Immortan D Posted September 8, 2016 Report Posted September 8, 2016 Just now, shaneymack said: Now your just getting a little crazy. Lol Sent from my SM-N910W8 using Tapatalk Not really. The technology to do things like that is now ready available and cheap. 1 Quote
MisterDrow Posted September 8, 2016 Report Posted September 8, 2016 Very cool! This is one of those things that comes up where I wish I had WAY more disposable income... Quote
Pwk5017 Posted September 8, 2016 Report Posted September 8, 2016 I wonder if you can bump the motor up to 2.3hp like the lathe motor. If you convert the lathe 1.75hp to 220v you gain another .5hp. 2hp drill press is pretty boss. Quote
mkrusen Posted September 8, 2016 Report Posted September 8, 2016 Its a very cool machine for sure. Does seem oddly low to the ground though. I'm only 5'6" and that still seems a little short. Quote
21meyer Posted February 24, 2017 Report Posted February 24, 2017 On 9/7/2016 at 6:11 PM, shaneymack said: The last tool in the shop to get excited about is the drillpress. This one has got me excited. This is the drillpress i will purchase once available ! What do you gugs think? Cool or too gadgety/ gimmicky ? Sent from my SM-N910W8 using Tapatalk Shane, just curious if you ever pulled the trigger on this DP - or any other forum member for that matter? If so, what are your thoughts? The online reviews are very limited. I see it is now on sale at several different vendors. Thanks, Cody Quote
Tom King Posted February 26, 2017 Report Posted February 26, 2017 Important things to me for a drill press: no runout depth stop easy to adjust, and doesn't move even after a several hundred repetition operation-one of my favorite things about the 1150 heavy-heavy is good for a drill press table is easy to move up and down, sideways, and tilt will last, troublefree for 61 years at least like mine has-don't see that happening with electronics Ease of speed change is way down the list. I'll change the speed on mine if we're doing some long run, but the last time I remember changing the speed on mine was 2009. The rest of the time, I'll adjust my feed rate to suit anything from a tiny drill bit to a 4" holesaw for one or a few holes. 2 Quote
Pondhockey Posted February 27, 2017 Report Posted February 27, 2017 Right now I'm using a shop made drill guide (that might be a little pretentious - it's a jointed/planed block with a corner cut out by a band saw - the corner is the drill guide.) There's a trade-off between accuracy (thickness of the block) and length of bit. An HF drill press might be an upgrade. I'm waiting to pull the trigger until some project forces the issue. So it's fun to hear the pros and cons (and all about Richard's love life!) Quote
TerryMcK Posted February 27, 2017 Report Posted February 27, 2017 I must have missed the original posting. I like it. It's also got some green on it to please you Shane. 1 Quote
wdwerker Posted February 27, 2017 Report Posted February 27, 2017 I would hold out for a minimum 10 year warranty! ! Anything with a computer in it has a finite life or a high repair bill. Then would they even be in business when it broke ? Quote
shaneymack Posted February 27, 2017 Author Report Posted February 27, 2017 Shane, just curious if you ever pulled the trigger on this DP - or any other forum member for that matter? If so, what are your thoughts? The online reviews are very limited. I see it is now on sale at several different vendors. Thanks, Cody I have not yet bought it. Its taken the back seat to a lot of other stuff. I'm pretty sure this is the one I'd buy though. Right now I just have a bench top drill pres ls that does ok. Sent from my SM-N910W8 using Tapatalk Quote
21meyer Posted February 27, 2017 Report Posted February 27, 2017 I have not yet bought it. Its taken the back seat to a lot of other stuff. I'm pretty sure this is the one I'd buy though. Right now I just have a bench top drill pres ls that does ok. Sent from my SM-N910W8 using Tapatalk Yeah, if I remember correctly, we have the same Steel City bench top model. I have been very happy with it but have run into several instances recently where I need more quill travel and distance vertically. Quote
Marmotjr Posted February 27, 2017 Report Posted February 27, 2017 9 hours ago, wdwerker said: I would hold out for a minimum 10 year warranty! ! Anything with a computer in it has a finite life or a high repair bill. Then would they even be in business when it broke ? In days past, this would be more of a concern, but with the recent steep drop in micro controller pricing, I think getting a replacement board would be a lot easier than you'd think. But that said, they know their market probably doesn't want to go programming an Arduino themselves, so I'm also hoping they'd have enough of a warranty to cover it. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.