 3: stand to the side of the board when ripping and never stand behind someone using a table saw. Quote
Beechwood Chip Posted May 7, 2014 Report Posted May 7, 2014 I remember a lot more from my metal shop class. I never used a wood lathe, but I was good enough at the metal lathe that people asked me to do their parts for them. That's where I learned to use a tap and die. And that's where I didn't do arc welding... Put on this opaque shield and move this thing that you can't see close to this other thing that you can't see, but not too close! Yeah, right. If you spent a class period trying and failing, then the shop teacher would just do it for you. Our metal shop project was a reflector telescope, and the wood shop project was a vanity mirror, like this. Quote
Rapid Roger Posted May 7, 2014 Report Posted May 7, 2014 Rog, It seems like we went to different schools together! Remember walking to school? Uphill both ways? Yea, and not only was it uphill both ways but, living in Kansas there was a blizzard going in the morning and a heat wave going home in the afternoon too! Rog 1 Quote
RichardA Posted May 8, 2014 Author Report Posted May 8, 2014 Rog Hey Rog, what I really hated was all that hail during recess Quote
BuilderBill Posted May 8, 2014 Report Posted May 8, 2014 I remember Rodney jointing off a small part of his middle fingertip and Mr. Sheehan dragging him around the shop on tiptoes with his bloody hand in the air so we could all see the consequences of not using a push block at the jointer. Definitely made an impression on me! Also learned that making a 4-square board with hand tools was not my thing and that a brace and bit with a screwdriver bit is about the most useless thing in the world when it comes to driving screws. Metalworking was fun, that was where I learned that hot metal will burn you and it doesn't look any different from cold metal. And it's heavy. Quote
wtnhighlander Posted May 8, 2014 Report Posted May 8, 2014 Really Rog? Uphill both ways, in KANSAS?!?! Do they even know what a hill looks like in Kansas? 1 Quote
Byrdie Posted May 8, 2014 Report Posted May 8, 2014 I have a twin brother and we're both somewhat "crafty." Our first years of higher education the "elective" classes were assigned for us by the district. He was always the more artistic one of the two of us. Could draw anything from scratch without a model to look at. He got the wood shop and metal shop classes. I was the more technical and mechanical of us two. I got the advanced art and drawing classes. I can now draw well enough to make a plan or to figure out how something should look. If I spend long enough I can make a decent piece of art, but probably not something I'd try to sell. But woodworking comes natural to me and I enjoy it much more. As far as wood working goes, my brother likes to turn - mostly duck calls - and he's a handy DIYer. But his natural talent still lies in artwork. Need a poster done or a paper mache animal for your kid's senior night (he did a giraffe and a bear, life size) and he can crank it out in no time. Funny how these things work out. Far as I know, the school we went to, which also had a fine auto shop at the time, doesn't offer any shop classes anymore. Quote
RichardA Posted May 8, 2014 Author Report Posted May 8, 2014 Really Rog? Uphill both ways, in KANSAS?!?! Do they even know what a hill looks like in Kansas? I made a cross-country trip once. Took the 'scenic route' through Kansas. The only place I recall being less hilly than Kansas was the big salt flat at Boneville. Aw, Highlander, even after your cross country trip you should know that those overpasses are tall! Quote
Rapid Roger Posted May 8, 2014 Report Posted May 8, 2014 Aw, Highlander, even after your cross country trip you should know that those overpasses are tall! Despite what everyone thinks, Kansas does have trees and hills! Every county is allocated at least one tree and a hill by the state even if we have to replant our tree every year and build our own hills. It is a beautification project started in the 1800's. Rog Quote
Dave Posted May 8, 2014 Report Posted May 8, 2014 I remember: 1. watching a the shop teacher feed the end of a 2x4 into the jointer to show how powerful it was - scared the heck out of me. I don't think I used the jointer the first year. 2. the shop teacher asking to borrow a pocket knife and four of them sliding across the table - now you can't even take a butter knife to school 3. leaving the key in the drill press chuck and turning it on. I turned it off real quick and ducked until it flew out and slid across the floor - to this day I always look before I start the drill press 4. I hated drafting in jr. high (I mean really hated...), for some reason took it again in high school and college. Started making a living drafting, that was 25 years ago and I'm still in the same industry Quote
Jasahan Posted May 9, 2014 Report Posted May 9, 2014 My shop class was more recent. Middle-school, i think (so...17ish years ago). Made some bookends out of my initials (okay, so they were Steven Tyler's initials, because I was a bit obsessed with Aerosmith at the time) using a scrolll saw and a hand plane of some sort. And we made a sheet metal dust pan. Which means I used tin snips, and the teacher did the spot welding. As far as I know, no one got hurt. But we also didn't make anything cool. In my father-in-law's shop class, they built a house from the ground up and then deconstructed it. Quote
Rick A McQuay Posted May 9, 2014 Report Posted May 9, 2014 Something else came to mind -- we were allowed to use draw knives at will but were never allowed to touch the chisels and planes.Sent from my T-Mobile G2 using Tapatalk 2 Quote
markpelly Posted May 12, 2014 Report Posted May 12, 2014 I remember making a god awful shelf for my locker in 7th grade. I took construction technology for a couple years and I made a badass shed that was also a hybrid greenhouse. Built the whole thing myself, it was a fun project. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.