Pete Staehling Posted June 20, 2015 Report Posted June 20, 2015 Not sure if "Off Topic" is the right place for this or not, but I was wondering what other woodworking forums there are that I might read in addition to this one? I enjoy this forum, but find it to be quite a bit more high end tool oriented than I would prefer. I tend to have a "good enough is good enough" attitude when it comes to tools. I am not the kind of guy who is ever going to buy anything Festool or a $200 framing square. I am never going to obsess over a little staining on my cast iron. Basically what I am wondering is what forums are there, if any that have a more down to earth focus. So far I have been reading/posting here, Sawmill Creek, and Lumberjocks, but I wonder if I am missing any good places to hang out that would suit my personal preferences a bit better. Pete Quote
Popular Post Eric. Posted June 20, 2015 Popular Post Report Posted June 20, 2015 Uh... There isn't a more "down to earth" woodworking forum that exists. Not sure I get your aversion to people who like buying nice tools. Don't buy them if you don't want to. This place is about exchanging information...you can do with that whatever you like with whatever tools you have. No one admonishes anyone for not having high-end kit. I read LJ fairly frequently but I don't participate because I don't care for the vibe over there. Sawmill Creek tends to feel more Scott Phillips to me. Maybe that's what you're looking for. If you strictly want to hang out with people who use cheaper tools (that sounds weird both in theory and in speech)...try a DIY forum I guess. 3 Quote
Llama Posted June 20, 2015 Report Posted June 20, 2015 Not sure how to approach your post Pete... I've never focused on the cost of a tool someone was using to accomplish a certain task. Instead, I read and participate in this forum to gain knowledge and share my experiences. 1 Quote
Popular Post ..Kev Posted June 20, 2015 Popular Post Report Posted June 20, 2015 It's actually my favorite thing about this forum is that it doesn't matter what your tool list is. Yes, we exchange information about tools that can make tasks faster and, sometimes, better but, in the end we try to support anyone making sawdust. At the same time, I think most of us enjoy seeing people get that fancy stuff and share in their excitement. There's room here for everyone. 4 Quote
Pete Staehling Posted June 20, 2015 Author Report Posted June 20, 2015 Thanks for the replies. Just to be a bit more clear, let me add that I do enjoy this group and find it a wealth of information. I never said I want to "strictly want to hang out with people who use cheaper tools". I just wondered if there were other forums less focused on the higher end tools that still had good information. Truth be told, I like the vibe, on both LJ and SC, but freely admit that I find more useful information here. I struggled with how to word my request without sounding too critical of this forum, perhaps I failed in that effort I enjoy this forum a lot and find it very useful. 1 Quote
Popular Post wtnhighlander Posted June 20, 2015 Popular Post Report Posted June 20, 2015 Wish I could offer another suggestion, but LJ and SC are the only other forums I am familiar with. For what it's worth, my tool kit is full of Harbor Freight 'junk' and Craig's list finds. There was a video making the rounds a while back, about some guy in Ethiopia or some place like that, that supported himself by selling furniture he built with his feet, because his hands were parylized. After I saw that, and the very limited tool kit he had available, I decided that I had no business allowing myself to be limited by my tools. It doesn't matter what tools / skills the others here posses, this has been the best place I have found to learn and share. 3 Quote
Pete Staehling Posted June 20, 2015 Author Report Posted June 20, 2015 Wish I could offer another suggestion, but LJ and SC are the only other forums I am familiar with. For what it's worth, my tool kit is full of Harbor Freight 'junk' and Craig's list finds. It sounds like I may not be missing much since I already read and post here, LJ, and SC. I can relate to having Harbor Freight and Craigslist stuff. I own a few Harbor Freight tools that I actually like and do not find that they limit my ability to do quality work. I have had a few duds from Harbor Freight as well though. My big tools are brand name, but definitely not Festool and my 14" Delta bandsaw was from craigslist. I like that my woodworking pays for my tools and materials and shows a profit. Quote
Popular Post Eric. Posted June 20, 2015 Popular Post Report Posted June 20, 2015 Also worth noting...the "high-end" tools that some of us have are really just hobbyist high-end. The tools used in the industry make Festool look like Walmart buddy brand. Just ask Don. 4 Quote
Trip Posted June 20, 2015 Report Posted June 20, 2015 If you think LJ's can be a bit edgy -- check-out some of the UK forums... http://www.ukworkshop.co.uk/forums/ http://www.woodworkuk.co.uk/forum/viewforum.php?f=4 http://www.woodworkingtalk.com/ And of course: http://forums.finewoodworking.com/ Quote
ColinF Posted June 20, 2015 Report Posted June 20, 2015 Don't blame us if you feel insecure with your "tools" honestly most of my tools are low end stuff from menards or lowes, I inherited some of it from my dad, some of it I bought. I'm pretty proud of my generic, underpowered 14" bandsaw, it resaws like a champ with no drift and smooth cuts. It only cost $300 bucks, so don't worry about your tools bro, nobody cares if it's not high end. Quote
Immortan D Posted June 20, 2015 Report Posted June 20, 2015 I don't own no Festools and I'm happy here. It's a great community. 1 Quote
JerrySats Posted June 20, 2015 Report Posted June 20, 2015 http://www.forums.woodnet.net/ubbthreads/ubbthreads.php?Cat= This is a great forum and very active , the tool swap is one of the best I found aside from the Creek . Quote
Pete Staehling Posted June 21, 2015 Author Report Posted June 21, 2015 http://www.forums.woodnet.net/ubbthreads/ubbthreads.php?Cat= This is a great forum and very active , the tool swap is one of the best I found aside from the Creek . Thanks. I had not seen that one. I'll check it out. Quote
Pete Staehling Posted June 24, 2015 Author Report Posted June 24, 2015 http://www.forums.woodnet.net/ubbthreads/ubbthreads.php?Cat= This is a great forum and very active , the tool swap is one of the best I found aside from the Creek . Jerry, Since I read this I have been reading that forum, but have had no luck joining. I tried joining last weekend, but never got the email confirmation. I checked my spam folder, no dice. A few days ago I used their web form to ask for assistance, again no response, then I emailed them this morning and am still waiting. I know that my info got recorded because when I try to log in it says that the account exists, but has not done the email confirmation process. Do you know if they are having problems or the moderator is away or something? Pete Quote
Tom Cancelleri Posted June 25, 2015 Report Posted June 25, 2015 Pete, The quality of craftsmanship far outweighs the tool used to get there. While yes some tools can help you get the outcome you're looking for easier or faster, it doesn't discount quality. I've seen people make incredible pieces using some real basic tools. Also keep in mind a lot of people see buying new tools as an investment in the hobby that they won't have to reinvest in. My mom's cousin has been using a Rockwell unisaw that his dad owned in the 40s. If my Jet lasts that long I'd be amazed. Be comfortable with what you have, and build as you see fit. Quote
Pete Staehling Posted June 25, 2015 Author Report Posted June 25, 2015 Be comfortable with what you have, and build as you see fit. That is good advice that I try to live by. Thanks. Quote
pghmyn Posted June 25, 2015 Report Posted June 25, 2015 Be comfortable with what you have, and build as you see fit. I don't think there is a better way to say it. There are people who will spend hours perfecting their dovetail pins and tails with chisels, and there are those that will be ok with filling a gap with some sawdust and glue then call it good. Doesn't mean you are less of a woodworker, but we all have our priorities. The main reason I enjoy this forum is because of the community that has developed. Never have I felt shunned because someone did something better than me. I have also never received the vibe that someone is rubbing in their tool collection to me like they are better. We all come from different backgrounds, but we all have woodworking in common. The most respectable and admirable part about everyone here is that you all stretch and exercise your creativity to do something that not everyone can do. Whether it is in a 100sqft basement shop with just a saw, plane, and chisels...or a 1800sqft stand alone shop with tools acquired over the years. 1 Quote
wdwerker Posted June 25, 2015 Report Posted June 25, 2015 I like that if you have an odd or interesting but difficult situation to deal with you get so many different view points suggesting ways around it. Sometimes pretty quickly too. Great span of expertise in experience too. Hand planes and epoxy are not my strongest points but the answer is here, especially if you search the subject before posting a question ! Quote
Gilgaron Posted June 26, 2015 Report Posted June 26, 2015 Disclaimer: I'm a moderator there I also post at Woodworkingchat.com Richard, the owner/admin, started that after new ownership at Woodworkingtalk (and LJ) added lots of ads and started alienating users. He complained, got 'fired' along with the rest of the moderators. So he set up a new forum and people that hadn't been banned yet invited over folks from WWT. Since then I believe WWT has been sold and bought again so perhaps it is better than it was when we left. Since it is relatively new and not high on the search engine results we don't get a large number of new people, so it is a relatively slow paced forum. Quote
JerrySats Posted June 27, 2015 Report Posted June 27, 2015 Jerry, Since I read this I have been reading that forum, but have had no luck joining. I tried joining last weekend, but never got the email confirmation. I checked my spam folder, no dice. A few days ago I used their web form to ask for assistance, again no response, then I emailed them this morning and am still waiting. I know that my info got recorded because when I try to log in it says that the account exists, but has not done the email confirmation process. Do you know if they are having problems or the moderator is away or something? Pete Pete have you tried logging in ? You should get an email within a few mins of submitting your info . I just setup another one and it went right through . Maybe try doing another account ? Quote
Popular Post G S Haydon Posted June 27, 2015 Popular Post Report Posted June 27, 2015 Pete I think I know what you meant with your post. There a three forums I read regularly. This one, Sawmill Creek and UK Workshop. I don't worry too much about the bickering that sometimes happens on some forums. Beneath the odd lively thread there can be some good info. Facebook has some woodworking groups but they tend to be very fast moving. Good for ideas and looking at pictures. Instagram even better for pictures. I think I understand your position on tools. I don't give it a thought because I'm happy with what I have. My thoughts would be to look past the tools in the hand and look at what they are doing with it. No tool, no matter the cost has free will. We have to direct them. Within reason the right tool for the job from decent brands, power or hand, will turn out a decent job. Take Marc, he has a set of Irwin chisels on the wall next to some Lie-Nielsen saws. Both brands are good. 3 Quote
Pete Staehling Posted June 27, 2015 Author Report Posted June 27, 2015 Pete have you tried logging in ? You should get an email within a few mins of submitting your info . I just setup another one and it went right through . Maybe try doing another account ? They lost a key IT guy and things were not working correctly. I called them on the phone and they got it sorted for me. Quote
Pete Staehling Posted June 27, 2015 Author Report Posted June 27, 2015 I also post at Woodworkingchat.com I am liking that one. It is nice to have a variety of woodworking forums to read and post on. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.