Popular Post Rapid Roger Posted April 1, 2015 Popular Post Report Posted April 1, 2015 Here is a keepsake box that I just finished for my daughter. Hadn't posted in the project section for awhile. Hope you like it. Rog April Fools! 4 Quote
Immortan D Posted April 1, 2015 Report Posted April 1, 2015 Ha! Makes a good safe, no one will dare touch that thing. Quote
wouldwurker Posted April 1, 2015 Report Posted April 1, 2015 I love the exposed kreg jig joinery. It's like leaving the scribe line on a hand-cut dovetail. The mark of a true craftsmans 1 Quote
davewyo Posted April 1, 2015 Report Posted April 1, 2015 Nicely done! I particularly like the attention to fine details and the Grosso hardware. Is that from a FWW plan or is it one of your own designs? Quote
woodbutcher74 Posted April 1, 2015 Report Posted April 1, 2015 Hopefully your esty is posted next to the guy with the coasters. 1 Quote
RichardA Posted April 2, 2015 Report Posted April 2, 2015 There is some strange air in Kansas toto! Quote
Rapid Roger Posted April 2, 2015 Author Report Posted April 2, 2015 Actually, I made this a few years ago for an "Ugly Box" contest....... I came in second. I got two demerits (#1 "It's too square" and #2 "The plywood top was obviously cut on a table saw instead of with a hand saw.") Well, like Momma always said, "Ya can't win them all." It's always something! Rog Actually, I can make a decent looking box from time to time. This one brought $70.00 at a silent auction a while back. Quote
wouldwurker Posted April 2, 2015 Report Posted April 2, 2015 Actually, I made this a few years ago for an "Ugly Box" contest....... I came in second. I dated the girl that came in first 2 Quote
bgreenb Posted April 2, 2015 Report Posted April 2, 2015 I dated the girl that came in first I laughed out loud at this Quote
bgreenb Posted April 2, 2015 Report Posted April 2, 2015 Actually, I made this a few years ago for an "Ugly Box" contest....... I came in second. I got two demerits (#1 "It's too square" and #2 "The plywood top was obviously cut on a table saw instead of with a hand saw.") Well, like Momma always said, "Ya can't win them all." It's always something! Rog Actually, I can make a decent looking box from time to time. This one brought $70.00 at a silent auction a while back. Very nice. Did you shape the sides after glue up? Use a sander? Quote
Janello Posted April 2, 2015 Report Posted April 2, 2015 I dated the girl that came in first Trophy wife.....Second place.....2 people in contest. Quote
Immortan D Posted April 2, 2015 Report Posted April 2, 2015 Very nice. Did you shape the sides after glue up? Use a sander? I too wanna know. Quote
Popular Post Rapid Roger Posted April 2, 2015 Author Popular Post Report Posted April 2, 2015 bgreenb and Daniel, Yes, I built the box using mitered corners with splines in the usual manner. Then I ran each side over the table saw blade at and angle like you do with any cove. It still required a lot of sanding to get the saw marks smooth. This was my third try with cove cutting. I made two more by cutting the cove first in the board before turning it into a box. These are urns so the tops are permanent and the bottoms are screwed on. Rog 3 Quote
wtnhighlander Posted April 2, 2015 Report Posted April 2, 2015 Roger, how thick were those boards to start? Quote
TerryMcK Posted April 2, 2015 Report Posted April 2, 2015 Great work on the second and third boxes Rog. I see it was April Fools day yesterday when you posted the 1st one. Quote
Rapid Roger Posted April 2, 2015 Author Report Posted April 2, 2015 Roger, how thick were those boards to start? They were 3/4" thick. If you slowly work the blade up (1/6" at a time) you can remove 3/8" of material and still have a 3/8" thick wall on the box. Rog Quote
bgreenb Posted April 3, 2015 Report Posted April 3, 2015 Didn't even think of the table saw. Very clever! Quote
ColinF Posted April 4, 2015 Report Posted April 4, 2015 Actually, I made this a few years ago for an "Ugly Box" contest....... I came in second. I got two demerits (#1 "It's too square" and #2 "The plywood top was obviously cut on a table saw instead of with a hand saw.") Well, like Momma always said, "Ya can't win them all." It's always something! Rog Actually, I can make a decent looking box from time to time. This one brought $70.00 at a silent auction a while back. Personally I liked the original post better, just sayin' Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.