Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Slab-Top Roubo

Featured Replies

  • Popular Post

Hi, Ya'll

I bought the lumber for this thing in May 2015.  A guy a few towns over was clearing out the contents of his deceased father's barn, and was selling this on CL as "Maple Beams."  This is a very soft maple.

I ended up getting about 250 board feet of 16/4, 12/4, and 8/4 for $200. I used the 12/4 and 16/4 for this bench, and 12/4 and 8/4 for a bed I built my daughter.  The bench is 8'5" long, and 33.5 inches tall.  The bench top ended up being a hair under 3.5" after flattening.

I went with the Benchcrafted leg vise, and omitted a tail vise due to cost.  I plan on getting a Veritas bench pup to help in that area.  I'm already seeing how useful it would be.

I did an offset split top, with the front slab being wider than the back slab.  I also did my gap-stop differently, adding a reversible tool tray. I can flip it over, and have it flush with the bench top.  It's not very wide, so only smaller items fit in there, but I've found it useful so far.  It does collect chips like crazy though.  Not a big enough bother to flip over permanently.

It took me 23 months from start to finish, with several projects in between, but it's done, and I love it!

I've got about $600 in this bench including the vise hardware and Gramercy Holdfasts.

Chris

Far, far from perfect, but it's flat, it's heavy, and it holds work. A close look reveals extensive tearout and tool marks.  That's built-in character, and frankly, I needed to just be done with this thing.

bench 1.JPG

Bench 2.JPG

Cool bench.  You're missing out on half the functionality without a tail vise though...you may grow to regret that decision.

  • Author
28 minutes ago, Chet K said:

You might want to consider the Veritas inset vise also.

The bench does look nice.

I saw the inset vise.  I'm resisting it because a: it's ugly, and B: I saw a review that said it had gotten loose/sloppy after a couple years.  I don't want to dig a big ass hole in my bench for something that's a temporary solution.

If the bench pup doesn't do what I need, I'll retrofit the BC vise.  Not much more work than installing it while I was building, because the tops are slabs.

Thanks!

 

The HNT Gordon tail vise would be an easy drop in there as well.

Nice job on the bench!

Geesh. After 22 months without finishing, I would have burned it to the ground. Glad you didn't.

 

  • Author
46 minutes ago, TIODS said:

The HNT Gordon tail vise would be an easy drop in there as well.

Nice job on the bench!

This is intriguing. Never seen it before. It would certainly fix my ugly concern, and looks really well built. 

Thank you for showing me this. 

15 minutes ago, Chris208 said:

This is intriguing. Never seen it before. It would certainly fix my ugly concern, and looks really well built. 

Thank you for showing me this. 

 

I really like mine.  Pretty easy to install as well.  I shot some video of it in my OF table thread in the journal section.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,011 Total Members
  • 3,644 Most Online
  • bobtjanitor Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.