Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Wood hinge boxes

Featured Replies

  • Popular Post

Got some shop time today. I wanted to make my dad a coffee table for fathers day but with little time I get in the shop there is no way I can get it done in a week. So i settled on a cute little box. I decided to make a bunch while Im at it. I will give one to my kids as well.

I got in the shop before lunch and grabbed a piece of ply and drew up a simple full scale drawing and some wood combos and a cut list

8e82104d1bf74d3e3ba1ae8f5a5c9a15.jpg

Here are all the parts milled up almost ready for dovetails

6929f43c78a62dd4eb1c1933084c00bf.jpg

1c2d480841c44f30220d3bc74e60e921.jpg

Made a bunch of dowel that will be cut up for wood hinges. Maple, h. Mahongany, walnut and cherry

404b375ff64cd2bd8bc7d447998a9b2e.jpg

I dialed in every part to perfection on the shooting board

0c9ddb61987125171c126dae9fc28822.jpg

bfc367d62e74e06cd030c7807634cde1.jpg

Did a poplar test box

85dc413d30d54c028bc619124b71890d.jpg

e596c2481d0aba0c44634bc944c87ac5.jpg

Dovetailed all the boxes

1d6cf50d988e294dc2d039c78f2f9272.jpg

1f72a48a124ecfc1405f1cb34407b345.jpg

3a7a3b3963799febb6f153d8c05b6b76.jpg

eef0bf23299472368ec16e1ae262e14b.jpg

f85e141fd907057bcfed2466ff1b78cd.jpg

The design is as simple as it gets. I'm doing this to try out the wood hinge so that is my focus more than a fancy box design.

Bottoms will be ply with some sort of decorative paper.

Thanks for looking!

Sent from my SM-N910W8 using Tapatalk

  • Replies 61
  • Views 11.5k
  • Created
  • Last Reply

Top Posters In This Topic

Most Popular Posts

  • shaneymack
    shaneymack

    Got some shop time today. I wanted to make my dad a coffee table for fathers day but with little time I get in the shop there is no way I can get it done in a week. So i settled on a cute little box.

  • shaneymack
    shaneymack

    Got a good amount done today for the limited time I had. I started by setting up a straight bit in the router table and making all the stopped grooves for the bottoms Next i made a jig

  • shaneymack
    shaneymack

    Got two boxes complete today. A final sanding and some finish left. Front Side I did a better job on the hinge on these. I made sure to make the grain continuou

Posted Images

Dang dud, Henry Ford would have been proud of you for batching those out! With that many dt's, surely not hand cut?

  • Popular Post
2 hours ago, shaneymack said:

I wanted to make my dad a coffee table for fathers day but with little time I get in the shop there is no way I can get it done in a week.

I call BS!  Shane's account got hacked!  Who are you imposter?  Shane could knock out a coffee table in 2 days, max.

 

(Nice boxes btw)

  • Author
Dang dud, Henry Ford would have been proud of you for batching those out! With that many dt's, surely not hand cut?

No not handcut. I used the Leigh d4r pro. Its a lot easier to do them hand cut, just a lot slower. The more I use that jig, the more I realise I hate it with all my being.

Sent from my SM-N910W8 using Tapatalk

Nice bunch of boxes so far Shane.  Am I seeing right, you use you Low Angle Jack on you shooting board?

Thanks Chet. Yes im using the low angle jack. Hopefully that will change on fathers day.....

Sent from my SM-N910W8 using Tapatalk

I call BS!  Shane's account got hacked!  Who are you imposter?  Shane could knock out a coffee table in 2 days, max.

 

(Nice boxes btw)

Haha, thanks Steve! Actually i probably could bang out a decect coffee table in a couple days but not the design I want to build for him. It has bent laminated aprons and a curved drawer within apron so i wouldn't want to be rushed to do it. He will have to enjoy this little box untill I can get around to it :)

Sent from my SM-N910W8 using Tapatalk

Looking good so far, Shane! Let's see those hinges!

 

Thanks Daniel !

Sent from my SM-N910W8 using Tapatalk

The boxes look great, but you can't leave this hanging...

1 hour ago, shaneymack said:

The more I use that jig, the more I realise I hate it with all my being.

Why?  My only problem with it is the repeated learning curve.  I have to go through the manual every time for setup.

1 hour ago, shaneymack said:

The more I use that jig, the more I realise I hate it with all my being.

i don't disagree with you much on anything shane but i really like mine, dovetails, box joints, sliding dovetails, half blind dovetails are all a breeze on mine, i use it all the time. i will say i haven't had the courage (or time) to try hand cut dovetails, maybe this winter

  • Author

The boxes look great, but you can't leave this hanging...

Why?  My only problem with it is the repeated learning curve.  I have to go through the manual every time for setup.

I just think it is way easier to screw something up with this jig than with hand cut. This jig gives you nothing over hand cut except speed. And the speed ONLY comes if you are batching out the exact same size drawer over and over and IF you have dedicated routers for all the bits that stay set up. Its so damn finicky, I really hate it. Its just that I feel im so invested in it i keep going back to it. Something always goes wrong for me no matter how dilligent i am at reading the manual over and over again. Most often i am cutting asymmetric dovetails which requires more brain power. If i were doing them by hand there is little brain power, layout amd cut. Obviously other things come into play with handcut but the process is so much more pleasant. I used to only cut half blind and through by hand untill I got this thing and I keep thinking of going back. Or a combo of bandsaw and chisels. I dont know. I keep thinking i just need more time in the saddle with it but the more I use it the more i dislike it.

Sent from my SM-N910W8 using Tapatalk

i don't disagree with you much on anything shane but i really like mine, dovetails, box joints, sliding dovetails, half blind dovetails are all a breeze on mine, i use it all the time. i will say i haven't had the courage (or time) to try hand cut dovetails, maybe this winter

I hear ya Dave. Maybe I just need to practise a lot more with it. It could totally be that im just not very good with it because lots of people like it. It seems i always get some weird problem that i cant figure out. Yesterday I was cutting asymmetric dovetails and the dovetails all came out great on the first two boxes. Then when i got to the birdseye tails it went bad. Cutting my B And D Sides on the left side of the jig was fine. When i did my A amd C sides on the right side i had one tail too tight amd one tail too loose !! How the @$#*/£= does that happen !! I never figured out the problem. I re did the parts without the vrs and they came out great. I was covered in dust but the parts were good =).

Sent from my SM-N910W8 using Tapatalk

i agree with you shane, asymmetric dovetails do take more thought, but look at your result on those beautiful boxes. i doubt that you could have done them all by hand in the time you had available to do them. i have used mine a lot and i only have one router for the job so i have to set it up every time, i get faster with it every time i use it

  • Author

i agree with you shane, asymmetric dovetails do take more thought, but look at your result on those beautiful boxes. i doubt that you could have done them all by hand in the time you had available to do them. i have used mine a lot and i only have one router for the job so i have to set it up every time, i get faster with it every time i use it

You are probably right Dave. Im still annoyed from yesterday lol. I have been using tools for a long time and most tools i just use and dont think about. When there is something wrong i just tune it up and keep on going. It seems like with this jig I am always on edge and double and triple checking everything. I normally don't have to put much thought into using tools so it really messes with my usual workflow.

Sent from my SM-N910W8 using Tapatalk

i've had the same thing happen to me, i believe it was due to the bit slipping in the collet, my only complaint about that jig is the 1/2" to 8mm adapter, it sucks. a friend bought a 8mm collet for his PC and no problems.

  • Author

i've had the same thing happen to me, i believe it was due to the bit slipping in the collet, my only complaint about that jig is the 1/2" to 8mm adapter, it sucks. a friend bought a 8mm collet for his PC and no problems.

Please explain more this bit slipping in the collet and why it would cause my problem. Speak slowly, im Canadian.

Sent from my SM-N910W8 using Tapatalk

not a Canadian thing Shane, it's a wood worker thing, my problem was the bit slipped down causing a loose joint. when i do asymmetrical joints i use a marking knife to transfer finger positions from left to right. maybe this was your issue, maybe not

  • Author
not a Canadian thing Shane, it's a wood worker thing, my problem was the bit slipped down causing a loose joint. when i do asymmetrical joints i use a marking knife to transfer finger positions from left to right. maybe this was your issue, maybe not

Interesting. I don't think that is the issue. The router i had the dovetail bit in had the actual 8mm collet in it. The router with the straight bit had the collet adapter. It bizarre because all I did was remove the vrs and the second pieces came out fine which doesnt make sense to me.

Sent from my SM-N910W8 using Tapatalk

43 minutes ago, shaneymack said:

It bizarre because all I did was remove the vrs and the second pieces came out fine which doesnt make sense to me.

you're right Shane that dosent seem right, have to think on that one a bit

  • Author
Shane the boxes look great, I can't wait to see the hinges! I get what you're saying about that coffee table design, glue only dries so fast. Oh, and did you realise that your shooting board is backwards? ?

Thanks Ross! Yup im a lefty, but a weird one. I use a hand plane right and use a shooting board left. Come to think of it, I'm pretty ambidextrous when it comes to woodworking.

Sent from my SM-N910W8 using Tapatalk

Just now, shaneymack said:

Thanks Ross! Yup im a lefty, but a weird one. I use a hand plane right and use a shooting board left. Come to think of it, I'm pretty ambidextrous when it comes to woodworking.

Sent from my SM-N910W8 using Tapatalk

So am I. I have two left hands though.

 

4 hours ago, shaneymack said:

Thanks Chet. Yes im using the low angle jack. Hopefully that will change on fathers day.....

What will the improvement be? A finer cut? Or just the efficiency of not using a plane for 2 different tasks?

 

37 minutes ago, treeslayer said:

It bizarre because all I did was remove the vrs and the second pieces came out fine which doesnt make sense to me.

hey Shane, if the depth was ok i would suspect that you rotated the router a bit, the guide bushing is elliptical and if you rotate the router, i.e. don't keep it square to the jig, your cut will be off

  • Author
 

hey Shane, if the depth was ok i would suspect that you rotated the router a bit, the guide bushing is elliptical and if you rotate the router, i.e. don't keep it square to the jig, your cut will be off

Nope not that either. That is my focus when im routing, keeping the router at 12 o'clock.

Sent from my SM-N910W8 using Tapatalk

What will the improvement be? A finer cut? Or just the efficiency of not using a plane for 2 different tasks?

I guess ill have to wait untill fathers day to see..

Sent from my SM-N910W8 using Tapatalk

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.