Tom Cancelleri Posted January 24, 2015 Report Posted January 24, 2015 I just started my shop cabinet build today. Finally! TS75 first use. Man it's a beast! Ripped this 4x8 sheet in half. Quote
..Kev Posted January 24, 2015 Report Posted January 24, 2015 Sweet.. Nice to see the new toys in use! Quote
Tom Cancelleri Posted January 24, 2015 Author Report Posted January 24, 2015 Sweet.. Nice to see the new toys in use! My dad was impressed by the cut quality, and how well it worked. Quote
..Kev Posted January 24, 2015 Report Posted January 24, 2015 You mentioned you were looking forward to that demo.. 1 Quote
TerryMcK Posted January 24, 2015 Report Posted January 24, 2015 Following the build Tom - glad to see the TS is getting a workout. Quote
Tom Cancelleri Posted January 24, 2015 Author Report Posted January 24, 2015 Got my wood milled for the face frame. Cutting to length. Domino layout. This is the exciting part. Can't wait to domino it all together. Quote
Tom Cancelleri Posted January 24, 2015 Author Report Posted January 24, 2015 Frame layout. Domino trim stop setup Setting domino height for 3/4 made easy. Yay for having a dad that was a machinist. Center is only off by 12 thou. Quote
davewyo Posted January 25, 2015 Report Posted January 25, 2015 You're really moving right along! Quote
Tom Cancelleri Posted January 25, 2015 Author Report Posted January 25, 2015 Pro tip for setting up the trim stop... Incra T Rule to get a dead center line. 1 Quote
RichardA Posted January 25, 2015 Report Posted January 25, 2015 The center is off by 12 thou????????? Come on Tom. 10 thou is acceptable, but 12????? Shame, shame and shame! 2 Quote
Tom Cancelleri Posted January 25, 2015 Author Report Posted January 25, 2015 The center is off by 12 thou????????? Come on Tom. 10 thou is acceptable, but 12????? Shame, shame and shame! In my defense, the wood is a touch thicker than 3/4 for sanding reasons. 1 Quote
..Kev Posted January 25, 2015 Report Posted January 25, 2015 If I'm not using the domiplate on anything around 3/4, I just set the depth by setting the handle on the show face of the wood and lowering the machine on the bench. This will always have you close enough to center to not matter. Just remember to always work off of the show face. 1 Quote
RichardA Posted January 25, 2015 Report Posted January 25, 2015 In my defense, the wood is a touch thicker than 3/4 for sanding reasons. No defense needed my friend, just pulling on that leg, for the humor! Nice work, keep at it! 1 Quote
Tom Cancelleri Posted January 25, 2015 Author Report Posted January 25, 2015 Tongue and groove setup Grooves all setup on the backs of the face frame. Quote
Tom Cancelleri Posted January 26, 2015 Author Report Posted January 26, 2015 Face glued up. Love the domino! 1 Quote
bushwacked Posted January 26, 2015 Report Posted January 26, 2015 In for this build. Looks good so far. Are you getting to use all the new toys yet or just the domino and TS for now? Quote
Tom Cancelleri Posted January 26, 2015 Author Report Posted January 26, 2015 Just the ts and the domino for today. Using my sommerfeld tongue and groove bits also. Haven't used them yet. Had them a while. Quote
HunterL Posted January 26, 2015 Report Posted January 26, 2015 Looking Fantastico! Glad your dad liked the tracksaw. Quote
Coop Posted January 26, 2015 Report Posted January 26, 2015 Ok, come Tuesday morn, gonna place the order for the Domino. Where do you guys get the best deals or just pay list price and that's part of the Kool-Aid? My dowel jig and biscuit cutter are gonna want alimony Quote
..Kev Posted January 26, 2015 Report Posted January 26, 2015 Festool sets the prices Coop so, pick it up from your favorite dealer.. Quote
..Kev Posted January 26, 2015 Report Posted January 26, 2015 There's a 10% sale in February so, you might want to check that first.. Not sure if the Domino is part of that sale.. Quote
Tom Cancelleri Posted January 26, 2015 Author Report Posted January 26, 2015 I think the 10% is kapex and its accessories only. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.