Brendon_t Posted July 2, 2015 Report Posted July 2, 2015 Busting the gear on my drum sander drive motor and being without one has made me realize how very much I relied on that thing. I'm needing to thin some stock down to thickness as splines for boxes. I'm about to make a deal with the devil and give up a toe for the replacement gear. . Quote
..Kev Posted July 2, 2015 Report Posted July 2, 2015 Time to become a knuckle dragger and get those hand planes out. Quote
Brendon_t Posted July 2, 2015 Author Report Posted July 2, 2015 Yeah kev, that's what I did. Cut thin strips on the TS then took itty-bitty slivers with the #4 until the piece tightly slipped into the saw kerf that it will be reinforcing. In all honestly, the plane was quicker but I'm still gunna throw a fit about it. 1 Quote
wtnhighlander Posted July 2, 2015 Report Posted July 2, 2015 Seen this yet? Planing Thin Strips: https://youtu.be/y0BW-dxYiBY Doesn't get much thinner... Quote
..Kev Posted July 2, 2015 Report Posted July 2, 2015 Yeah kev, that's what I did. Cut thin strips on the TS then took itty-bitty slivers with the #4 until the piece tightly slipped into the saw kerf that it will be reinforcing. In all honestly, the plane was quicker but I'm still gunna throw a fit about it. Well you broke it Quote
Vyrolan Posted July 2, 2015 Report Posted July 2, 2015 Well you broke it The hand tool gods broke it...they're trying to tempt him to the dark side. Quote
Tom Cancelleri Posted July 2, 2015 Report Posted July 2, 2015 You could have done something like this For the low low low price of 1 first born child and your Festool collection 1 Quote
Cliff Posted July 2, 2015 Report Posted July 2, 2015 That Bridge City thing looks like it just might be made of platinum. Quote
Eric. Posted July 2, 2015 Report Posted July 2, 2015 Yeah, it's beautiful. Why the hell would anyone need it? Can't think of which is a bigger waste of money...the nastiest strip club in town or THAT thing. Let me take the rest of the day to think about it. Maybe do some research, too. Quote
Cliff Posted July 2, 2015 Report Posted July 2, 2015 You really don't know until you experience them both. At least the strip club will be cheap. Quote
weithman5 Posted July 2, 2015 Report Posted July 2, 2015 except for doctor bills and child support Quote
Llama Posted July 2, 2015 Report Posted July 2, 2015 Yeah, it's beautiful. Why the hell would anyone need it? Can't think of which is a bigger waste of money...the nastiest strip club in town or THAT thing. Let me take the rest of the day to think about it. Maybe do some research, too. Some things aren't about need. Like the strip club, that is a want. Well, for some... That plane isn't as expensive as most things from that company either. I wouldn't call it affordable, or something anyone needs, but it is out there... Like the strip club... To be clear, the sides (skids) are an option for the block plane. Quote
Eric. Posted July 2, 2015 Report Posted July 2, 2015 Like I said...it's beautiful. Does it take better shavings than a LN or a refurb Stanley? I guess I just have a different point of diminishing returns than others. Of course I do have a couple Blue Spruce marking knives...outrageous. So I guess I can't put my mouth where my money is...but usually LN is about as wasteful as I can get. That BC plane I'd just wanna put on my mantle in my living room. Quote
Llama Posted July 2, 2015 Report Posted July 2, 2015 That's just it. I'm sure it doesn't take any better shaving than a well tuned plane of another brand. To be honest, if it did I'd be shocked. There is something to be said about an original design as well. As a person that is fascinated with mechanical design, I may feel differently about it than someone that is purely looking for a tool for the sole purpose of getting work done. I posted that pic to be kinda funny about the idea of replacing the drum sander with a handplane for certain things. I didn't mean to get in to another pricey plane debate. Quote
Eric. Posted July 2, 2015 Report Posted July 2, 2015 Me neither. And I'm guilty anyway. I own an $800 7 weight fly rod. Problem is, it doesn't feel as good as my $150 7 weight. But it's beautiful... 2 Quote
Llama Posted July 2, 2015 Report Posted July 2, 2015 Me neither. And I'm guilty anyway. I own an $800 7 weight fly rod. Problem is, it doesn't feel as good as my $150 7 weight. But it's beautiful... You should see the watch I just bought. It doesn't even take a shaving 1 Quote
Immortan D Posted July 2, 2015 Report Posted July 2, 2015 You could have done something like this Look at the wings on that plane. Now that's a cheap plane. A Cessna costs a lot more. 1 Quote
Popular Post Vyrolan Posted July 2, 2015 Popular Post Report Posted July 2, 2015 As something of a connoisseur of strip clubs during my 20s....looking back, I'd take the plane. 4 Quote
tim0625 Posted July 3, 2015 Report Posted July 3, 2015 Me neither. And I'm guilty anyway. I own an $800 7 weight fly rod. Problem is, it doesn't feel as good as my $150 7 weight. But it's beautiful... I've done stuff like that Eric....i got a spinning reel for Christmas and it was pretty expensive. I looked at Bass Pro and Cabelas and saw $100 and $150 rods. I'm sure they're great. I went to Walmart and found a rod for $40 that I like just as well. So I have a NASCAR engine sitting in a 73 Impala but it's sporty Quote
bob493 Posted July 15, 2015 Report Posted July 15, 2015 You could have done something like this D Do I want to know how much that thing costs?!?! Quote
Llama Posted July 15, 2015 Report Posted July 15, 2015 Do I want to know how much that thing costs?!?! No. 1 Quote
Brendon_t Posted July 15, 2015 Author Report Posted July 15, 2015 Well amazon fails. Got a cancellation email from them today saying the item is now out of stock. .how they showed 11 in Stock when I ordered it? Who knows Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.