Recommended Posts

Posted (edited)

I have an older ridgid TP1300, and its a great planer.  I am having trouble locating knives, as its "obsolete" now.

I really love the shelix in my jointer, so I am thinking about adding one to the ridgid.  If I ignore that the shelix head in almost twice the price of the entire planer, I still have an issue - how the heck do I install it?

I looked online, but only came up with two posts where people have installed them.  Unfortunately, one was for a dewalt, and the other for a more modern ridgid planer.  The shop that sells the heads (marked up I may add) will install for 90 dollars an hour shop time.  They said it could be as little as one hour, or as long as 4 (call me a pessimist, but I assume I will be charged for 4 hours if I go this route). 

The install is intensive surgery, and I am nervous to go this route on my own.

Can anyone share their experience?

Edited by Pug
Posted

Sorry, no experience to share. I assume that if the head assembly isn't specifically designed for your machine, some field modification may be required. Personally, I can't see it as being practical, since you will have spent 2/3 the cost of a floor model planer, without gaining the advantages.

Posted

I would say tacle it yourself, also buy the head online and get it cheaper. 

Try first taking out current knifes and what not. Then reinstall it all back to the way it was. If your able to do that, then you should be good installing a new head. 

Also check out any clubs or groups in your area that are woodworking related. There maybe a member that knows this operation already as they may have done it.

Or maybe (behind closed doors) talk to one of the guys at the shop. See what he would chafge you to do the install at your house after hours. Kind of shadey but I know it works, done it with cement. The big companys waist so much at the end of the day, cleaning out the trucks. Had a driver dump left over at my place over a week and was good. Paid him directly and he pocketed it. Some may call it stealing, but the real thiefs are the ones charging absured prices. Like you said....$90 an hour is unreal.    

Posted

Can you sharpen your current rigid planer knives? I'd sooner look at a Grizzly floor planer for $1100, before spending probably 500+ on a Shelix head for a lunchbox planer. Actually can you get Grizz is the great white north?

Posted

I would say tacle it yourself, also buy the head online and get it cheaper. 

Try first taking out current knifes and what not. Then reinstall it all back to the way it was. If your able to do that, then you should be good installing a new head. 

Also check out any clubs or groups in your area that are woodworking related. There maybe a member that knows this operation already as they may have done it.

Or maybe (behind closed doors) talk to one of the guys at the shop. See what he would chafge you to do the install at your house after hours. Kind of shadey but I know it works, done it with cement. The big companys waist so much at the end of the day, cleaning out the trucks. Had a driver dump left over at my place over a week and was good. Paid him directly and he pocketed it. Some may call it stealing, but the real thiefs are the ones charging absured prices. Like you said....$90 an hour is unreal.    

7I disagree completely. Unless he is an owner you both stole from that company and he deserves to get fired. Sent from my SAMSUNG-SGH-I337 using Tapatalk
  • Like 2
Posted

Some may call it stealing, but the real thiefs are the ones charging absured prices. Like you said....$90 an hour is unreal.    

Yeah, that's because it is stealing. The "thieves" as you say, are business owners that are paying salaries, insurance overhead, repairs and a number of other things you seem to think should be free for your own use. This kind of stuff really makes me sick. 

  • Like 2
Posted

Can you sharpen your current rigid planer knives? I'd sooner look at a Grizzly floor planer for $1100, before spending probably 500+ on a Shelix head for a lunchbox planer. Actually can you get Grizz is the great white north?

we dont have griz, but its sister "craftex".  the 15" with a hh is about 2800 here.

Pug have you tried Home Depot, amazon or infinity tools?  If not, by the time you buy the byrd head, get it installed or install yourself, maybe buying a new planer would be best option. 

yes, home depot will special orde for 92 dollars per set.  i jave one fresh set in the package still, so i have some time before making a decision.

Posted

So someone who runs a shop not woodworking, who prices fair and honist. Sees the crap other shops pull.

So if a shop charges $90 and hour, and says a hour job could take four hours. That is not stealing???

Also the fact the $90 is an absured amount to be charginga  labor for anything other than something at Nasa. 

Call it what you will, but some old crrusty dude thinking he is the end all be all charging $90 an hour is the real crook. With the internet, and free market he needs to wise up or fail. 

People today don't have tons of money to be throwing around, and he should respect that. Also the owner you all defending has nothing to say about any of his employees free time after work. 

Original poster needs to save where he can, thus his asking advice. My first was to try himself and research and learn hands on. Second was asking for advice and/or help from local fellow woodworkers. Final was to work the system, as the system will always work you. This putting one in the hole. OP do what you must, and take care of yourself first.  

Posted

Having an employee in his/her off time after work doing the work outside the shop is not stealing. 

Employees are not held to some  mythical standard outside of work. Unless the situation is military in question, and that is based of contracts.  

Posted

We can get Grizzly just fine in the Great White North, however right now our dollar isn't so great so most of us are finding it hard to buy big dollar items out of the US.

I personally would not retrofit a shelix / byrd head into an old planer. I don't know how many board feet a year the OP is expecting to plane but at my hobby level of usage I'm just fine with my DeWalt 735 with knives. Taking light cuts with it I've had no problem on either birds-eye maple or curly maple. I admit I buy my other figured woods as veneers though.

  • Like 1
Posted

No, you continue to get this wrong. I am not sure what kind of morals you have, or what kind of twisted justification you have for stealing. Mythical standard... what a joke, is that your justification?

Someone working for a company, taking material (as in your concrete story) from the company and selling it to you to put cash in his pocket is stealing. He is a thief, and you are no better for it because you know what went down. 

Hiring an employee off hours to do work that the company would have done otherwise is stealing from the company.

How can you not get this through your dense skull?

  • Like 1
Posted

Guess I am dumb, guess you all are just better people than me lol.

OP will do what he needs, and if he feels ok with paying $90 and hour for four hours then that on him. But at the end of the day I don't act like a sheep. As for the cement thing, yeah guess it better that a company who racks millions just rise/dispose of left over than use it helping someone both at my point and the drivers point. As for morals, I have mre than most, but also a  realization of priorites than most. 

OP has pointed out the many of issues he faces. Cost of new head. Lack of help installing it (asking here), over priced install and shadey shop standpoint that they will prob in fact charge full four hours, etc. 

so by somes logic here, he should just not get a new head....lame. 

OP, sorry so many na sayers highjacked your thread. I gave my two cents, do what you must.  But always work the system and cover your butt. 

And good luck

Posted

You feel justified in stealing simply because a company charges more than you think they should. Yet you stand by the falsehood that you have more morals than most. In what world is stealing considered to be good advice? 

  • Like 2
Posted

At what point did I say he should steal?

I spoke of a time I worked the system. 

And suggested he could higher a trained person outside their day job to do the work. As that person is not oblagacted to only doing his/her work at the shop. No different than a mechanic doing car work for people after leavl his day job at a shop! And seeing how that was my 3rd option, you seem to be disreguarding my first two. Learning it himself by doing, IE self improvment. And networking with locals who have the same interest.  

But rather than see those, you wish to hijack a thread as a high and mighty who needs to point fingers. Hate all you like, I think it is funny. You get all butt hurt over someone who is not raped by a system in place to rape people. I bet your one of those persons who has featool tools, and looks down on anyone else who doesn't jump on the band wagon.

The man (Pug/OP) asked for advice, in upgrading a tool. Seeing how he is thinking that route he prob can't afford a new machine. Yet everyones (not really) suggestion has been get a new machine for more than the cost of a head. Or flame at me like some internet nazis lol. You live your life, I will live mine :)   

At least I feel Pugs pain in cost of things, and  sympathize. 

Posted

That guy used his employers truck without permission. They have to pay for the truck, the maintenance, the insurance and the depreciation. Was this guy on the clock? If so they were paying for his time too. He also collected money for something that did not belong to him. That is stealing. Even if the material was going to go to waste the owner would not approve because it's product going out into the marketplace and they are collecting no revenue on it. I am leaving it at that because it's not worth it to go on. Good luck to the op with the planner. I would see a Shelix head in that thing as investing too heavily in it. What if the obsolete motor burns out in a year? Sent from my SAMSUNG-SGH-I337 using Tapatalk

Posted

Llama, there are two competing concepts here that conflict. I was never forbidden to ply my trade in my off hours. The company had enough work that we would have sneezed at the small scope of this work. I would not beg an employee to violate a contract, but I have seen employees who knew what their company would do and not do. Sometimes the $90 shop hour charge is a message that "we are too busy or just don't want to do this." Having said this, I think 90% of the time (made up stat, just opinion) you are likely correct and the employee is violating a contract for personal gain. If anyone gets to that place just beware. With regard to the concrete, I have seen that prosecuted. The only people companies like to let have the leftover is the original person who paid. As soon as the driver delivers to a separate address he opens himself up to lawsuit or charges. On the other hand, the closer they are to management the more freedom they sometimes have to protect accounts by trading favors. This makes this whole end of the thread tricky. In formal business it is all wrong. In family business it might be ok. Just beware. 

  • Like 1
Posted

Pug, you should look at the Powertec planer blades, available on amazon (Canada). I bought a set for my DW734 and they seem to be at least as good as the stock knives at almost half the cost. I looked, and there seems to be a listing for your planer at less than $30 CAD.

It's listed under POWERTEC 128070 13-Inch HSS Planer Knives for Ridgid TP1300, Set of 2

Just got a set of these knives for my jointer and they seem to be doing alright.

Posted

$90 an hour can be perfectly reasonable.  Only a small portion of these charges goes to salary, then there are benefits, overhead and so on.  The purchasing, recieving, shipping, accounting and so on don't exactly get to bill hours to customers very often yet they seem to like being paid.

Moonlighting would stike me as OK in general though.

Posted

I think steve way up there above the moral high ground debate had a good and valid point that shouldn't be looked over. Check out infinity for other blades that match your current ones.  My jointer had a weird non standard sized l sized blade. I found some on there that matched perfectly. They were not specified for my machine. 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Who's Online   1 Member, 0 Anonymous, 53 Guests (See full list)

  • Forum Statistics

    32.1k
    Total Topics
    437.6k
    Total Posts
  • Member Statistics

    26,008
    Total Members
    3,644
    Most Online
    Bob44
    Newest Member
    Bob44
    Joined