Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Von's shop tour and setup log

Featured Replies

  • 2 weeks later...
  • Replies 387
  • Views 75.3k
  • Created
  • Last Reply

Top Posters In This Topic

Most Popular Posts

  • Immortan D
    Immortan D

    Count me in... I have enough "nice to have" tools that I never use. Things like the Starrett trammel set:   I never used that thing, not once, and I had it for many years.

  • Finally got some shop time yesterday and make progress on the in feed table. A got a couple of clamps and also some adhesive silicon pad. Building on the advice from wtnhighlander and Mark J, I replac

  • I'm blaming gee-dub for this upgrade :-) More seriously, in making the urn I was doing a bunch of micro-tweaking of my router fence to dial in the rabbet on the top and remembered his recommendation o

Posted Images

  • Author
  • Popular Post

A couple router table upgrades installed today in shorts bursts with warm ups in between.

First, a Milwaukee 5616 to replace my 5615 and give me variable speed. I think it was Glenn who pointed this out to me as a potential straight-forward upgrade path, so many thanks for that.

PXL_20260208_145607341.thumb.jpg.b6a8c67aa8728435174647102aa557db.jpg

Second, a new plate that allows me to install different inserts so I can run larger (and smaller) bits with proper support. I took the time to drill out an access hole on the new plate so I can get to the height adjuster on the router from above. I'm not sure how much I'll use this, but it's an option now.

PXL_20260208_210406448.thumb.jpg.7a20bef051a96788931fccfa42dfae6f.jpg

Too cold to make any dust today. The 5615 will go on the shelf as a spare.

 

  • Author
  • Popular Post

I had my first experience with Kaizen foam today. I bought a 1 1/8" thick sheet to use in my various cabinet drawers (it just barely clears). It's finicky to work with but I got what-I-will-call-passible results after a little practice. Basically you cut around your tool to a multiple-of-1/8" depth and then dig under the foam and peal out the appropriate number of layers of the foam to create a recess. Like many things it's easy to do if you aren't picky and harder if you are.

I did buy the little red cutters and for $6 they were worth it to help clean up the bottoms of the recess and to restart a "peal" if I pulled too hard.

PXL_20260210_191944752.thumb.jpg.87324ab6cc2a112876ef3e5bdc2194d9.jpg

What do you use all those micrometers for?  Do you do machinist work, too?

  • Author
  • Popular Post
On 2/11/2026 at 8:08 AM, Mark J said:

What do you use all those micrometers for?  Do you do machinist work, too?

I was worried someone was going to ask me that :-)

Tool Acquisition Disorder. I've picked them up cheap at various places or had them land in my lap for free and thought "these might be useful." So far I haven't found any task for which my calipers didn't suffice. My experience with precision is one knows when one needs more of it and so far, I just haven't. But I'm sure if I were to get rid of them, the next day...

I could imagine getting into machining for restoration work, but even so I think I'm a long way from work where I would really benefit from a micrometers over calipers.

On 2/10/2026 at 2:10 PM, Von said:

I had my first experience with Kaizen foam today. I bought a 1 1/8" thick sheet to use in my various cabinet drawers (it just barely clears). It's finicky to work with but I got what-I-will-call-passible results after a little practice. Basically you cut around your tool to a multiple-of-1/8" depth and then dig under the foam and peal out the appropriate number of layers of the foam to create a recess. Like many things it's easy to do if you aren't picky and harder if you are.

I did buy the little red cutters and for $6 they were worth it to help clean up the bottoms of the recess and to restart a "peal" if I pulled too hard.

PXL_20260210_191944752.thumb.jpg.87324ab6cc2a112876ef3e5bdc2194d9.jpg

I admire the commitment. No way I'd have the patience. Plus, the moment i got every single tool cut out, I'd change my mind on what should go where. 

  • Popular Post
On 2/11/2026 at 5:48 AM, Von said:

Tool Acquisition Disorder. 

I have the same condition.  Neglected by medical science.  I cannot resist grandpa's or dad's old tools and other items.  I have sent many down the road to people who will use them but many still hang on the wall or set in bins on the top closet shelf. :rolleyes:

  • Popular Post
On 2/11/2026 at 10:48 AM, Von said:

Tool Acquisition Disorder

Count me in... I have enough "nice to have" tools that I never use.

Things like the Starrett trammel set:

Screenshot2026-02-11153425.jpg.2c13d5be1e52f02df1f27acb0cf57c7e.jpg 

I never used that thing, not once, and I had it for many years.

  • Popular Post
On 2/11/2026 at 1:26 PM, Immortan D said:

Things like the Starrett trammel set:

You can't get rid of the Starrett!

My father was a machinist, and I inherited some Starrett.  I use the combination squares, but the rest just sits in a drawer.  I'll never get rid of them, though.

  • Popular Post
On 2/11/2026 at 8:23 PM, wtnhighlander said:

Ok, I understand the various points, but what are the spheres used for?

Balls are there to reference an existing hole. Say you  need to scribe a circle around a hole you already have in your work piece, don't ask my why. So you pick the ball that best suits the hole, must be bigger than the hole so it self centers in it. And there you have it, provided that the ball and the scribe point on the other leg are on the same plane, you'll get the job done, no problem.

Or maybe they are there just for marketing reasons, those things being so shiny and chrome. 

On 2/11/2026 at 7:54 PM, Immortan D said:

Balls are there to reference an existing hole. Say you  need to scribe a circle around a hole you already have in your work piece, don't ask my why. So you pick the ball that best suits the hole, must be bigger than the hole so it self centers in it. And there you have it, provided that the ball and the scribe point on the other leg are on the same plane, you'll get the job done, no problem.

Or maybe they are there just for marketing reasons, those things being so shiny and chrome. 

Ah! Makes perfect sense. I was wondering about that too. 

  • 4 weeks later...
  • Author
  • Popular Post

Organized the odds and ends in my drill press drawer with a piece of Kaizen foam. I found drilling holes works OK but starting the hole with an awl helped keep it clean. Twist or brad point bit seemed to work equally well. The foam flexes enough that using a bit the same size or anywhere close as the shank worked fine. The result is a lot more efficient in terms of space than the piece of pegboard I had been using since I can custom space the holes.

Guys I've seen on YT who make super clean hole use a piece of heated pipe to cut the hole and fuse the sides at the same time. I'm just not that particular. I also could have laid out a grid to keep my holes straighter.

PXL_20260307_152354245.thumb.jpg.0996ac377bea7e19c53c9200c7f427f7.jpg

 

  • 2 months later...
  • Author
  • Popular Post

I recently cleared a bunch of lumber out of a corner of the shop to the shed leaving me an empty wall. Not sure what I'm going to do with it, but it fits a full sheet of plywood so I decided to go ahead and put up french cleats. I figure this will let me adapt it to whatever I want. The eagle-eyed will notice I cut the sheet into three pieces along the length as I'm not lifting full sheets of plywood up this high. The cuts were made where the cleats will hide the seems.

I'm also going to expand the cleats on the catty-corner wall with the clamps to a full sheet as well as I need more room for clamps.

PXL_20260517_171529947.thumb.jpg.d63c6a395f32d76c204ff292f915f504.jpg

 

  • Popular Post

shop14.thumb.jpg.a182ca49e7809306023101407a274a00.jpgshop8.thumb.jpg.ba6e86d0c0f51b55b791f2e323f73d04.jpg

I put a sheet of 3/4 ply up on this wall it i great for organizing a lot of my most used things... if I put them away:P

  • Popular Post

Von, is there a reason why you put up a sheet of plywood for under the cleats? I just screwed my cleats into the studs.

  • Author
On 5/18/2026 at 1:54 PM, fcschoenthal said:

Von, is there a reason why you put up a sheet of plywood for under the cleats? I just screwed my cleats into the studs.

Aesthetics mainly. My 60-year old drywall is fairly beat up, is unevenly painted around where shelving standards used to be, and has a bunch of screw holes that are unsightly.  Probably take more work to make it look good than to plywood over it.

On 5/18/2026 at 3:14 PM, Von said:

Aesthetics mainly. My 60-year old drywall is fairly beat up, is unevenly painted around where shelving standards used to be, and has a bunch of screw holes that are unsightly.  Probably take more work to make it look good than to plywood over it.

That's what dry wall joint compound is for, buy a cheap putty knife a small container of compound put a few thin coats of compound over holes and screw holes sand it back paint and Bobs your uncle. 

  • Author
On 5/18/2026 at 6:45 PM, Dave H said:

That's what dry wall joint compound is for, buy a cheap putty knife a small container of compound put a few thin coats of compound over holes and screw holes sand it back paint and Bobs your uncle. 

 

Been there, done that. The plywood is easier for me :-)

On 5/18/2026 at 5:14 PM, Von said:

Aesthetics mainly. My 60-year old drywall is fairly beat up, is unevenly painted around where shelving standards used to be, and has a bunch of screw holes that are unsightly.  Probably take more work to make it look good than to plywood over it.

That's as good a reason as any. 

  • Popular Post
On 5/18/2026 at 3:14 PM, Von said:

Aesthetics mainly. My 60-year old drywall is fairly beat up, is unevenly painted around where shelving standards used to be, and has a bunch of screw holes that are unsightly.  Probably take more work to make it look good than to plywood over it.

Perfect.  "Pay no attention to that man behind the curtain".  Gives you a clean backboard and you don't have to spend time recovering an aging surface.

  • Author
  • Popular Post

Finished getting plywood and cleats up on the second wall in the old lumber storage corner. Everything just thrown up haphazardly at the moment. Nice to be able to get long (4') clamps up higher and out of the way.

PXL_20260523_195817404.thumb.jpg.aba82e799ed8def56b4495c64d438043.jpg

Von, the cleat wall looks awesome.  In my experience you will find that super useful.

P.s. You've got the same tablesaw blade holder I do.  I think I made it back about 2003 from a plan in one of the wwing mags.  I've toyed with other ideas and designs that show up in the trade rags but, it just keeps on keepin' on. 

On 5/24/2026 at 9:49 AM, gee-dub said:

 

P.s. You've got the same tablesaw blade holder I do.  I think I made it back about 2003 from a plan in one of the wwing mags.  I've toyed with other ideas and designs that show up in the trade rags but, it just keeps on keepin' on. 

I might have to steal this idea. I just stick mine onto a wall and just yesterday I was thinking how ugly and disorganized it looks. 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.