Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Wood Storage- Vertical or Horizontal

Featured Replies

 

With all of this perfect shop, dream shop, and tiny shop talk lately I have been thinking about how to best utilize my shop space. The biggest thing that takes up space in my shop is the wood, be it scraps, sheet goods, or rough cut lumber .

 

 

So I'm going to ask what is the best way to store rough cut lumber vertically on it's end or horizontally on a lumber rack system?

 

 

Does it have an impact on the lumber if it's on it's end like getting a cup in the wood?

 

 

In the same manner does storing wood horizontally without weight on top cause warping corner to corner?

 

 

Sent from my SM-G930V using Tapatalk

 

 

 

 

i have both, and prefer horizontal for the majority of it. have vertical for shorts and leftovers from projects or special pieces. have got mostly air dried lumber but some is kiln dried.. depending on the lumber the vertical storage can cause some cup from end to end if you dont have it stacked right. i dont have access to my pics so cant post any.. the lumber yards in m area stack horizontal for large amounts and show rooms are vertical.. i use the vertical storage area for the picking of piece for a project the lighting is better for that there.

I've done both, depending on the shop I was in, haven't noticed any difference. I think where you can fit the lumber is more important than how you store it.

Long term storage is fine horizontal, but stuff I need to get to or is heavy I prefer vertical. 

  • Author

So it sounds like a personal preference sort of situation. Space and convenience are the only limiting factors. I really appreciate the info guys.

 

Sent from my SM-G930V using Tapatalk

 

 

  • Popular Post
9 hours ago, Llama said:

Long term storage is fine horizontal, but stuff I need to get to or is heavy I prefer vertical. 

Couldn't have said it better myself.

Unbelievably well timed (for me) and informative thread.  Thanks!!

(PS  I noticed at a local Woodcraft shop today, and also at a local hardwood dealer that large slabs were being variously stored horizontally or vertically.)

(PPS And yes, at this point I'm a wood hoarder, but I have so many skills to practice among planing, scraping and finishing, not to mention making jigs, that I use a lot of scraps and still appreciate having a couple of bins full of them!)

Vertical is is usually more convenient, but it takes up more space and eventually 4/4 boards can develop a bow.  I've seen it happen.  I keep my material stacked horizontally on racks, and while it is definitely a PITA to get to a board at the bottom of a stack, it's out of my way and it'll stay flat in perpetuity.

Fortunately, how often do you have to get to the bottom of a stack?  At worst, at the start of each project, which in my life is months long...so, not often.  Small price to pay to keep your lumber tidy and properly stored.

Oh come on ! Give in to the dark side ! Wood hoarding is a natural response to finding some nice looking boards even though you don't have a specific need for them right now. 

56 minutes ago, Eric. said:

At worst, at the start of each project, which in my life is months long...so, not often.

I'll leave this one alone :) 

57 minutes ago, Eric. said:

eventually 4/4 boards can develop a bow

How long does it take to bow? A week? 6 months? Depends on species? 

I will be buying a bunch (150-200bf) of a few different species to have it on hand (and at a much better price). My thinking is to get some 4/4, 6/4 and 8/4 in certain materials. I'd like to stack what I can vertically. Or, dedicate a rack to each species, and maybe each section, has one thickness.

Over thinking this a little, but I think when I get it in I'll go through the boards and get the good stuff separated from the not so good stuff... Or in reality, I'll be tofu king lazy and just stack it all up... Never stored that much material before, so I'm open to ideas and best practices. 

3 hours ago, Llama said:

How long does it take to bow? A week? 6 months? Depends on species? 

Yeah it's really hard for me to put a number on that...all I can tell you is they will tend to bow eventually.  The longer the board and the more severe the angle at which they're set against the wall, the faster it'll happen.  8/4 seems to be pretty much impervious to this problem, so if you did want to utilize some vertical storage, I'd put my thicker stock there.

Over the years I have had both vertical  and horizontal storage. New material for a current job is vertical. Stock that I always want handy like poplar is vertical. Most nice boards are horizontal. Most precious hoard is always horizontal .  Put the 8/4 in the back of thinner boards when storing vertical. I modified an old pallet by addding a lip  several inches taller on 3 sides. When a vertical stack starts kicking out at the base either you or the wood is going to get hurt, sometimes both !

22 minutes ago, wtnhighlander said:

Just rotate the boards in the vertical stack periodically, to counteract any tendancy to sag/bow. Much easier than sorting through horizontal stacks to find "just the right piece".

(Duh.)  Sounds like a reasonable approach!

  • Popular Post
11 hours ago, wtnhighlander said:

Just rotate the boards in the vertical stack periodically, to counteract any tendancy to sag/bow. Much easier than sorting through horizontal stacks to find "just the right piece".

LOL

We'll put that one in the same category as backing up your hard drive and cleaning the fridge...things you should do - but don't.

  • Popular Post
22 minutes ago, Eric. said:

LOL

We'll put that one in the same category as backing up your hard drive and cleaning the fridge...things you should do - but don't.

I'll have you know I clean out MY fridge at least once every 10 years whether it needs it or not !

 

 

Kids changed my fridge schedule. Every time they spill, I haul the guts out and they clean it. Hard drives became easy with auto services. Now the procrastination is whether or not to change oil at 7K or 8. The struggle is real. 

Drifting back toward the original topic, you guys provided enough information for me to pull the trigger, buy a rack and reorganize my hoard, er, wood.  Many thanks.

Now I'm going to rest up a few years before cleaning the fridge.

I do horizontal for general storage:

58e259dc2820b_LumberStorageReorg(1).jpg.9db3c0f2a925f5f53ac3e16b4bc2e9b9.jpg

Vertical for material I have pre-sorted for upcoming work.

5827be31e5ae1_Wood-aholic(1).jpg.2b72220b3f733b1c08c4b868b039da76.jpg

And "quickie" overhead racks of scrap plywood for parts in progress or acclimating material.  This keeps thing up and out of the way of anything (meaning me) causing dings or other damage.  It also keeps my work surfaces and tools clear of clutter while projects are in progress.

58e259e5d30fd_LumberStorage2014(4).jpg.67820739e76beaf70ad9f2e9eed0c458.jpg

There never seems to be one answer . . .

No question, best for the wood. . .  Horizontal for anything you want to stay flat/straight.  Solid lumber or sheet goods.  

For things you are going to use quickly, vertical.  

Starting a project I'm in the racks getting out the lumber I need solid and sheet goods, or buying it.  It goes where I can get to it easily.  Lumber purchased for stock (long term storage) goes in horizontal racks, both solid woods and sheet goods.

Just my 2 cents.

QHC

  • 1 month later...

P1040614.jpgAnother idea if anyone is still reading.

I made a horizontal lumber rack, that I load from the end. I store boards on edge, so any 1 board can be slid out without moving others.

On 5/11/2017 at 9:13 AM, over40pirate said:

P1040614.jpgAnother idea if anyone is still reading.

I made a horizontal lumber rack, that I load from the end. I store boards on edge, so any 1 board can be slid out without moving others.

It's a wood library!

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,011 Total Members
  • 3,644 Most Online
  • bobtjanitor Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.