Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

re-gluing a joint?

Featured Replies

i have acquired a family silverware box that is starting to come apart. not sure how glue it back together. it has little or no $$ value, but it would be hard to calculate the sentimental value.

my concerns are:

i don't know what was used originally, so i don't know what will stick it back together.

if i try - say,TBII, and it doesn't work - where do i go from there?

it is a small joint, - i can't clean it out, without making the box worse.

i have some syringes to inject the adhesive with, just not sure what to use.58c474f36b49e_IMG_1179-Copy.thumb.JPG.4bd446815bd6915f491f51f2f21fe147.JPG

any suggestions?

Several thoughts. Epoxy is my go to with potentially contaminated surfaces. The problem is that it will also mess with your show surface. Use it in such a way that nothing squeezes out. 

 

I would agree on epoxy... if you want something a little easier to work with, something like weldbond would work on a contaminated surface and is easy clean up. I've done similar things with polyurethane glue, but that tends to make a mess so I would avoid it here.

 

Carefully mask the surfaces right up to the joint & then insert the epoxy & clamp. Then wipe off the squeeze out. West Systems is thin enough that it would go in there. Remove the tape before the glue fully sets.

29 minutes ago, drzaius said:

Carefully mask the surfaces right up to the joint & then insert the epoxy & clamp. Then wipe off the squeeze out. West Systems is thin enough that it would go in there. Remove the tape before the glue fully sets.

This and I think I might even mask the bottom of the joint some so the epoxy doesn't seep all the way through.

I fixed something very similar to that not long ago.   I hit it with a very short blast of compressed air to blow the dust out, then used one of the little squeeze on the sides bottle of Locktite super glue control gel.   I don't have any idea how long it will last, but there was no cleanup, and it seems pretty strong for now.  I didn't squeeze in enough for any of it to come back out.

http://www.google.com/shopping/product/17521266826242166706?lsf=seller:8740,store:632885631072309028&prds=oid:17733221935658232628&q=locktite+super+glue&hl=en&ei=VILEWM3MOYXFmwHPubfoBg&lsft=cm_mmc%3DShopping-_-LIAs-_-D24-_-100371839&lsft=gclid:Cj0KEQiA3Y7GBRD29f-7kYuO1-ABEiQAodAvwPqkLkvPTVSeLoV1I9h_bB_ioxxGFzmHcJM9TBTyJZAaAq6e8P8HAQ

 

I use this stuff a lot, along with the liquid variation in the same bottle.  Home Depot had a display in the paint section the last time I was in there with cards of three of the little bottles marked down to $1.20.   I cleaned them out.

  • Author

i had thought about epoxy, - i will tape off the bottom, since there is a drawer below this joint. (and tape around the joint). i also thought about the super glue gel, but i have not used it before - wasn't sure if it would set up before i could get it far enough down the joint.

i will try the epoxy, it was my first thought, i will be "sparing" with it - try not to have a ton of squeeze out.

thanks for the suggestions!

Flat toothpicks make decent applicators for epoxy.  

That particular super glue get won't set up fast enough to get away from you.  Do test to make sure the joint will close up, regardless of what glue you use.  The advantage of the super glue is that no clamping is needed other than to hand hold it for 20 seconds.  You can do a test squeeze out on a piece of paper to get the feel for the applicator bottle-you squeeze the sides, but there is not much in that little bottle. A little dab will do you in that joint.  Read the instructions on the back for how to open the little bottle, that also opens the hole in the top, which is pretty tiny.

If I need a quick, oddball push stick that needs a handle, I'll stick it together with that glue.  I have some that are years old, and still holding.  I use, and keep, all sorts of adhesives, from 5 gallon kits of West, to various little duotubes that require a gun, and a mixing nozzle, but I still use those little Locktite bottles a lot.

 

  • Author
4 minutes ago, Tom King said:

Flat toothpicks make decent applicators for epoxy.  

That particular super glue get won't set up fast enough to get away from you.  Do test to make sure the joint will close up, regardless of what glue you use.  The advantage of the super glue is that no clamping is needed other than to hand hold it for 20 seconds.  You can do a test squeeze out on a piece of paper to get the feel for the applicator bottle-you squeeze the sides, but there is not much in that little bottle. A little dab will do you in that joint.  Read the instructions on the back for how to open the little bottle, that also opens the hole in the top, which is pretty tiny.

If I need a quick, oddball push stick that needs a handle, I'll stick it together with that glue.  I have some that are years old, and still holding.  I use, and keep, all sorts of adhesives, from 5 gallon kits of West, to various little duotubes that require a gun, and a mixing nozzle, but I still use those little Locktite bottles a lot.

 

thanks for the info. the joint closes fine with a little pressure. i may try that super glue. haven't done anything yet.

i had thought about using a razor blade in the gap to clean it out. don't have Xacto knife i can find. must be hiding with the half dozen tape measures i can't find  in a 1 car garage! LOL

No addtional suggestions on glue but paste wax on the finished surfaces will help with squeeze out not sticking. 

i have used this on similar situations and done well with it but epoxy would be better..  LINK

it cleans up well and if you make a small opening you can squezz it in your gap.then clamp

 

Elmers white glue is all you need. Dries clear. As suggested, compressed air to clean out the joint. 

 

-Ace-

If you don't want to go with epoxy, hide glue sticks well to miscellaneous old glue in my experience, and it'll be easier to clean up squeeze out.  I've used it to repair old chairs that had been reglued with either white or brown PVA glues, which don't tend to stick to old glue for long. 

I wouldn't use any kind of PVA glue, cause it just won't stick very well to old glue. The last thing you want is to get more old glue in that crack. Epoxy will be the best because it sticks well & is strong. CA glue is not as tough as epoxy.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.