Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Regrets?.....what would you change if you did it again?

Featured Replies

Hi there. I have recently purchased my first house and was able to convince my wife to park outside so i can use the 1 car garage (12' x14') as my shop. I have torn out the existing plaster and have insulated the walls and now it sits, framing exposed. I essentially have a blank slate to work with, but before i proceed i would like to know if there are any regrets that any of you have with regards to your own shops? ie. lighting, dust collection, shop layout, storage cupboards, plywood or drywalls walls, etc. I realize that there will always be tradeoffs but I'm hoping to avoid some pitfalls by learning from others mistakes.

 

I have a table saw with 52" fence, 6" jointer, lunchbox planer, 10" miter saw, small router table, workbench and a slew of other construction tools that need to fit into this "cozy" workshop. Your input would be greatly appreciated. Thanks!

I'm sure insulation is in your plans, and also as many electrical outlets as your breakers will accommodate. I also like retractable cords from the ceiling. Good luck, a clean slate is neat to work with and it sounds like you have a top notch wife!!

  • Popular Post

My only regret is that I didn't buy a bigger house with a bigger garage.

 

Like Coop said...the insulation and outlets are the only things you can't go back and change without a huge inconvenience...do it.  And add 220 if you don't already have it.  Lights, lots of lights.  I like T8s.

 

The rest is part of the journey.  There's no way to tell you what YOU should do because you are not the same woodworker as anyone else.  Woodworkers are beautiful snowflakes...not a one is like another...although some are more beautiful than others.  I'm a beautiful snowflake.  Coop is one of those sloppy wet ones that lands right on your nose.

I regret not having proper lighting and power.

If your "infrastructure" is inadequate it will limit you.

  • Author

I like the idea of retractable cords from the ceiling. I would have never thought of that. With floor space so important in a small shop, i like the idea to get as much as i can off of it. Will make like easy if I end up with some of the machinery on wheels.

 

The clean slate seems to be a bit of a double edged sword as it allows freedom to do whatever I choose, but with so many options is makes it hard to commit to a certain layout. I realize that a shop evolves over time and you can plan as much as you want, but wont have a real feel for things until you are in there working away. As for my wife, she just wants me to finish the thing so i will shut up about it haha. As far as im concerned thats top notch.

Consider plywood or something for the lower section of the walls. Easily removed if you need to run another power drop, and better than drywall for screwing things to.

More lighting and more power. Consider what outlets are on which breakers, so you don't trip the breaker when running multiple tools.

Lighting. Lighting. Lighting. If you have windows, consider a bench under it to take advantage of natural light.

Shop layout (and therefore dust collection) will evolve over time but don't expect to get it perfect at the start. Pick a layout that works, and go from there. Pencil and graph paper is a great way to plan a shop layout.

Take the time to paint the interior ! My first shop was dark and dingy. My current shop used to be a photographers studio, so walls, floor and ceiling were painted white. It makes a big difference !

And, if you haven't filled the garage with boxes and stuff already, I would seal the floors. I wish I had when I built mine. Sure makes it easier to sweep up. Oh, and make space available for a beverage box!

Power - Appropriate for the tools and location of outlets.  

Insulation - Highest R value you can

Regrets.. I should have married money or a least made the wife go back to college  :D

I have a basement shop, so lighting was at the top of the list for me initially, and then I added a subpanel so I had all the electrical I needed.  LED lighting has come way down, so I've added a number of LED lights to supplement the fluorescent units.  I prefer Daylight LEDs (5000K color) to Warm/Soft White (2700K), which to me is too yellow, but it does mimic incandescent and so is pretty popular.  I have also changed out most of my older tubes to Daylight, so they are the same color as the LEDs.

 

Check out Home Depot and Walmart in your area, I've found really good deals on LEDs. Lowe's is starting to come around, but prices are not quite as good. The early LEDs were not dimmable, and I've found really good deals on non-dimmable models, probably because the stores don't want to cover so many options.  I've realized I really do not have any need to have dimmable, or "mood", lighting in my shop.   :rolleyes:

 

I am using the A19 style LED bulbs (standard bulb shape) in clamp-on worklights, so I can add extra lighting in just the right locations, such as right over my lathe. My shop ceiling is open to the joists, so I had the luxury of adding outlets in the ceiling wherever I needed.  And that is about the only advantage I see to having open ceilings. 

 

Finally, if you do decide to go with fluorescent fixtures, and have attic access, check out the T8 troffers that fit flush in the ceiling between joists.  They are pretty reasonable at Home Depot.  Not as cheap as shop light fixtures, but my experience is that you only get a few years out of the new ones.  There is a reason they are sold cheaply! I have troffers in my basement.  I got them for free, and they are wider than the spacing of the overhead joists.  They are mounted flush to the bottom edge of joists.  Our kitchen is above the shop, so floor joists are closely spaced. .  My garage has wider spacing, and the same troffers would fit flush to ceiling.

 

Have fun!  Deciding how to outfit a new shop can present you with an incredible number of options/choices to make.

I am in the process of moving out of a small shop 1 car into a 2 car sized shop with a seperate finishing room. The main thing I learned in a small shop is having everything mobile. Put all of your larger tools on carts that are not overly big for the tool. Stick with one assembly table as your only surface that doesn't have a bench top tool. Space is going to be a premium and if you build too much bench, you'll lose precious space for other tools. Build wall cabinets everywhere you can. It will keep things off the floor that are not machines.

THREE car garage!

Jerry, I have one, 24x 32 and it's never had a car in it and I still don't have enough room. But, I'm probably just that disorganized!

Only thing I regret is not building a bigger shop. but if I did build a bigger shop I probably would regret not building an even bigger shop  :rolleyes:

Just put your shop together with what you have now and you'll find yourself changing it around as your needs change and you get more stuff. I've changed my shop around at least 4-5 times now. I think I'm close to where I want it now.

If I could do it again, I'd change the electrical around a bit and put more 220 outlets and and a 100amp panel vs 60amp. I designed the electrical based on my tools at the time. All smaller 110 tools. I've got 2 220v outlets.

Consider plywood or something for the lower section of the walls. Easily removed if you need to run another power drop, and better than drywall for screwing things to.

More lighting and more power. Consider what outlets are on which breakers, so you don't trip the breaker when running multiple tools.

Lighting. Lighting. Lighting. If you have windows, consider a bench under it to take advantage of natural light.

Shop layout (and therefore dust collection) will evolve over time but don't expect to get it perfect at the start. Pick a layout that works, and go from there. Pencil and graph paper is a great way to plan a shop layout.

I have three 20A circuits for 110VAC. I used different color outlets for each circuit (white, gray, orange), so I know which breaker controls which outlet. My lights are on a separate 15A circuit. I have ivory colored outlets all over the ceiling for convenient places to plug in fluorescent and task lighting.

Another consideration:

If you are using conventional shop vacs, multiple circuits means you can plug your tool into the one color outlet, and the shop vac into another color outlet, and prevent overloads. This is most easily handled by running two of the branches to the same locations along your walls, so you have outlets near each other that are on different circuits. That way tool and vac cords are plugged into outlets near each other. This becomes less critical if you are exclusively using a dust collection system, or your major tools are 220VAC, but helps if you are strictly using 110VAC, with plans to expand to 220VAC later.

I've never had the opportunity to build a shop of my own but I have worked in plenty of (mechanic) shops and I have to reiterate the importance of having your power and air, if you have a compressor, hanging with either a retractable mechanism or a simple way to wind it up and hang it, that way you are free to move around the workshop, rearrange, or move something outside for a bit.  Having a well designed electric supply can help you overcome, or at least work more efficiently, in your smaller space.  I hope that was two cents worth. Good luck!

Power - Appropriate for the tools and location of outlets.

Insulation - Highest R value you can

Good advice from TIODS..

Good insulation pays off as my shop settles around 46-48 without heat and lower 40's when it gets below zero at night.

When I asked if I had enough outlets people said double what you think you need, and as you can see, I listened.

IMG_0202.JPG

one benefit of my basement shop is that it stays around 62 degrees in the winter and in the low 70's during the summer.  ambient heat from the heating system, and benefit from central air in the summer.  Also keeps the humidity down.  For a garage, you might want to consider up-front what your heating and cooling strategy is going to be.

My one regret is not knowing what style of woodworking would work for me. I bought a bunch of power tool and turns out the noise just got on my nerves after while, I switched to hand tool and love the quiet. But that's me.

If I could start over? House for living, house for a shop :D I'm another vote for electrical. Add a couple 220 outlets even if you don't need them, you might really wish you had them someday.

I have done it again and again, 4 times.  I found the grizzly shop planer was the best assistance I had to organise my space. As everyone else has mentioned, lights and power and plenty of it as well as compressed air hanging from the ceiling. Regarding machines my advise to people when they come into my store (Carbatec in Sydney Australia) "start with what you want to end up with" It saves you a heap of time and money. Obviously it depends on your finances. Have a look through my home workshop here if you want to.

I have done it again and again, 4 times. I found the grizzly shop planer was the best assistance I had to organise my space. As everyone else has mentioned, lights and power and plenty of it as well as compressed air hanging from the ceiling. Regarding machines my advise to people when they come into my store (Carbatec in Sydney Australia) "start with what you want to end up with" It saves you a heap of time and money. Obviously it depends on your finances. Have a look through my home workshop here if you want to.

thats a beautiful shop Dave, very bright and tidy

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Who's Online (See full list)

  • There are no registered users currently online

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.