Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Shop pics of an evening/weekend hobbyist

Featured Replies

  • Popular Post

Here are some pictures of my two car garage shop. My wife has never parked her car in a garage before, so when we moved here it was easy to call dibs on the garage. Around half of the big tools are Craigslist finds. The lathe is the most recent addition, and I just did the cleats in December. 

 

IxoqXXN.jpg

 

lkJEps7.jpg

 

mGeBjk8.jpg

 

GKwvPtn.jpg

 

BXdMPKl.jpg

 

WGURYaF.jpg

 

XsubLMw.jpg

 

TPpUjZ8.jpg

That's one impressive shop! It looks like you have all the big tools purchased. What's next on the list? I ask because the list never ends.

  • Author

Thanks guys. It's a nice place to be. I'm in IT and have found woodworking to be the creative hands-on outlet I need. 

 

 

That's one impressive shop! It looks like you have all the big tools purchased. What's next on the list? I ask because the list never ends.

 

I am building the split-top roubo bench now. That's what the lumber on the ground is for, and the vise hardware on the outfeed table. you guys want to follow along. There's actually a couple others starting now or soon in there too.

 

The only "big" tool I still want (for now!) is a drum sander. I need to figure out the logistics of how I'd use it first. I can't think of anywhere that I'd be able to have it setup permanently, so that leaves putting it on a mobile base and also figuring out how I can easily/quickly tap into my DC ductwork. Speaking of that, I need to modify the ductwork and put a drop on the wall with the lathe and disc/belt sander. I'm sure that will be fun.

 

Of course there are smaller tools that I want to get into as time goes on... I don't have much in the way of hand tools right now. 

Brandon, great looking shop. I like the cleats.

Great looking shop! I too find woodworking is a nice way to leave the software development world.

Man very nice . Love the setup. If you go with. Drum sander I am stuck in a passionate love affair with my supermax 19-38

Great shop!!  Very neat and well arranged.  And a nice stack off lumber!  What's on the drawing board??

Looks great! Would love to see some more hand tools in the pics ;)

What is the tall square thing by the door ?

Door stop

Nice shop Brandon! Looks like you have everything very well laid out. What size is you garage?

  • Author

Sweet shop!!

How do you like your grizzly jointer? What model?

 

It's one of my used CL finds, I bought it off a guy along with the planer for a steal. I have the G0490 and upgraded from an old 6" small jointer. Love the 8" capacity, long bed (6'), and the parallelogram setup. No complaints other than of course it's not a bigger jointer  ;)

 

What is the tall square thing by the door ?

 

That is the last thing I've not managed to get expelled from my shop... a shoe rack. You'd wonder why my wife and kid would need it since they just leave their shoes on the ground, but it turns out they have a lot of "outside" shoes that they use enough to need at hand (read: once in a blue moon, when their other pairs on the ground are missing.)  :lol:

 

Great shop!!  Very neat and well arranged.  And a nice stack off lumber!  What's on the drawing board??

 

The split top roubo build is first and it's what that lumber is destined for. I want to build a rolling cabinet/stand thingy for my miter saw to reduce its footprint a bit and catch most of the dust that gets dumped on my sheet goods. Then a few smaller shop improvements... I need to mount the grinder and sharpening jigs to the other side of the flip top stand I have made for my Rigid sander, make a rack for lathe tools on the side of the cabinet of drawers that my big belt/disc sander is on, run a DC drop to that wall for that sander & lathe, put a mobile base on my bandsaw, etc... the list never ends  :)

 

Nice shop Brandon! Looks like you have everything very well laid out. What size is you garage?

 

Thanks. It is about 19x20 ish with a tad above 8' ceilings.

  • Author

Damn that's a good looking router table! I love it.

 

Thanks. It was actually one of my first projects. It's a Norm Abram's style, based on these plans.

 

Nice! Design looks very efficient. What's the size of your shop?

 

~19x20x8.

Damn that's a good looking router table! I love it.

I like it too.  I'd like to build one like that one when I move into my bigger shop.

Thanks. It was actually one of my first projects. It's a Norm Abram's style, based on these plans.

 

 

~19x20x8.

Mine is 24 x 20 with no where near that much organization. I need to re-evaluate or simply throw some S*#t away

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,009 Total Members
  • 3,644 Most Online
  • Joseph b Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.