Llama Posted September 8, 2016 Report Posted September 8, 2016 15 minutes ago, RichardA said: Sir, would be more appropriate ! Sir Dad? Quote
Rex Edgar Posted September 8, 2016 Report Posted September 8, 2016 18 hours ago, Woodenskye said: Shane will buy this for me! I will take all responsibility for building the base to raise it up. Becareful Rex, when Richard says he will throw you to the wolves, he ain't blowin smoke. Deleted Quote
RichardA Posted September 8, 2016 Report Posted September 8, 2016 Just now, Llama said: Sir Dad? That would work, If I could just remember Mom's name! Quote
Cliff Posted September 8, 2016 Report Posted September 8, 2016 I only watched a couple of minutes but I'm sold. That is exactly the sort of innovations that should be occuring in my tools. Too bad a drill press is almost dead last in my upgrade path. Quote
Rex Edgar Posted September 8, 2016 Report Posted September 8, 2016 Good night. Dick. Which show was that? Smothers Brothers? Showing your age if you answer here, G'nite, all. Quote
shaneymack Posted September 8, 2016 Author Report Posted September 8, 2016 12 minutes ago, TIODS said: Only a hundred bucks more than the PM without the features so, it's priced reasonably. Exactly what I was thinking, Kev. And here in Canadia, the PM is like 1899$ so im pretty sure that the Nova will be right around the same price. 2 minutes ago, Rex Edgar said: Good night. Dick. Which show was that? Smothers Brothers? Showing your age if you answer here, G'nite, all. Ok go to bed all ready !! LOL I should be more respectful of my elders shouldnt I 1 Quote
Rex Edgar Posted September 8, 2016 Report Posted September 8, 2016 2 minutes ago, shaneymack said: Exactly what I was thinking, Kev. And here in Canadia, the PM is like 1899$ so im pretty sure that the Nova will be right around the same price. Ok go to bed all ready !! LOL Early to bed, early to rise......... Oh that's right in Canada there is no Ben Franklin! Quote
shaneymack Posted September 8, 2016 Author Report Posted September 8, 2016 2 minutes ago, Rex Edgar said: Early to bed, early to rise......... Oh that's right in Canada there is no Ben Franklin! Ben who? He on youtube? 1 Quote
RichardA Posted September 8, 2016 Report Posted September 8, 2016 I just watched that video again, two things came to mind... The head of the drill press is chest height if that guy is 5'10" on me. And I think I'd like to see t-tracks on both the table and on the base, for long stock and clamping. 7 minutes ago, shaneymack said: Exactly what I was thinking, Kev. And here in Canadia, the PM is like 1899$ so im pretty sure that the Nova will be right around the same price. Ok go to bed all ready !! LOL I should be more respectful of my elders shouldnt I Treat me with respect, and you gain what you give. 13 minutes ago, Rex Edgar said: At his age it's called'blowing dust'. That's it all the old timer sex or non sex innuendos for one night. Sleep tight , Richard! In my back yard! Quote
JosephThomas Posted September 8, 2016 Report Posted September 8, 2016 Only a hundred bucks more than the PM without the features so, it's priced reasonably. Is Nova known to be that level of quality? I have never owned their stuff, although I'm considering one of their lathes. Sent from my Nexus 5 using Tapatalk Quote
..Kev Posted September 8, 2016 Report Posted September 8, 2016 2 minutes ago, JosephThomas said: Is Nova known to be that level of quality? I have never owned their stuff, although I'm considering one of their lathes. Sent from my Nexus 5 using Tapatalk With their lathe's, yes. PM also thinks a little too highly of their stuff as well. Quote
Coop Posted September 8, 2016 Report Posted September 8, 2016 1 hour ago, RichardA said: There are many guys well past my age getting busted for sex crimes..... Mine still works and still make both my wife and me smile. Plus, a spinning chunk would hurt ! sounds like Jack and coke talking! 54 minutes ago, Rex Edgar said: Richard, That was eight years ago, Really, that's the best you got? And his wife tells me he's still stuck in that position! Sorry Shane for adding to your hj! Quote
Gixxerjoe04 Posted September 8, 2016 Report Posted September 8, 2016 2 hours ago, shaneymack said: Really? You think it's too short? I'm 6'3" and that would suck for me as well. Guess i gotta go see one. Sent from my SM-N910W8 using Tapatalk Ya I thought about that also. I have a nova dealer here so not too big a deal. Sent from my SM-N910W8 using Tapatalk Well 6'3" Canadian is like 4'11" in the US height scale correct Looks pretty awesome, my $40 harbor freight drill press will have to do for now. 1 Quote
Pwk5017 Posted September 8, 2016 Report Posted September 8, 2016 I dont think the video covered it, but what is the distance from post to chuck center? Looks like 15" max. I dig the variable speed and the depth stop. I have their DVR XP lathe and find it to be pretty nice. Certainly the best lathe in that price range--my opinion. You start to spend $5,000+ once you get over that point. For a novice turner, speed control is pretty important. With the drill press, I simply dont find a need to change RPMs that often. My 1960s delta is stuck on one unknown speed and i drill well with 1/8" brad points and 1.5" forstners. Could things be better with more RPM control? Maybe. Still, I get clean, accurate holes with no burning. Hard to go wrong with a 15-20" vintage PM or Clausing. They will be 1/3rd the price of the Nova, and drill the same holes. That is what I will upgrade to when I feel the need. Unless you are working metal(get a mill), I dont see why people would spend over $500 on a drill press. Quote
rodger. Posted September 8, 2016 Report Posted September 8, 2016 Looks pretty cool! Did they neglect to add a DC feature? Quote
bleedinblue Posted September 8, 2016 Report Posted September 8, 2016 No integrated dust and chip removal? Pshhh. No thanks! I actually think $1500 is very reasonable for this. Watching the video I expected quite a bit more. Quote
prov163 Posted September 8, 2016 Report Posted September 8, 2016 It's a very cool tool and being a geek I love the technology. That said, I can't see myself spending $1500 for a tool I don't use all that often. Quote
JosephThomas Posted September 8, 2016 Report Posted September 8, 2016 Well, I expect good reviews from all you guys, so I can refer to them somewhere down the line...far down the line most likely Quote
difalkner Posted September 8, 2016 Report Posted September 8, 2016 I don't think $1,500 is too high for an 18" drill press with 1.75 HP motor and all the bells and whistles that go along with it, but if I were to spend that much I'd rather get a Grizzly G0704 mill and save a few hundred. I have a decent drill press but what I need just as often is a mill and the Nova is so close to that it would be like almost getting a mill but still having 'just' a drill press. Quote
-MattK- Posted September 8, 2016 Report Posted September 8, 2016 Looks great, I'd trade my Powermatic DP for that. Quote
Llama Posted September 8, 2016 Report Posted September 8, 2016 If I were in the market for a $1500 drill press, this would be at the top of the list. Looks like a nice thing. We'll see how real world reviews go after people start beating it up. Quote
gee-dub Posted September 8, 2016 Report Posted September 8, 2016 From the web page (which still states pre-production models available at a discount): Product Technical Specification: 1.75HP Direct Drive, Variable Speed DVR Motor Class F Winding Insulation. Industrial spec for long life Swing: 18” Spindle Travel: 6” Number of Spindle Speeds: Variable Speed Range: 50-3000rpm is default (option in settings to increase to 5500rpm) Spindle Taper: MT-2 Spindle Distance to Table: (Max.) 23 1/8” (587mm) Spindle Distance to Base: 40.94” (1040mm) Table Size (wood working)(L x W): 16 1/2" x 16.1/2” (419mm x 419mm) Table Tilt (Deg.): -45° to +45° Table Rotation (Deg.): 360° Chuck Size: 5/8” (3-16mm) Column Diameter: 3.62” (92mm) Base Size (L x W): 22 1/4” x 17 1/2" (565mm x 445mm) Motor Power: 1.75HP (1250W) Motor Voltage (V.): 115/230 Single phase input Motor Current (Max.) (Amps): 15/10 At least one person has posted a review of the pre-production model and it was mostly positive. Things mentioned were much as were guessed at here. Height is a bit low (I elevated my Delta by about 5"). Low speed is great; so many DP's only go down to about 250 RPM. Split head allows horizontal slop control; vertical slop still present. Vertical slop may not be such an issue with a heavy quill assembly but I am always fascinated that with all our modern advances it is so universally present. I have yet to see a current DP under $2000 that is a tight and smooth as Grandpa's 14" Delta DP-200 but, I digress ;-) Power is reported as very good probably due to the torque feedback controlled motor feature. Spindle to table maximum is a bit shy but, I have never used the full span on mine. I generally drill on the table or swing the table out of the way for a post-like material. Warranty is mentioned in the review as 2 years on electronics and 5 years on everything else. The table is very standard and allows no forward (or even tooless) tilt. However, this could be the DP I have been waiting for. I will wait a bit longer and see how things play out but, this will set the bar higher if the long-term quality is there. I have no reason to think that it is not reading Nova lathe reviews that use the same basic technology. Pretty exciting. Quote
Immortan D Posted September 8, 2016 Report Posted September 8, 2016 I think the drill press is cool but it fell short of current technology. Navigating all those bit type and size menus will be annoying. A "bit scanner" of sorts could be built into the machine, that "automagically" recognizes bit type and size upon a single button push and prompts the user only for confirmation. 2 Quote
shaneymack Posted September 8, 2016 Author Report Posted September 8, 2016 I think the drill press is cool but it fell short of current technology. Navigating all those bit type and size menus will be annoying. A "bit scanner" of sorts could be built into the machine, that "automagically" recognizes bit type and size upon a single button push and prompts the user only for confirmation. Now your just getting a little crazy. Lol Sent from my SM-N910W8 using Tapatalk Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.