Recommended Posts

Posted

So I'm about to purchase my first planer. I am very new to woodworking but have been quickly accumulating tools for my shop(unfinished basement) .My next purchase will be a benchtop planer. I was thinking about going with a wen 15 amp 3 blade. am i making a mistake. My budget is really tight(pretty much nonexistent).I was strongly considering going with the benchtop delta but like i said, no dinero. 

Posted

Dw735 by Dewalt is the best bench top planer around. Spend the little more upfront and you won't need to upgrade when that wen craps out in a year. Look for a used one if the price is an issue. Many folks here have the same machine and will vouch for it 

  • Like 2
Posted
2 hours ago, byegge said:

Dw735 by Dewalt is the best bench top planer around. Spend the little more upfront and you won't need to upgrade when that wen craps out in a year. Look for a used one if the price is an issue. Many folks here have the same machine and will vouch for it 

Price is relative. The dw735, with infeed and outfeed tables, goes for $619 on Amazon. The Wen planer is $240. That is a nearly $400 difference and 2.5x the cost. I'd hope the dewalt is a lot better, but does that mean the Wen can't get someone up a running? I'm more with bleedinBlu, you can get started with one of the smaller units. I use the Makita. Planer, which falls somewhere in between. One advantage of the smaller units is their lighter weight makes them easier to move around and store, which can help in a limited basement shop (which I have).

  • Like 1
Posted

I had never heard of the brand but just a quick look around the internet and it looks like it gets strong reviews.  So for starting out and for $240.00 seems like it might be a good start.

And welcome to the forums.

  • Like 1
Posted

The 735x is only $500 on amazon if you don't mind waiting a bit.  And it's Prime shipping.  It's more expensive through other sellers.   I just ordered mine tonight.   I figured the price makes it worth the few week wait.  Look up 735x, and then find the "other sellers" category.  It's listed there. 

I was in the same boat as the OP.  Looking for a planer, and was looking at the <$300 range.   But after asking here, and reading multiple other reviews, I decided the 735 was the way to go.  The extra cost upfront was worth it, IMO, to save against headaches later on. 

Posted

I got a refurbished Porter Cable via Amazon for $250 about a year ago. The thing has easily taken everything I threw at it without issue. It's got a tendency to snipe the first and last 1.5 inches of the board but with proper infeed and outfeed support it's pretty much a non-issue. Eventually I'll upgrade and get the 735 but until then, keeping a sharp set of knives in my PC seems to do just fine.

I will say, though, that while it's no DW735, having a planer in the shop was a big game changer for me. It's incredibly nice to be able to dimension wood so easily. Hell, I'll probably still use it after I get my DW for more rough thicknessing or for woods like pine so that I don't have to gum up my fancy one. :D 

And welcome to the forums!

  • Like 1
Posted

Welcome to the forums!

Completely OT: When I saw the topic "wen planer," the first thought that flashed through my head was, OUCH! A wen is also known as a skin cyst. Imagine planing this sucker off:

C0225514-Sebaceous_cyst_on_the_face-SPL.

 

  • Like 1
Posted
Welcome to the forums!

Completely OT: When I saw the topic "wen planer," the first thought that flashed through my head was, OUCH! A wen is also known as a skin cyst. Imagine planing this sucker off:

C0225514-Sebaceous_cyst_on_the_face-SPL.jpg

 

I think the proper procedure would be paring it off with a nice sharp chisel. Lol

Sent from my SM-N910W8 using Tapatalk

  • Like 2
Posted
On 12/29/2016 at 10:34 PM, byegge said:

Dw735 by Dewalt is the best bench top planer around. Spend the little more upfront and you won't need to upgrade when that wen craps out in a year. Look for a used one if the price is an issue. Many folks here have the same machine and will vouch for it 

Ha,ha.... Yea I used to have a Dewalt 735 and to be honest I think they're over rated. You plane with it for a while and you find that the whole inside cavity gets full of saw dust. And you can't hook up the dewalt735 to a normal roll around shop vac. cause it will burn it up. Dewalt 735 to me is more trouble than it's worth. Sure it's in a lot of ways user friendly but in a lot of ways it's not. I got in a bind a number of months ago and I end up having to pawn my planer. Well I got to a place were I couldn't get it out and I lost it. We this last summer I had big cabinet job. I needed to buy a planer. The wen was the cheapest and most affordable on the market. So I bought one, it came with a granite base/table. And I can hook it up to my vac. It does great. I recommend this product to anyone. Just like any thing if you take care of it, it will last you a while.

Posted

I think WEN is a company that just takes product from some chinese maker and brands it.   I see their products occasionally at the local Menards, at least until Menards goes direct and now they're badged Performax, Masterforce or Tool Shop.

The one question I would clarify before buying it is if you can find replacement knives.   Are these the same as used in any other 12.5" planer and readily available?

Otherwise it's probably not much different from the other benchtop planers in that under $300 space.

Posted
I think WEN is a company that just takes product from some chinese maker and brands it.   I see their products occasionally at the local Menards, at least until Menards goes direct and now they're badged Performax, Masterforce or Tool Shop.

The one question I would clarify before buying it is if you can find replacement knives.   Are these the same as used in any other 12.5" planer and readily available?

Otherwise it's probably not much different from the other benchtop planers in that under $300 space.

I bought a Porter Cable Benchtop/lunchbox planer for about 280 with an extra set of knives

They are available for pickup from all my local lowes and I picked this over the WEN

Maybe take a look at it?

Sent from my iPhone using Tapatalk

  • Like 1
  • 5 weeks later...
  • 4 weeks later...
Posted

I have the Wen 13" (as opposed to the 12.5")... My dad has the Dewalt 735... is the Dewalt a better Planer?   Probably...and for about $400.00 more it should be.  I wanted to buy the Dewalt, but decided to take a chance on the Wen.  I am not sorry I went that route, the Wen has performed very well.  As far as how long it will last, Who knows, but at less than half the price of the Dewalt, it can be replaced with much less pain.  As for replacement knives.. they are available directly from Wen.  http://www.wenproducts.com/store/6552-043-Replacement-Blades-Set-of-3

  • Like 1
  • 3 weeks later...
Posted
8 minutes ago, jrobinson37 said:

i ended up going with the wen. It oes what i need of it and it does it well. And with the money i saved i was able to buy a drill press the same day!! 

Sounds like a great day.   Congrats

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Who's Online   3 Members, 0 Anonymous, 68 Guests (See full list)

  • Forum Statistics

    32.1k
    Total Topics
    437.6k
    Total Posts
  • Member Statistics

    26,008
    Total Members
    3,644
    Most Online
    Bob44
    Newest Member
    Bob44
    Joined