Recommended Posts

Posted

Received my new lathe on Wednesday and the box looked to be in pretty good shape so I decided to wait and open it when I had time to unpack it and set it up right. Normally when I get a new tool I just can't wait and rip it open to play with it. I spent all day yesterday building a nice solid stand with a drawer to hold all the tools and  gadgets. Even put a couple of coats poly on it. This morning I got out to the shop and opened the box, read though the constructions and drilled the mounting holes in the cabinet. I talked the wife into helping me lift it out of the box and set it on the stand. Went to put the bolts in and noticed what at first looked like a scratch. Of course not a scratch. I'll have to call CPO tomorrow and see what happens next. 

IMG_20170730_080319888.jpg

IMG_20170730_080334072.jpg

Posted

They'll probably just send you another one.   Was there any apparent damage to the box?   Fairly new cast iron does that sometimes for no obvious, visible reason, but it could have been shipping damage.

  • Like 1
Posted

The box was dirty and smudged but no real signs of abuse. If that had been the case I probably would have opened it right away. The other thing that bothered me was the control panel was knocked out of the housing. It just snapped back into place and didn't really bother me until I saw this damage. The box is heavy cardboard and the lathe was in styrofoam  forms. The styrofoam wasn't even broken too badly. 

  • Like 1
Posted

Just an update. Called CPO and told them about the damage. They have scheduled UPS to come and pick up the broken one. The replacement is supposed to ship out tomorrow. We'll see how it goes. Keeping my fingers crossed that I don't have to re-turn another one! 

  • Like 1
Posted

Was kind of dreamin that they would say shipping it back wasn't worth it and let me keep the bad one. Had thought about donating it to the school district shop program. That didn't happen. I have to mark a return number on the box and set it outside for the UPS guy tomorrow before I leave for work. Don't know what they will do with it.

Posted

It's no mystery.   Cast iron cracks sometimes just from stress in the casting process.  Companies like Delta and Powermatic used to pile castings outside for a year to equalize before taking them back inside for milling into finished machines.   These days, I expect the majority of companies have cut that cost, and expect a percentage of this.  One of my mortisers came with a cracked, and warped base.  I'm sure it wasn't like that when it was packaged.

Posted

That way, when any casting broke, or warped too badly to be useable, it just got melted down again, so the only thing lost was time.  

When I called Woodworkers Supply about the cracked mortiser base, they didn't even ask for a picture.  They just told me to toss the cracked one, and the new one was headed this way that day.  I didn't have anything to complain about.

Posted

Well that sucks. 

 

Similar thing happened with my dw735. The base looks like a fork lift hit it and sheared off a piece of the base. I had it sitting in a box for 4 months before I even opened the box. Then I built a huge cabinet for it and started to mount it before I realized the danger. But it bolted down fine. It all looks level and boards plane out flat. 

So I said eff it and cranked the bolts down and called it good. Had I opened the box sooner I would have exchanged it but since I had it for 4-5 months at that point I didn't want to bother when it was merely cosmetic. 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Who's Online   3 Members, 0 Anonymous, 33 Guests (See full list)

  • Forum Statistics

    32.1k
    Total Topics
    437.6k
    Total Posts
  • Member Statistics

    26,008
    Total Members
    3,644
    Most Online
    Bob44
    Newest Member
    Bob44
    Joined