Recommended Posts

Posted

The BIg Daddy Bit  got here today. It's a monster. I put in the router, turned it on to see how it goes and the router fell apart. 

It could be to big for the router or maybe I had it going to fast. 

I'll see if I can piece it back together and might try again but I'll be looking at another router. 

IMG_4945.JPG

Posted

http://www.tritontools.com/en-GB/Product/Power Tools/Routers/TRA001

This is one powerfull router has a plunge mode and is variable speed which is great for woods like cherry and maple.  I use it in my router table.  There is another that is a little smaller....http://www.tritontools.com/en-GB/Product/Power Tools/Routers/MOF001 

I use this one outside of the router table.   If you are interested, I have been recommending Market Hardware in North Carolina. 828/317-1669. Larry is a one man shop that repairs and sells routers.  His support is excellent and I think he deserves my business.

Posted

I think the pic should tell you not to try it again. A more substantial router is is called for. Heck, you wanted one anyway, didn't ya? ;)

  • Like 2
Posted
2 hours ago, Ronn W said:

http://www.tritontools.com/en-GB/Product/Power Tools/Routers/TRA001

This is one powerfull router has a plunge mode and is variable speed which is great for woods like cherry and maple.  I use it in my router table.  There is another that is a little smaller....http://www.tritontools.com/en-GB/Product/Power Tools/Routers/MOF001 

I use this one outside of the router table.   If you are interested, I have been recommending Market Hardware in North Carolina. 828/317-1669. Larry is a one man shop that repairs and sells routers.  His support is excellent and I think he deserves my business.

As nice as it would be to support that bloke, postage might be a bit much across the Pacific.  My local tool guy has them with free postage and sale price. Could be a winner. I thought the one I had was big at 1300W. I see now that it was a baby router.

 

2 hours ago, K Cooper said:

I think the pic should tell you not to try it again. A more substantial router is is called for. Heck, you wanted one anyway, didn't ya? ;)

Good advice. I might retire the Bosch. Always a good excuse for new tools.

Posted

Whoops. Not seen a router fail like that since I saw a Black & Decker shake itself apart.

Yes anything in the 1.8 to 2KW power range will have ample power for that bit. Not so sure I would use it handheld though. I would mount it in a router table.

  • Like 1
Posted
22 minutes ago, TerryMcK said:

Whoops. Not seen a router fail like that since I saw a Black & Decker shake itself apart.

Yes anything in the 1.8 to 2KW power range will have ample power for that bit. Not so sure I would use it handheld though. I would mount it in a router table.

Nothing exciting happened. It just kind of rattled for a bit and then lowered back down in the table. 

 

Definitely. There's no way I'd attempt to use it handheld.

 

 

Posted

I dunno why but that picture of your router giving up on life due to Big Daddy just cracks me up. 

I got the 3.25HP triton. plenty powerful, though the thing I bought it for, being able to raise/lower it from above table freaking broke instantly and I still haven't sent it back. 

Posted

Get a tried and true Porter Cable 7815, get it in a lift and dedicate it to the router table and stick that bit in it. IMO that bit should only be used in a router table. Thats a lot of meat cutting blades to be used handheld. Maybe if I had a Festool OF 2200 Id consider, but anything less, Id keep it to the router table.

Posted
14 minutes ago, ben_r_ said:

Get a tried and true Porter Cable 7815, get it in a lift and dedicate it to the router table and stick that bit in it. IMO that bit should only be used in a router table. Thats a lot of meat cutting blades to be used handheld. Maybe if I had a Festool OF 2200 Id consider, but anything less, Id keep it to the router table.

This is right on and no way would I use that bit in my OF 2200 or any other hand router period! Full disclosure I have both that bit and the OF2200 router. I use the bit in my router table that has the PC 3hp router w lift and it works great.

Posted

I have used some huge bits in my PC 7518 handheld and it is definitely a sphincter tightening experience. Even with years of experience it was scary. I was taking less than 1/8 per pass. Router table is the way to go unless the piece is too big 

Posted

I can't get the Porter Cable in Australia. Otherwise I'd look into it.  The Triton looks great on paper and in ads so I'll probably pick up one of those to see how performs. 

Posted

I can get everything but the router it seems. My dad has used Milwaukee Drills for years and they've always felt good. Can't see the router though. 

The next option would be a Makita that's about $150 more than the triton. 

Posted
2 hours ago, lewisc said:

I can't get the Porter Cable in Australia. Otherwise I'd look into it.  The Triton looks great on paper and in ads so I'll probably pick up one of those to see how performs. 

Would it work power-wise if you could? If so Im sure someone in the US sells and ships them to AUS.

Posted
1 hour ago, ben_r_ said:

Would it work power-wise if you could? If so Im sure someone in the US sells and ships them to AUS.

Not sure. Postage might be a bit much. The big daddy bit was $35 to get here so a router would probably be considerably more. 

Buying local also makes it easy to fix in case something goes wrong. 

Posted

I got the Triton yesterday. Installed it today and did some testing.

My initial thoughts are:

  • Easier to adjust than my last one 
  • It almost seems a bit flimsy with the plastic parts that control the height adjustments - Here's hoping it lasts
  • Seems like plenty of power to operate all the bits.

I had a little accident with this piece. A good time to learn some respect for the  big daddy bit (or any bit) vs end grain. 

IMG_4978.JPG

Posted

I don't think the Big Daddy is too big for hand-held use.  I've done it a number of times and I'll be doing it again this weekend.  If you have a good router with enough power it's not dangerous.  The nature of that particular bit means that you're not removing much material, and the insane shear angle of the cutters means the risk of a catch is minimal if you use some sense when routing.  Understanding how wood behaves and how it interacts with the cutters makes it much safer than when in the hands of an ignorant woodworker.  Knowledge is power.

I use the Big Daddy in my OF1400 without trouble.  I recommend keeping it in a table until you're familiar and comfortable with wood behavior and your tools.

Posted
8 hours ago, lewisc said:

I got the Triton yesterday. Installed it today and did some testing.

My initial thoughts are:

  • Easier to adjust than my last one 
  • It almost seems a bit flimsy with the plastic parts that control the height adjustments - Here's hoping it lasts
  • Seems like plenty of power to operate all the bits.

I had a little accident with this piece. A good time to learn some respect for the  big daddy bit (or any bit) vs end grain. 

IMG_4978.JPG

looks like you are taking too big of a bite in addition to the grain direction issues .  

Posted

Yeah, I might slow down a bit and do some reading/watching/thinking about this stuff. 

How much is too much to take off? I trimmed it so it was about 3mm away from the template (give or take a mm)

 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Who's Online   4 Members, 0 Anonymous, 50 Guests (See full list)

  • Forum Statistics

    32.1k
    Total Topics
    437.6k
    Total Posts
  • Member Statistics

    26,008
    Total Members
    3,644
    Most Online
    Bob44
    Newest Member
    Bob44
    Joined