Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

New Shop - Finally!

Featured Replies

Been without a shop for 2.5 years, since moving out of the city.  But as of tomorrow morning the agony is over.  Materials being delivered for my new 14x24 workshop (some assembley required).  2-3 more weekends and I should have a fully functional woodshop.

 

I'm so tickled I can't hardly stand it.

Congradulations, on getting a new pile of lumber!   Looking forward to see it turned into a shop.

Congrats I'm about to turn a garage into a shop it's 20x22 can't wait so I know you excitement.

That's just about the same amount of floor space I will have in my basement shop, so I will be anxious to see how you arrange things. Not to nag, but pictures really would be very helpful ;-) Good luck on your project!

-TWS

Congrats.. Would love to see pics..

  • Author
Sorry for the delay.  Here are a few pictures.  I didn't make as much progress as I had hoped this weekend.  Lost most of Saturday to a laundry list of problems (wrong studs delivered, broken nail gun, etc)  So far I've finished the floor and one wall is framed but not standing yet.  Also I've build all of the roof trusses but no pic of them.
 

You never get as much done as you like but it's moving along and that's what matters.

that is how my little shed is I want to extend mine. just have to figure out how to do the roof..  looks good keep it up and you will have it dusty in no time

looks good.   it amazes me what other people can do. i tried to do a 300 sqft. and the city required  me to put the thing on a 12" by 12 " full footer.

Sorry for the delay.  Here are a few pictures.  I didn't make as much progress as I had hoped this weekend.  Lost most of Saturday to a laundry list of problems (wrong studs delivered, broken nail gun, etc)  So far I've finished the floor and one wall is framed but not standing yet.  Also I've build all of the roof trusses but no pic of them.

Looks like you've busted butt so far!! Great progress.

Sometimes I wish that my shop had wooden floors. Working barefoot (shoes get kicked off as soon as I get home) on concrete can wear you down by the end of a weekend.

  • Author

looks good.   it amazes me what other people can do. i tried to do a 300 sqft. and the city required  me to put the thing on a 12" by 12 " full footer.

Fortunately I live outside the city limits so I don't have any code or permit issues.  Otherwise it would be a lot more expensive.

  • Author

Added a couple of new pics to the gallery.  Didn't get as much done as I'd hoped this weekend due to haveing to go out of town unexpectedly on Saturday.  I did get the 4 walls up on Sunday and should get the roof trusses set and the roofing done this weekend.  Then just the siding will be left and the shell will be complete.

 

Thanks for all of the comments.

What will the roof and siding be made of?

  • Author

What will the roof and siding be made of?

The roofing will be 15# felt covered with standard shingles.  Siding will be 4'x8' pre-primed wood siding (SmartSide from Lowes).  To be painted later.

  • Author

Made some good progress this weekend.  Trusses up, Siding on 3 sides.  Some roof decking down.  Should finish the outside this weekend and then I'll be moving in.  I'll finish the inside as I go.

 

New pics added to the album

Looks good, it's a lot easier to sheet the walls before you stand them it's too late now but you should also have a double top plate to tie the walls to each other and your sheeting should cover your rim joist or at least lap over a little for tie-ing the walls to the joists this will work the way it is but, it wouldn't pass inspection from the building dept. It will make for a nice little shop please don't feel like I'm slamming your building practices I've been a carpenter my entire adult life and, was just trying to give you some pointers for if you ever do this again at some point. 

  • Author

Higtron - thanks for the pointers. Believe me I need all the pointers I can get.  They say you learn from your mistakes and beleive me I've learned A LOT from this building.  This is actually a trial run as I plan to build a bigger shop eventually and this will become a storage building.  We're also planning a DIY addition to our house. Hopefully the mistakes I made with this building will help out when I tackle that project.  Luckily i'm outside the city limits so I don't have to wory about inspection.  Otherwise I'd be in over my head.  but like you said it should make a decent shop once it's done.

  • 3 weeks later...
  • Author

Well it's been slow progress but the shell is almost done.  Just needs shingles, trim and a door and I can move to the inside.  Work should progress more quickly inside since I can work under the lights and I'm not limited to only daytime hours.  Since it's almost dark when I get home I get very little done during the week.

 

added some new pics to the gallery.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,009 Total Members
  • 3,644 Most Online
  • Joseph b Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.