Recommended Posts

Posted

I just spent a boat load of cash on some new festool gear, but this planer has come up at a great price ( and includes the tables and extra knives). I am pondering buying one.

Currently I have a ridgid tp1300, which is a pretty awesome planer. It has three issues I don't like:

1. Dust collection - the hood for DC is a reducing port from 4 to 2.5 inches. I connect a 5" hose, and it steps down twice to get the chips and dust. It chokes my dust collector.

2. It's no longer made, so blades are getting harder and harder to buy.

3. It doesn't have a 5/8" stop, or adjustable turret to make one.

I don't really need a new planer, but I am having a hard time passing this sale up. Any advice from current or former owners of the dewalt?

Posted

Travis Larson the senior editor of family handyman just wrote about this planer on page 6 of the current (dec/jan) issue. To be blunt it makes me want to get one

Where do you see it on sale

Posted

I have a DW735, and it performs quite well. It's at the top end of being too heavy to call portable, weighing in at 98 lbs. Three knives make for a smooth cut, and the chip extraction is great. If you really want to spend the money, there is even a shelix type cutterhead available for it.

Posted

I have a DW735, and it performs quite well. It's at the top end of being too heavy to call portable, weighing in at 98 lbs. Three knives make for a smooth cut, and the chip extraction is great. If you really want to spend the money, there is even a shelix type cutterhead available for it.

Do you use a dc system with the planer? If so, what size hose? Do you find the hose gets in the way of the out feed?

Posted

Travis Larson the senior editor of family handyman just wrote about this planer on page 6 of the current (dec/jan) issue. To be blunt it makes me want to get one

Where do you see it on sale

Busybeetools.com

Posted

I have one and I'm happy with it , I got mine on clearance years back at Home Depot . If I were looking for one now I don't know if I would pay $600 for one .

Yes, it's about that. 589 for the planer, extra knife set, and the infeed/out feed tables.

Posted

Do you use a dc system with the planer? If so, what size hose? Do you find the hose gets in the way of the out feed?

 

 

 

I use a DC with 4" hose just made a hose hanger that keeps it up and out of the way from boards coming out  .

Posted

I have the DW735X, it's a wonderful planer for the price. I paid 650 for the planer, extra knives, in/outfeed  extensions, and the dewalt table to mount it on. I'm happy with it so far, the knives are reversible and are available everywhere. I use a DC with 4" hose. My only complaint is that the hose is in the way of outfeed so you need to adjust the hose to the side of the unit, or make a hose hanger for it. It's also deafeningly loud, so hearing protection is a must.

Posted

Do you use a dc system with the planer? If so, what size hose? Do you find the hose gets in the way of the out feed?

Tried it, hose is indeed a pain. I usually just open the garage door and blow the chips outside. Don't stand it the output stream, those chips have serious velocity!
  • Like 1
Posted

Tried it, hose is indeed a pain. I usually just open the garage door and blow the chips outside. Don't stand it the output stream, those chips have serious velocity!

    I like the 735, and my dust collection is interesting!   It's green, and I empty just after dark at 65mph.... Makes nice roadside mulch!

post-15288-0-71735800-1415932245_thumb.j

  • Like 1
Posted

I like the 735, and my dust collection is interesting!   It's green, and I empty just after dark at 65mph.... Makes nice roadside mulch!

Yea that dust collection system will litterally blow you away. Dont stand in front of it....
Posted

I really like mine and the extraction point does make the hose get in the way but that's a great deal with extra knives and the metal tables. I got mine from Craigslist. I'm going to save my pennies and replace the throw away blades with those Shelix blades.

Posted

I've upgraded mine with a shelix. It's much quieter and planes exotics without gouging. The drawback is- it's amp load now has a tendency to trip my 20 amp breaker if I take too much material off and don't have the tables waxed really good. I'm thinking of wiring a 30 amp breaker near it when I move it into the new shop.

  • Like 1
Posted

I picked up the  DW735 a long time ago at a great price from Lowes, and it's run flawlessly.  I've upgraded it with the tables, and more recently a Shelix, whch definitely makes it a more capable machine - I really don't worry if the knives are dull, or if I'll get tearout (I do some work with figured maple).  I have it connected to my Delta 50-750 dust collector with about 24" of flex pipe and then 4" smooth walled pipe all the way to the DC and it does just fine.  A long milling session will fill the bag quickly, but changing is is not that terrible.  Keeping the tables clean and waxed is definitely a good idea - makes a huge difference in eliminating snipe.

Posted

Dust collection can be a pain but here is my solution. With the blower on the planer, I don't have any issues with the sharp 90 degree elbow. My only gripe is the same as everyone else, factory blade life.

post-15162-0-81813500-1415977389_thumb.j

Posted

I picked up some HSS blades from Infinity, and they lasted twice as long as the OEM, but I did find a guy that will "hone" these blades, so I can get a second use from them.  I haven't tried it yet, but I have every intention of trying... OEM blades are about $60 , Infinity's are about $80.. As much as I use the planer, just tossing that kind of money, just doesn't work for me!  Shelix is about $500., so with Christmas, birthdays and a bunch of other money spending reasons hitting soon, the shelix is out of the question for the time being!

Posted

I'd have to say this is the best upgrade I ever did for my shop. Went from a Ryobi AP1300 (which I believe uses the same blades as the Ridgid, and are available on Amazon, or were) to this and I'm very happy. At some point I'll get the shelix after I upgrade other areas of the shop.

Posted

I've had this planer for a couple of years and I absolutely love it.  The dust collection is fantastic and the thing is a beast.  Blades are easy to change too.  Unless you're going to a big 220V floor standing model, this is definitely the best you'll find.

  • Like 1
Posted

Yes - the infeed table does no problem, but the outfeed table is mounted a little closer to the body of the unit, so in order to fold the table up you need to raise the unit up to about the 5" mark.  Then and can be lifted but needs to be secured in place or it just falls down again.

Posted

Silly question perhaps, but do the folding tables fold up and out of the way when the unit is being stored (tool-less-ly)?

  Yes they fold... however be careful on the outfeed side.. On my planer the casting wasn't very well finished, and to make the table fold, I had to take a file to the casting... Now the table does what it's supposed to do.... Use a bungie to make sure it stays up and out of your way!

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Who's Online   0 Members, 0 Anonymous, 45 Guests (See full list)

    • There are no registered users currently online
  • Forum Statistics

    32.1k
    Total Topics
    437.6k
    Total Posts
  • Member Statistics

    26,008
    Total Members
    3,644
    Most Online
    Bob44
    Newest Member
    Bob44
    Joined