Recommended Posts

Posted

I built a chisel rack that goes in the tool box or on the wall. I have a small bench, so I also have a 'one plane at a time' policy and a 'no more than two chisels at a time' policy. This since my #5 and 12mm chisel both fell off the bench (all on their own) in two separate occasions.

 

They're all at arm's length from the bench, so it's not too difficult to stay tidy and avoid the gravitational disadvantages.

 

John

  • Like 1
Posted

Mine are in rolls, some leather, some canvas, inside waterproof toolboxes.  12 oz. mallet in the box with the regular chisels.  30 oz. mallet in the box with the large chisels.  Chisels don't get put back in their roll unless they are sharpened.  Ones that need sharpening are in the tray in the top of each toolbox.  This leaves plenty of sharp ones, and the ones that need sharpening all get it at once when the time is right.

Posted

Do the sliding dovetails keep it more secure than a French cleat?

 

Yep

A french cleat can lift off the wall, the only way to get my racks off the wall is to slide them all the way to the end of the dovetail. I wanted that little extra bit of safety.

Posted

In the plastic blister pack I bought them in, with the edges trimmed off on three sides so it can open and close.  That goes into a drawer in my tool chest ... when I actually put them away.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.