Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Wet/dry sandpaper - lubrication?

Featured Replies

  • Popular Post

I'm in the middle of finishing a bench.  Pretty much three slabs of walnut.  I have two coats of Waterlox on it and I want to sand in between coats to build up a finish coat and to make it baby bottom smooth.  I pulled out some 600 grit wet/dry paper but it clogs up after a few passes.  I'm thinking I need some sort of lubricant on it but I'm not sure what to use.  If I wanted to do a wipe on finish, I could probably use the Waterlox itself and then simply wipe it away, but as I want to build up a few coats, that won't work.  

Also, what's the best rag to wipe off the dust?

Any suggestions on what to use would be greatly appreciated.

Thanks,

Allan

IMG_2993.JPG

IMG_2994.JPG

Allan, I'd be the last person to offer you finishing advice on YP, much less a piece that nice! Great looking bench and welcome to the forum. I'm sure the advice you're looking for is soon to follow.

That's a beautiful bench.  

What are you seeing now that you dislike?  I've found walnut to need a few coats before it really fills in the major divots giving a smoother look.  On the other end of that,  too much and it starts looking like plastic. 

I'm not sure if it's right or not but I've used windex as a sanding lubricant under wet dry paper. 

I have heard that a little spray bottle with a mixture of dish soap and water is a good lubricant for use with wet dry sandpaper.

I'm I thinking 600 grit is a bit much but that is just my thought..Bench looks great..

Great looking bench Allan! Is it possible the finish is not fully cured? That is the first thing that comes to my mind. When the finish is not fully cured it gums up the paper. I dont think a lube is needed to sand finish between coats.

Sent from my SM-N910W8 using Tapatalk

I would use 320 grit and very small amounts of mineral spirits as a lube. Make damn sure the Waterlox is fully cured. It can take a long time for Waterlox to cure, especially 2nd and 3rd coats. I have had coats take weeks to fully cure in cold and damp weather.

I would wipe with clean soft cotton T-shirt type cloth rags. I will wipe the first signs of loading off the 320 grit with a non-woven gray abrasive pad (like a Scotch brite). If it has to be every other stroke then that's what you do, but that's probably a good sign the finish hasn't cured yet. Waterlox does not  cure extremely hard, this probably is why the finish holds up in exterior conditions.

Beautiful Walnut bench !  

Be patient, since you are this far into using Waterlox  trying to get in a hurry will result in disaster.

If your paper is clogging, your finish is not dry enough. Your finish should powder up or be dusty when dry enough to sand. At 2 coats, I wouldn't be sanding. You need to build up a few coats first. You need to have enough finish on the wood to sand. Sanding removes finish layers you have already put down. Get a third coat on and let it dry a few days. Use 320 grit foam backed paper. Sanding is a light wipe and stay off any edges. The goal is just to knock down any high spots. I would use compressed air to blow the finish off or vacuum. You can take a damp soft cloth, more dry than wet with mineral spirits to wipe off any remaining dust. Let the mineral sprits have time to flash off before applying more finish. You may have to repeat this a second or third time. Then your finish will flow out and be nice and smooth. You'll know when your done.

 

Just make sure between coats you give a few days to dry nice. Fully cured with Waterlox is about 90 days. So light use on the bench after a full week of drying.

 

-Ace-   

1 hour ago, Woodenskye said:

I have heard that a little spray bottle with a mixture of dish soap and water is a good lubricant for use with wet dry sandpaper.

I unfortunately do more wet sanding than I care to think about :unsure:..  I use dish soap (specifically Dawn) mixed until the water is slightly blue (I use the blue dawn)..

 IMO 600 is a bit too fine, personally I would not go above 400 depending on the brand paper.  Some 400 is actually more coarse than 320...  

Ive not used waterlox, but if it's gumming that quickly it may need more time to dry.  Beautiful bench btw!!

Allan, can you give us a front view of the bench?

  • Author

Wow!  Thanks to all who replied.  Truly appreciate the compliments on the bench. Totally unexpected.

K Cooper, I'll take a pic tonight and post it.

I think I'm going to go back to 320 or 400 'regular' paper and see what that does.  It just felt very dusty and not smooth and I thought that a much finer grit would be the ticket for in between coats.

Ace, I'll take your advice and rag it off with an old cotton sheet I brought downstairs for just that purpose. 

Again, my thanks.  What a great community.

  • Author
  • Popular Post
22 hours ago, K Cooper said:

Allan, can you give us a front view of the bench?

The three square recesses on the side panels will eventually be filled with mother of pearl.
Thanks again for the kind words.  I'll post on the Guild site a link to a Pinterest board where I hope to document the whole build.  It was the most technically challenging thing I've ever built.  I adapted Nick Offerman's slab leveling jig to curve the sides.   Whoo boy!  What fun that was.   Stay tuned.

FYI - the sides started out with 16/4 slabs.  Not the cheapest project I've built, that's for sure.  But the divorce papers never went through so we're good.  :lol:

Edit: I just noticed that the front view is exaggerated a bit.  The sides are not that tilted toward the outside.  So much for a phone camera.

IMG_3008.JPG

IMG_3009.JPG

That bench looks great.

I dont have any wet sand advice but I am curious if you resawed that walnut on your wooden bandsaw that I see in the background?

How bout a few pics of that? I have read articles of people making shop tools (jointer ect) out of ply wood but have never seen a bandsaw!

  • Author

Thanks, Alan. Yes, that is a wooden bandsaw in the background. I inherited it from a cousin when he passed. I think there were kits or plans sold in the '50s or '60s from which he built it. It's really a pretty crappy tool to tell you the truth. Haha. 

The sides were actually routed with an Offerman slab flattening jig I modified for the appropriate curves.  As the width of the sides are 20", I'd have to have one honking saw to do that  ?

Pictures below. I can't wait to buy a real band saw. 

image.jpeg

image.jpeg

image.jpeg

Crappy tool or not that band saw is pretty sweet! Thanks for the pics!

  • Author

Gents, as a follow up, I put one more full coat of Waterlox on, let it dry, and the followed up with a very light coat with which I used 600 grit wet/dry paper and used the Waterlox as the lubricant.  The bench is now wonderfully smooth the way I wanted it. So, sand to 220. Apply finish coats. Use final coat as lubricant and wipe off like Danish oil.  

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.