Recommended Posts

Posted

The holes lead me to believe that there should be springs for these. But I cannot find info on it to confirm. The stamped brand is tiger tool, but all my searches come up with new industrial supplies. 25695bc982532ddaed01f716168aee70.jpgc1e8313c6d8d56f94c45bc385bea35cf.jpg Sent from my SM-G900V using Tapatalk

  • Like 1
Posted

Maybe there were springs in there. I'm not taking mine apart to find out !  

I only use it when the power is out. When I was a teenager we drilled a hole in the floor to run a line for a gas space heater with grand dads brace and bit. Running out of firewood is a great motivation ! Otherwise it sits in a display in my front window at the shop.

  • Like 1
Posted

I have electric and battery drills, but always good to have backups. Plus it's fun to use hand tools, more pride in building stuff than just buying it. Although I'm very limited in my experience. Sent from my SM-G900V using Tapatalk

Posted

If you think it was springs try this. Take some pen springs and cut them to fit. It might take a little to find springs that will fit the recesses and you will need to adjust the length. This would at least tell you if springs are truly helpful. 

  • Like 1
Posted

If you think it was springs try this. Take some pen springs and cut them to fit. It might take a little to find springs that will fit the recesses and you will need to adjust the length. This would at least tell you if springs are truly helpful. 

Thank you, I'll definitely try that. Now I just need to scrounge up some old pens. Sent from my SM-G900V using Tapatalk
  • Like 1
Posted

When I was a kid my dad wouldn't let me use his power drill, so he bought me an egg-beater. I still don't have a power drill and use it for all my drilling (kinda sucks trying to put holes in masonry though).

Posted

This may work, but seems like the springs are all bigger than I need. http://m.harborfreight.com/media/catalog/product/cache/1/image/9df78eab33525d08d6e5fb8d27136e95/i/m/image_19974.jpg Sent from my SM-G900V using Tapatalk

Posted

Those springs in the jaws are just a bit smaller than the typical clicker pen springs, but I'm sure replacements can be found and cut to fit. The only thing they do is spread the jaws apart when the chuck is loosened. The jaws will still open up without them, but they may wiggle around a bit and need some fidgeting to get a new drill bit in place...especially for the larger sized bits.

 

IMG_20151024_243320984_HDR.thumb.jpg.f57

This picture shows the springs compared to the clicker pen spring.

Posted

Those springs in the jaws are just a bit smaller than the typical clicker pen springs, but I'm sure replacements can be found and cut to fit. The only thing they do is spread the jaws apart when the chuck is loosened. The jaws will still open up without them, but they may wiggle around a bit and need some fidgeting to get a new drill bit in place...especially for the larger sized bits.

 

IMG_20151024_243320984_HDR.thumb.jpg.f57

This picture shows the springs compared to the clicker pen spring.

Thank you for that picture, is there, or could there be a spring above the jaws to keep them down? Sent from my SM-G900V using Tapatalk
Posted

The jaws and the chuck/collet/thingie are tapered, so 3 springs on the side of the jaws should cause them to retract.

I recently got an eggbeater off of ebay and once I cleaned the gunk out, that's how it works on mine.  (a Miller Falls #5)

-sjk

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.