Recommended Posts

Posted

Sorry, can't help it!

New shop gloat too! Can't wait to cut into this baby...

Any tips on making the overarm dust collection work better? I heard it can sometimes not be the greatest, but it was free so...

Posted

My overarm collector works fine.  I hook it up to a shop vac (actually a festool CT26) and it does a nice job with the fine dust.  I connect the 4" under table port to my DC.  

Posted

Any tips on making the overarm dust collection work better? I heard it can sometimes not be the greatest, but it was free so...

I watched a video review a while back on youtube, Matt's basement workshop did a couple of reviews on the SawStop and on there he gave a couple of tips he had learned about in regards to the dust collection.

 

You will enjoy that saw. :D  :D  :D

Posted

Congrats! You will love it! My overarm dust collection works amazing. Almost all the dust gets collected IF it is not a cut on the edge of a piece. The clear plastic piece on the sides on the blade guard needs to be able to properly sit on either side of the cut on the wood. If that happens it works perfectly if not it shoots back at you.

Posted

The saw that's been in my shop the past...15? years or so had no riving knife, no blade guard, no dust collection, etc etc. I'm sure any collection is better than what I've used, but I'm just wondering what to expect. Some people expect a white glove test afterwards, which isn't really where I'm at...

 

Now to build a monster outfeed/side table for it.  I think the outfeed part is going to be a MDF torsion box, laminated with arborite, about 44" deep. The side extension table is going to be a solid laminated top with some dog holes and a couple vises...should be interesting! My only worry is having dog holes on the top, since most of my money making work is ripping sheet goods.

Posted

Jealous.  Still waiting to hear when mine will arrive.  Which fence did you go for?

52" T-glide... Most of my professional work involves lots and lots of sheet goods, and ripping right near 48" is very common.

 

Put glidecote on the top, first time using it... Not sure if I like it, or if I just applied wrong. It's a little "spotty" even after buffing. MIght use some wax.

Posted

Hit it again w the GlideCote a few times before you give up. I use it on the fence face and the table. Router bases and router table get it as well. It can take a couple of coats on a raw surface to fill In well . I spray it on liberally, let it dry for 10-15 minutes then buff off the excess w a rag.

Do we get pictures of your new saw ?

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Who's Online   2 Members, 0 Anonymous, 42 Guests (See full list)

  • Forum Statistics

    32.1k
    Total Topics
    437.6k
    Total Posts
  • Member Statistics

    26,008
    Total Members
    3,644
    Most Online
    Bob44
    Newest Member
    Bob44
    Joined