Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

And Now The Chair

Featured Replies

  • Replies 55
  • Views 9.2k
  • Created
  • Last Reply

Top Posters In This Topic

Most Popular Posts

  • I failed to mention that I wussed out on using the template as a guide for the flush trim bit and router. I took the template and using a fine point Sharpie, traced the pattern on one side assembly an

  • I made a trip to the casino in Lake Charles on Tuesday and back on Wednesday. I’m sure glad I bought the walnut for this project before I left. Kind of like buying a round trip ticket to Vegas to make

  • The 2” x 3 1/8 x 5/8” thick tiles were made from some 6’ walnut shorts that I got on the cheap from my local dealer. These are 5/4 but for half the price of 4/4, it was worth the price for labor to mi

Posted Images

Every time i see bent lamination i get a bit excited. It's such a fun concept and technique.

Looking great so far!

This is great. What a ride. Lots of cool techniques and processes. I am really enjoying this.

  • Author
  • Popular Post

Maybe a bit anal but I only had one chance at this. After centering the back rails between the two uprights, I marked a fine pencil line and with a marking knife, I scribed the line.

IMG_7324.thumb.jpeg.2d826ec6246b187e99eb9f2364dfc009.jpeg
 

Using my wheel marking gauge, I transferred this line to the other 3 sides.

IMG_7326.thumb.jpeg.220d1655deb1ae4c1c1b67d45ff51e62.jpeg

using a sharp chisel, I cut down to the line on all four sides. IMG_7328.thumb.jpeg.206efb1d3f337cf994403f98055899f9.jpeg

This not only gave me a clean shoulder but also provided me with a guide for my flush trim saw, down to the required depths. 
IMG_7325.thumb.jpeg.4d09a685f8e80de5567cf2aaa7fdfc3a.jpeg

The mortises in the uprights are cut with the 8mm bit in the Domino at the second width setting. 
IMG_7330.thumb.jpeg.cbb455fd3f17deb79ab2f9fdc8843dbf.jpeg

With these dimensions, I was able to shape the tenons with a chisel and a fine cutting rasp for a snug fit.

IMG_7329.thumb.jpeg.cac2d24301803c22df1f0ce5ddeeb03b.jpeg

Another dry fit to confirm satisfaction. 
IMG_0170.thumb.jpeg.b1dd1edbeeb0353218489983b1be599d.jpeg

Happy with the results, I removed the screws from the sides and struts, added glue to the back rails and back into the clamps. The 3/8” square holes in the sides are where the screws attach to the struts and will be filled in with proud plugs. Now the not so fun part of cutting, sizing and drilling the 75 plus tiles. 

 

Nice work on making the tenons.  I take it using Dominoes would not have been easier?

Dominoes into a curved small piece like that is hard. Integral tenons is the way to go here. I like seeing someone cut an integral tenon and stick it in a domino mortise.

  • Author
  • Popular Post

What @Chestnut said. There wasn’t enough flat surface to use the Domino to cut a mortise into the back rails. Not for this grunt anyway! :D

  • Author
  • Popular Post

The 2” x 3 1/8 x 5/8” thick tiles were made from some 6’ walnut shorts that I got on the cheap from my local dealer. These are 5/4 but for half the price of 4/4, it was worth the price for labor to mill them down.

IMG_7314.thumb.jpeg.8eb8f6e7c62ef4605c1fd317a58e74ff.jpeg

i re-sawed approx 1/4” from each side and brought them down to the 5/8” on the jointer and planer. I then ripped them to 2” width on the ts and rounded over the edges on the router table. Sanding them to 220, I have six of these 3’ pieces.

IMG_7349.thumb.jpeg.2c92ca10a075094354e5b5c2f8fb438d.jpeg

Then to the ts, using my small sled, I cut them to length. 
IMG_7348.thumb.jpeg.d93625a2a044a883ab553769b3efdd28.jpeg

Back to the round over bit for the ends.

IMG_0171.thumb.jpeg.df554b5a35a4797c64105be0a26fe0e1.jpeg

IMG_7351.thumb.jpeg.7c0c71323efa4fe87c92aa2b28c23847.jpeg

Which yielded a stack of these.

IMG_7352.thumb.jpeg.eeb64c4400976c0193c282ea30c225ff.jpeg

To get a running bond pattern, we use some 1 1/2 tiles. These are made by joining two full tiles with dominos.

IMG_7344.thumb.jpeg.ff142a727786344b9254deda635057b5.jpeg

When the glue dries, back to sled to cut off 1/2 of one of the joined tiles. Yep, back to the round over bit for these cut ends. 
A 1/4” poly rope is threaded thru each tile twice ( 3 times for the 1 1/2 tiles and these are drilled 13/16” from the ends on the drill press.

IMG_7217.thumb.jpeg.54e2af22581b02a0c082049d9b77626d.jpeg

Just a few of the finished (un-finished) product.

IMG_7216.thumb.jpeg.2f8b436d4799490df3f39c636d18804e.jpeg
And speaking of finish, here are some on my clothesline drying rack after a coat of ARS gloss.

IMG_7372.thumb.jpeg.998eb9e367e825e7f3647cfe9a51f20a.jpeg

And speaking of ARS, after some final fine sanding, I put 2 coats of gloss and 1 of semi-gloss to the chair frame. 
IMG_7360.thumb.jpeg.36e82b5e7536562043d490c0a4d85aae.jpegIMG_7361.thumb.jpeg.237fe587c999bb3dd59eee8d04df8dec.jpegIMG_7362.thumb.jpeg.b5cc951821d5a16b50c87b76cc3f8ce9.jpegIMG_7363.thumb.jpeg.b55e5131ef6d4183dbb80ddae77fcfd3.jpeg
 

Tomorrow, weather permitting, I can apply another 2 coats to the tiles and we can start threading rope thru those holes. I can see the finish line but there a couple of dogs ahead of me! 

 

 

  • Author
  • Popular Post

I apologize for the redundancy from the stool build but in order to complete the chapters in the build, I’ll include all. After the tiles for the back rest had dried, like the frame, I gave them a final once over with a brown paper bag to rid them of their dust mites. Again, the tiles are held in place with the 1/4” poly rope and this is threaded thru the holes in the frame and tiles with a needle attached to the rope with Trilene fishing line. I cut a notch in the wire to hold the line in place. I heated the end of the rope with a little propane flame and with the aid a leather glove, pulled it to a point to aid in the threading. 
IMG_7366.thumb.jpeg.5a5b8fb9f13990a0f73d40ccfec6924f.jpeg

Back and forth we go, jiggling here and jiggling there while pulling on the needle to get the rope to the other sides.

 

 

 

And finally we have the tiles in place for the backrest.

IMG_7371.thumb.jpeg.a972c124944c1a964eea6f6a8beaadbe.jpeg

Or so I thought. The lines in the upper left corner show that the 1 1/2 tile orientation is incorrect. so remove the rope and all of the tiles and start over. Now, that’s better. Unfortunately, I did the same darn thing on the stool. Looks like I would learn! 
IMG_7381.thumb.jpeg.7f2dd892b791ffdd6196e06f18f3c7f2.jpeg

The tiles for the seat are in the drying rack after 3 coats of ARS so maybe tomorrow I can thread them into place and get close to the finish line. 

 

 

IMG_7373.jpeg

This is going to be an awesome chair! It looks so inviting and comfortable. I look forward to your review once complete :)

On 3/6/2025 at 8:25 PM, Coop said:

The lines in the upper left corner show that the 1 1/2 tile orientation is incorrect

You had my OCD going there for a little while. Glad you noticed quickly and corrected it.

  • Popular Post

Looking great, Ken!

Can I suggest for the next one (or 6), insert a bamboo skewer into the end of the rope before you melt & roll to a taper. Makes a built in hard needle. At about 1/8" diameter, and with the rope tapered to it, you should be able to thread through the tiles easily.

  • Author
  • Popular Post

I thought about the skewer but the only ones we have are for kabobs and they are too short. The needle needs to be at least 23” long to go thru both sides and the tiles at one time.

And rest assured, there won’t be another one! :D
I say that. I still have to make the tiles for the third stool.:huh:

  • Popular Post

Painters tape is nice and slick on the outside and sticks to rope well. It's also thin. I use it a LOT with fids on splicing UHMWPE rope or Dyneema rope. Just an FYI if any one is threading rope in the future.

Also as a side note the UHMWPE cord from Emma Kites on amazon is a great product the 1/8" cord is rated to 2,200 lbs. This is the same material as synthetic winch cord so comporable in strength to steel. For better or worse has minimal stretch. I tumbleded down a rope rabbit hole 6 months ago.

  • Author
  • Popular Post
On 3/6/2025 at 10:43 PM, wtnhighlander said:

Can I suggest for the next one (or 6), insert a bamboo skewer into the end of the rope before you melt & roll to a taper. Makes a built in hard needle. At about 1/8" diameter, and with the rope tapered to it, you should be able to thread through the tiles easily.

But, I bet a 1/4” dowel, sharpened on the pencil sharpener would work! Thanks 

  • Author
  • Popular Post

The 1/4” walnut dowel that I gripped about the cost, paid for itself when it became my new needle. The back rest is only 10” tall x 18” wide and pulling tension on it thru the sides and tiles was pretty simple with one rope. Each end was tied off with the brass bushings. As the seat is much larger at 18” wide and 18” deep, I decided to use two different ropes, one starting in the front and ending in the center and the other, starting in the back and ending where the first left off. That turned out well as I didn’t have to pull the tension on the rope throughout the full length, front to back. So four ends and four 1/4” brass bushings to cinch the rope. The results is a pretty darn comfy chair.

IMG_7382.thumb.jpeg.07bdd39ba2e62503ed8aae07b71fa858.jpegIMG_7383.thumb.jpeg.d5c4a358e212c3e81e4dd7efaa2d0fea.jpegIMG_7384.thumb.jpeg.b92dcce55fb19670352600d88cf3ab54.jpeg
 

And a pic with it’s feet rest.

IMG_7385.thumb.jpeg.2ee672c9e9a711ce07a890b9ec6996a5.jpeg

The lighting or lack of, shows the two as different shades but they are close alike. 
Well, that’s a wrap. Appreciate you guys for following along. 
One last pic is my third and last stool that I will crimp the rope on tomorrow.

IMG_7389.thumb.jpeg.bb2fbc46147528783343c2da3cd8b4e2.jpeg

  • Popular Post

Great job Coop. Lot of work put into those...and dare I say, a lot of patience.

Have someone take a pic of you sitting in one, with your feet kicked up...smoking a cigar and sipping a cocktail. And post it!:lol:

That thing is so freakin' cool.  I went back and re-read the article.  Great stuff.  Yours came out great.  Really impressive work.  Thanks for taking us along.

Nicely done! Now pat yourself on the back and get back to work! Damn good work! Thanks for sharing.

I'm not only impressed with the work, but with how quickly you got the project done.

  • Popular Post
On 3/11/2025 at 6:07 AM, Mark J said:

I'm not only impressed with the work, but with how quickly you got the project done.

Yeah, slow down.  Yer makin' us look bad.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Who's Online (See full list)

  • There are no registered users currently online

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.