Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Table saw blades??? Is the Woodworker II worth the $?

Featured Replies

I am a true hobbyist in the sense that I have never sold one project that I have made. I am looking to upgrade my table saw blade from the cheap Black & Decker Piranha 32t blade that is on it. I can't justify the purchase as a business expense, as I do not run a woodworking business. As one who simply loves the craft, is the expense of a high quality blade worth it? I have a Jet 1 1/2 hp contractor saw and the motor tends to heat up and trip the breaker when I'm cutting anything harder than pine. Is that the result of a bad blade or is the saw just weak? I bought the saw used, so I don't know how much abuse it's taken, but it seems to be in pretty good shape. I have heard and seen many who swear by the Forrest blades. Will I truly see a difference if I upgrade to one? I'm planning on a larger project and I'm hesitant to begin because I just know the saw will struggle through the 8/4 material I will be using. I would love to hear the perspective of someone who has experienced the difference between a cheap blade and a quality blade.

Thanks, Mike

  • Replies 53
  • Views 15.2k
  • Created
  • Last Reply

Top Posters In This Topic

Most Popular Posts

  • It was actually an experience with a poor quality blade that prompted what some would consider an unusual obsession with saw blades... it just really ticked me off that it was no better than a stock b

  • A link belt won't take a set like a standard v-belt can, which can cause thumping and vibration.   They're very smooth running.  They can stretch a little over time, but the pressure from the outboard

  • And you might consider a thinner blade!  They work better on under powered saws.

Posted Images

I had a couple of Forrest blades back 10- 15 years ago. They do cut better, but they need to be kept sharp. I have learned that Freud blades with frequent cleaning stay sharp and cost less. The key is frequent cleaning ! Resin build up leads to heat and dullness ! Clean well and often !

  • Author

I had a couple of Forrest blades back 10- 15 years ago. They do cut better, but they need to be kept sharp. I have learned that Freud blades with frequent cleaning stay sharp and cost less. The key is frequent cleaning ! Resin build up leads to heat and dullness ! Clean well and often !

Thanks Steve. I have never cleaned the blade, although I have watched Marc's video podcast regarding just that... I should probably heed the advice of experts and clean my blade!

Thanks Steve. I have never cleaned the blade, although I have watched Marc's video podcast regarding just that... I should probably heed the advice of experts and clean my blade!

    And you might consider a thinner blade!  They work better on under powered saws.

    And you might consider a thinner blade!  They work better on under powered saws.

+1 on thinner kerf blade

http://www.thewoodwhisperer.com/articles/which-saw-blade-should-i-buy

Here's a discussion that should help.

When I had a 1 1/2hp Craftsman saw I found that a good quality thin kerf carbide blade worked very well.

http://www.rockler.com/1-2-power-twist-plus-link-v-belt

This belt is also something you should consider.

It was actually an experience with a poor quality blade that prompted what some would consider an unusual obsession with saw blades... it just really ticked me off that it was no better than a stock blade, and it cost a fair penny at the time.  From that point on I ventured off on my own to find out why some blades were better than others.  Somewhere around 70 blades later, I've tried most of the more common blades.  Brand names mean very little to me at this point.... It's the design and construction that matter.  You and your saw both deserve a better blade! 

 

It shouldn't be hard to find a blade that will do notably better than your Piranha 32T.  Some of the difference you will notice will depend on the saw's precision, the material, and your technique....the more precise the blade, the more those variables can mask it's performance.  With that said, I wouldn't advocate spending $125+ on a  WWII, even though it's a really nice blade.  Comparable, and arguably better performers (in some areas) can be found with the Ridge Carbide TS2000, Freud Fusion, Infinity Super General, and Tenryu Gold Medal...all for in the range of $90 or less.  High quality dedicated task specific blades will eclipse any of those blades if used within their intended ranges.  Starting at ~ $30, the Irwin Marples series, Freud Diablo series, CMT ITK Plus series, Oshlun, DeWalt Precision Trim series, and the Delta 35-7657 40T are extremely competitive for the price.  The key is better precision in the manufacturing, better steel, better carbide that holds an edge longer, better design, better sharpening, better balance, etc.  If you avoid blades from Workforce, DW construction series, Oldham contractor series, Ryobi, Avanti/Avanti Pro, HF, most Craftsman, Irwin Marathon, Irwin Classic, Skil, Vermont American, and other off names, you should be pleasantly surprised.  

 

Tips for Picking Saw Blades   A List of Bargain Saw Blades

 

Clean your blades often...a dirty blade performs like a dull blade, and leads to premature dulling due to excess heat.

I can attest to the Irwin Marple 50T combo from Lowes being an excellent performer at a low cost. Leaves glassy-smooth cuts on my old Ridgid saw. It isn't a thin kerf, so I do have to watch feed rate when cutting thick hardwoods, but I've never bogged it down unless the wood reacted and pinched the blade.

I picked up a Trend 48 tooth combo blade at woodcraft in clearance for $22 marked down from $50. I also have a freud 80 tooth blade that I use for cross cuts and plywood. The Forrest blades are great, as are the Freud blades. A quality blade is important, I used to have a Jet 1.5 HP contractor saw, I went with a thin kerf freud blade for better performance in cutting harder materials. If you want an all around blade check out the Freud Fusion Thin Kerf 40Tooth. If you wanna strengthen it up since it's a thin kerf blade, spend 20 bucks and get a blade stiffener. 

My only complaint with my WWII's is that they seem to build up pitch differently and more quickly than others, so they need to be cleaned more often to prevent burning maple and cherry.   A busy local WW school stopped using them, switching the "normal" blades to Ridge, as the buildup was causing problems for them.  It's not been a problem for me, as I have a habit of placing blades in a 5 gallon lid and spritzing them with cleaner when they come off the saw. 

 

I can get them locally for ~ $89-$92, and they seem to be able to take a lot more sharpenings than others, so I keep buying them.   I like the Freud Industrial blades, too, especially their "Thick Stock Rip", but the price difference isn't huge at my local tool shop.

For cleaning pitch I use warm water and orange citrus cleaner and put my blade in a plastic planter tray and let it soak for 20 or so minutes, then jut brush each tooth with a medium bristle toothbrush. Dry it off, hit it with the hair dryer to make sure the entire blade is dry before reinstalling. 

The key is frequent cleaning ! Resin build up leads to heat and dullness ! Clean well and often !

Clean your blades often...a dirty blade performs like a dull blade, and leads to premature dulling due to excess heat.

 

How often is often?  I always see "clean often" but what does that really mean?   Obviously it depends on the type of cut, materials used, etc, but can you give a reasonable guideline like "if I use a blade to break down X sheets of ply, I'd clean it afterwards" or "if I use a blade to rip roughly X feet of Y wood, I'd clean it".    I normally clean when I notice the brownish/orangeish/whateverish stuff on the sides of the teeth which I assume is the pitch/resin/glue/whatever building up...but I never know if I'm doing it more often than necessary or waiting too long.

I will say I have never cleaned a saw blade.  I have a number of WWII blades and a pile of Royce Ayr p17's both are good blades. I did buy an Infinity dado blade and really have to say it was one of the worse ideas I've had in a long time. The P17's are Royce Ayr's small shop and hobby line and go for about $45 and perform about the same as a WWII. They do have a better line but those are targeted toward industrial factory type use. 

Cleaning frequency is a variable that's tied to usage and material.  I clean anytime I give a blade heavy use...at the very least after each project, but often sooner than that.

I have the same Jet saw.
Chunk your existing blade and go for a Freud thin kerf. After you've tried a Freaud, you'll never go back (or something like that :unsure: )

 Rockler has several types, all under $100. And like others have said, keeping them clean is a must.

Cleaning frequency is a variable that's tied to usage and material.

 

I assume ply/MDF/etc are worse than solid wood because of the glue or whatever holds them together?   I also assume oily or sappy wood species are worse?

  • Author

http://www.thewoodwhisperer.com/articles/which-saw-blade-should-i-buy

Here's a discussion that should help.

When I had a 1 1/2hp Craftsman saw I found that a good quality thin kerf carbide blade worked very well.

http://www.rockler.com/1-2-power-twist-plus-link-v-belt

This belt is also something you should consider.

Pete,

I actually have that belt. It was on the saw when I got it. What are the advantages of that belt over a standard belt?

  • Author

Thanks for all the input. You have all been a great help. This is an amazing forum.

Pete,

I actually have that belt. It was on the saw when I got it. What are the advantages of that belt over a standard belt?

 

A link belt won't take a set like a standard v-belt can, which can cause thumping and vibration.   They're very smooth running.  They can stretch a little over time, but the pressure from the outboard motor will compensate for that...just check the motor position now and then, and remove a link or two as needed to be sure the motor doesn't sit too far down.

+1 for the link belt. I had replaced the one on my old Jet contractor saw, it made it run much smoother, much quieter and with less vibration.

I assume ply/MDF/etc are worse than solid wood because of the glue or whatever holds them together?

 

Nope, I don't think it's the glue...   The glue may dull an edge faster, but I haven''t seen it create more buildup.  In my experience, you'll need to clean more often if you use lots of maple and cherry, and maybe white oak, as they seem to burn more easily than other species, especially since you're more likely to be cutting an edge that will show.     Of course, switching to a low tooth count rip blade really helps.

I usually clean a blade when I see any resin building up, or if I'm changing blades. Of course I cheat and get my helper to do it most of the time. All of this applies to router bits as well !

I use Bostick's spray on blades and the bearing lube after I clean and dry. I like the stuff ,but some folks disagree , that's fine, it works for me!

I remember that I cleaned a blade once, but I don't remember when it was, or how I did it.  I like the WWII's just fine, but have others that also work well.  I use cheap blades for rough cuts, and save the good blades for when it matters.

I have diablo blades from HD, on both my chop saw and table saw. I think they both perform reasonably well.

I remember that I cleaned a blade once, but I don't remember when it was, or how I did it.  I like the WWII's just fine, but have others that also work well.  I use cheap blades for rough cuts, and save the good blades for when it matters.

 

Im the same way. I think if your getting loads of build up on blades with hardwood then its generally a heat issue causing the wood to bleed. Not enough power, feed rate, fence alignment or just a dull blade something along those lines anyways will cause wood to burn or gum up a blade. For general woodworking with hardwoods and plywood a blade should need cleaning right about the time it needs sharpening. 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,011 Total Members
  • 3,644 Most Online
  • bobtjanitor Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.