Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

What do you finish your cutting boards with?

Featured Replies

Usually I just wipe them down with food grade mineral oil. However I've been thinking about doing the double boiler, warm the mineral oil and melt beeswax into it and stir it up together and then use that as the finish. It will add a bit more durability and water resistance.

 

Thoughts?

I've only made one, but used Watco Butcher Block.  It's more of a wiping varnish with a (poly?) resin, unlike the other butcher block oils out there (which I understand are just mineral spirits)

 

First coat goes on like Danish Oil (wipe on wipe off).  Second coat goes on like arm-r-seal. Really builds up thick.  Nice semi-gloss finish.

 

Been holding up so far, knife marks but nothing unexpected.  Cleans up very nice with soap and water.

post-15261-0-50401100-1417618655_thumb.j

+1 on salad bowl finish.  I used Marc's method; it works great and requires zero maintenance.  

I've only made one, but used Watco Butcher Block.  It's more of a wiping varnish with a (poly?) resin, unlike the other butcher block oils out there (which I understand are just mineral spirits)

 

First coat goes on like Danish Oil (wipe on wipe off).  Second coat goes on like arm-r-seal. Really builds up thick.  Nice semi-gloss finish.

 

Been holding up so far, knife marks but nothing unexpected.  Cleans up very nice with soap and water.

just don't pass out and land on that finish support.  that actually is pretty cool

  • Author

I've only made one, but used Watco Butcher Block.  It's more of a wiping varnish with a (poly?) resin, unlike the other butcher block oils out there (which I understand are just mineral spirits)

 

First coat goes on like Danish Oil (wipe on wipe off).  Second coat goes on like arm-r-seal. Really builds up thick.  Nice semi-gloss finish.

 

Been holding up so far, knife marks but nothing unexpected.  Cleans up very nice with soap and water.

 

The real question is, what kind of beer is in that glass?

The real question is, what kind of beer is in that glass?

 

Warsteiner from the keg.

 

And yes, the beverages only show up in the shop when the motors stop running.

  • Author

Vinny,

 

Don't you worry about all the nails in the back of your project creating little dents in the wood? The steel of the nail is harder than the wood. Why not use plastic or painters pyramids?

General finishes salad bowl oil or usually I use Howard Butcher block conditioner. I've used costco mineral oil in the past but I like the workability and sheen more of the Howard conditioner . I was wondering about the same thing cancel with the nails. I've had painters pyramids leave tracks (albeit tiny) in hardwood I would think nail ends would do worse.

Vinny,

 

Don't you worry about all the nails in the back of your project creating little dents in the wood? The steel of the nail is harder than the wood. Why not use plastic or painters pyramids?

 

Same reason you can sleep on a bed of nails I suppose.  It's a mass and surface area issue.  Plus, they're not pointy.

 

My work tends to slide around, even if just a little bit, on the pyramids leaving streaks.  Not a big fan.

 

Mostly, I use these for parts that don't have a lot of mass.  There's just not enough gravity force to create dents.  No issues on pine either.  It's soft, but just not heavy enough.

Wood Man needs to slow down on the beer...based on all the finish spilled over the nail-board. Must of been 2 cutting boards resting on the nails   :P  :P  :P  ;)

 

-Ace-

Vinny,

 

Don't you worry about all the nails in the back of your project creating little dents in the wood? The steel of the nail is harder than the wood. Why not use plastic or painters pyramids?

 

Not a worry...I use nail-boards all the time. The sharper the nails the better, nearly impossible to fine the little "prick" in the finish. My go to, are small wood blocks with a single sharp wood screw through the center. You can position them anywhere on the piece.  

 

-Ace-

The sharper the nails the better, nearly impossible to find the little "prick" in the finish.

-Ace-

 

Not impossible, if you look close you can see my reflection in the gloss.

Not impossible, if you look close you can see my reflection in the gloss.

 

Now thats funny!!!!!!!!! :)  

 

-Ace-

mineral oil is all i use for cutting boards.  works great, looks great, is easy to apply, food safe, and is easy to refinish.  win x 5!

I'd probably only use mineral oil on my own boards because you have to maintain it pretty regularly, and if I make a board for a gift I really don't want to give too much 'work' along with it.  salad bowl finish is great and doesn't build a film if you apply it properly, and it needs very little maintenance.  mineral oil is really nice though, and IMO the best way to apply it is to soak the board in a vat of mineral oil for a day or so then take it out, wipe it down until you've removed all the excess, and let it cure for a few days. after that, even if you use the board a lot the only real maintenance you need to do is a quick rub down with more oil maybe monthly or so.  perhaps a light sanding and then oil every few months. 

I've only made one, but used Watco Butcher Block.  It's more of a wiping varnish with a (poly?) resin, unlike the other butcher block oils out there (which I understand are just mineral spirits)

 

First coat goes on like Danish Oil (wipe on wipe off).  Second coat goes on like arm-r-seal. Really builds up thick.  Nice semi-gloss finish.

 

Been holding up so far, knife marks but nothing unexpected.  Cleans up very nice with soap and water.

did you sand in between coats? I also have read the smell lasts a pretty long time?

Light scuff only - 320g

No smell at all (and I have really good smell...seriously)

not talking about your cologne or after shave I hope :ph34r:

I'd probably only use mineral oil on my own boards because you have to maintain it pretty regularly, and if I make a board for a gift I really don't want to give too much 'work' along with it.  salad bowl finish is great and doesn't build a film if you apply it properly, and it needs very little maintenance.  mineral oil is really nice though, and IMO the best way to apply it is to soak the board in a vat of mineral oil for a day or so then take it out, wipe it down until you've removed all the excess, and let it cure for a few days. after that, even if you use the board a lot the only real maintenance you need to do is a quick rub down with more oil maybe monthly or so.  perhaps a light sanding and then oil every few months. 

 

Can you (or anyone) explain what is meant? Simply following the directions, not applying too many coats, what?

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,009 Total Members
  • 3,644 Most Online
  • Joseph b Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.