Janello Posted May 23, 2014 Report Posted May 23, 2014 Finished the cedar plant table for the wife. It's the first table I've ever made, so please feel free to critique! I plan to finish this with Sikkens Cetol 1 before putting it out on the deck. Quote
Coop Posted May 23, 2014 Report Posted May 23, 2014 SWEET!! The top and the legs look great together. I'd be darn reluctant to put this thing outside but I know that's what it was built for . Good job Quote
..Kev Posted May 23, 2014 Report Posted May 23, 2014 Very nice work! I'm sure the wife will be quite happy! Quote
Tpt life Posted May 23, 2014 Report Posted May 23, 2014 Like the linked design of stretcher and apron. Good proportion and design. Fairly simple and elegant. Thumbs up. Quote
woodieboy Posted May 23, 2014 Report Posted May 23, 2014 Fantastic work, design, wood and finish. Thanks for posting! Quote
Janello Posted May 23, 2014 Author Report Posted May 23, 2014 I was quite impressed with the finish this product produced, so I posted more pics. I used Sikkens SRD re Natural. Quote
wtnhighlander Posted May 24, 2014 Report Posted May 24, 2014 Wow! I would hate to put that outside, it looks great! Quote
Janello Posted May 24, 2014 Author Report Posted May 24, 2014 Thanks for all the nice compliments! Quote
nod Posted May 27, 2014 Report Posted May 27, 2014 i'm starting my first outdoor project as well. this has set the bar high. nice job! Quote
Byrdie Posted May 27, 2014 Report Posted May 27, 2014 Very nicely done. I like the design and the outcome of the color. Quote
MattIsBuffalo Posted June 5, 2014 Report Posted June 5, 2014 wow I'm really impressed and also know what finish I'll be using when is comes time to build some outdoor furniture again thanks for posting the follow up pics Sent from my HTCONE using Tapatalk Quote
brooklyngohardwood Posted June 5, 2014 Report Posted June 5, 2014 Wow, looks amazing! I'm currently working on an outdoor dining table and can only hope it comes out so well. Curious about your finish as I hadn't heard of Sikkens Cetol before. Is Sikkens SRD a penetrating oil formula and not a film finish/varnish? What made you choose it over, say, BLO or some other more traditional oil finish? I just read that Sikkens is one-coat which seems appealing? Or maybe I should be asking in the Finishing forum Quote
wouldwurker Posted June 5, 2014 Report Posted June 5, 2014 Very pretty - love love love the curvy grain on that one stretcher. Curious, will water pool up and stand in the grooved slats on the top, assuming it's draining from the bottom of a pot? Quote
Janello Posted June 6, 2014 Author Report Posted June 6, 2014 Chris J. At first I didn't know what I was going to use. I did some online research and found a lot of good feedback on Sikkens Cetol1 for Cedar. When I went looking in local stores for it, I could only find the SRD re product on the shelves. A quick search on Sikkens website revealed the description to be similar to Cetol1 except the SRD had UV protection (sounded like a winner to me!). It is an Oil based stain and yes, they recommend only one coat. I did however find I needed to back wipe most areas because it soaked in fast! It's pretty thin stuff and actually wicked right into the joints. Vinnyjojo. Although it looks from the pics like it might be grooves, it's actually seperate boards with 1/4 spacing all the way through to avoid just what you said would happen! Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.