Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

My first end grain cutting boards

Featured Replies

  • Popular Post

I made a couple end grain cutting boards. They are hard maple, cherry, purpleheart, and walnut. Im keeping one of them, and will be gifting the other one to my Mom and Dad for Christmas. 

20171101_124623.thumb.jpg.5622188a3e2a6141e74d10d910d2aa3a.jpg

In case youre wondering, yes, the burners are off haha.

20171101_192051.thumb.jpg.1c031a841a93da9cd2272ce24aad5db6.jpg

I used a router and sled set up to flatten the end grain. The method worked really well once I figured out the technique. For whatever reason, the router bit left a much better surface when I made the cut cutting against the grain. At first, I would make a pass, move the sled, and make another pass going the other direction, but wasnt getting a great result. I discovered if i cut against the grain, like youre supposed to with a router, that the surface came out much smoother. And then lots of sanding. Lots of sanding. I did find that using a card scraper on the rough board to help smooth out the bit tracks saves a good amount of time sanding. Finally, I finished the boards with a couple coats on each side with mineral oil, and worked in a couple coats per side of a mixture of mineral oil and beeswax. I melted the beeswax into the mineral oil at about a 1:4 ratio. I let each coat sit overnight, then wiped off the excess.

20171101_192039.thumb.jpg.82ebffb9797d0cb1eba1a18d65b3ba7f.jpg

Heres a couple photos mid-build. My new Bessey Revo Jr. clamps came in awesome for this project. After using parallel clamps, i dont think ill ever buy pipe clamps again. Damn they are nice.

20171106_201904.thumb.jpg.f94885efd627cb4e50d2eaf98fc72713.jpg

20171106_201926.thumb.jpg.a413d7ed4d71c38b71dc09e60d550d10.jpg

Heres the router flattening jig i made. Just mdf for the base and the bottom of the router sled, and the router guides are baltic birch plywood. 

20171106_200117.thumb.jpg.57984f9016154e981b480de54c9d4337.jpg

The two pieces of wood clamped down on either side of the board was how I held the board in place. Maybe not the best option, but it got the job done. One more of the jig.

20171106_200050.thumb.jpg.f1e5ecf4f041ed8479b215102a168635.jpg

All in all, wasnt too bad a project. Not the funnest thing in the world to make, I now understand why people say if youre making alot of these, a drum sander is a must. But for just a couple, the router jig is a good option. Makes a hell of a mess though.

Thanks for reading.

 

 

 

 

 

 

 

 

 

 

 

Well executed and great outcome. Now, which one does mom & dad get!

Nice boards!  It's always fun to see how the patterns turn out. I screw some rubber feet on the bottom of mine to keep it off the bench. 

Very nice. In my experience people love getting these things as gifts.

Nice looking boards !

Good clamps are addictive, welcome down the rabbit hole !  You really get spoiled when you get a drum sander. 

  • 2 weeks later...

Nice router flatening jig.  I use something like that to flatten the tops of tree slabs and segments/stumps.  Your seems a lot more stable.  Still had a big mess even with a vaccum?  Since the sides are high some of the dust must get trapped in, maybe a second vaccum attached to the side would create a sort of wind tunnel effect and suck the rest out.

Those are great looking!  We've made about 40 or so in varying sizes and woods and I have to second the mention of a drum sander - it's an awesome way to level these boards.  I know your parents will love their new cutting board.  Now the trick will be to get them to actually use it.  I don't think any of the ones we've made have been used yet.

David

  • Author
On 11/19/2017 at 12:59 PM, Adam Campbell said:

Nice router flatening jig.  I use something like that to flatten the tops of tree slabs and segments/stumps.  Your seems a lot more stable.  Still had a big mess even with a vaccum?  Since the sides are high some of the dust must get trapped in, maybe a second vaccum attached to the side would create a sort of wind tunnel effect and suck the rest out.

I didnt use dust collection on the router. Should have but find it to almost be more of a PITA than sweeping up afterwards. 

The flattening jig worked great. Not the ideal method for this but a drum sander is not high on my priority list right now. Many other core tools i have yet to buy, so they are at the front of the line. 

I was pretty pleased with how well a card scraper worked as a first smoothing step after flattening.

  • Author
On 11/20/2017 at 5:53 PM, difalkner said:

Those are great looking!  We've made about 40 or so in varying sizes and woods and I have to second the mention of a drum sander - it's an awesome way to level these boards.  I know your parents will love their new cutting board.  Now the trick will be to get them to actually use it.  I don't think any of the ones we've made have been used yet.

David

Thanks! They do make for a cool kitchen decoration! Mines been getting used and i sure enjoy it. Hopefully my parents will use theirs too.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Who's Online (See full list)

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,011 Total Members
  • 3,644 Most Online
  • bobtjanitor Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.